XP Series RFID Keypads and Readers
Product Specifications
- Model: XP, XP-K & XPM
- RFID Keypads and Readers
- Power Supply: 9 – 15 V DC
- Max Current Consumption at 12 V DC: 100 mA
- Reading Distance: Up to 9 cm for XP/XP-K, Up to 8 cm for XPM
- Operating Temperature: External, IP65
- Dimensions: XP & XP-K 107 x 80 x 27 mm & XPM 114 x42 x 27 mm
Product Usage Instructions
Mounting
To mount the device:
- Surface mount the device securely.
- Wrap the wires around the ferrite core provided in the kit to reduce EMI.
Power Supply Connection
Connect the power supply using the following connections:
- +12V IN
- GND (Ground)
LED Indicators
The device features LED indicators for visual feedback. Green LED indicates power input, and Red LED indicates Wiegand output.
RS-485 Connection
Connect the RS-485 lines A(+) and B(-) for communication.
Buzzer and Tamper Connections
Connect the buzzer input and tamper connections as needed for your setup.
Frequently Asked Questions (FAQ)
What is the maximum reading distance of the device?The device has a reading distance of up to 9 cm for XP/XP-K and up to 8 cm for XPM.
XP, XP-K & XPM: RFID Keypads and Readers
INSTALLER’S MANUAL
PRODUCT REFERENCES
XP & XP-K
MOUNTING 
MOUNTING
FERRITE CORE MOUNTING
- Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it is used to reduce the EMI.
TECHNICAL FEATURES
| TECHNICAL FEATURE | |
| POWER SUPPLY | 9 – 15 V DC |
| MAXIMUM CURRENT CONSUMPTION AT 12 | 100 mA |
| SOUND INDICATOR | Internal buzzer/B |
| LED INDICATORS | RGB (Red, Green, Blue)/ |
| USB-TYPE C CONNECTOR | Built-in USB-Type C connector for protocol selection, configuration and firmware update |
| READING DISTANCE | Up to 9cm for XP/XP-K,Up to 8cm for XPM |
| ENVIRONMENTAL RATING/ | Outdoor, IP65/ |
| OPERATING TEMPERATURE | -30°C to +70°C/ -30°C à +70°C
-30°C a +70°C/ -30°C to +70°C da -30°C a +70°C/ -30°C tot +70°C |
| OPERATING HUMIDITY | 5% – 95% relative humidity, non-condensing |
| MOUNTING | Surface mount |
| CABLING CONNECTION | Termina |
| DIMENSIONS (H X W X D) | XP & XP-K 107 x 80 x 27 mm & XPM 114 x42 x 27 |
| Impact protection rating | XP & XPM: IK 11 XP-K: IK 10 |
TERMINALS
XP, XP-K & XPM: TERMINAL BLOCKS AND DIPSWITCH/BORNIERS ET DIPSWITCH 
DIPSWITCH
WIRING
| WIRING | DESCRIPTION DESCRIPTION G | WS4 CONFIGURATION | WIEGAND CONFIGURATION CONFIGURATION WIEGAND |
| Max length Longueur | Cable Length | 80 m | 150 m |
| CABLING | Recommendedcabletype | Multiconductor cable 2 twisted pair with shielding
|
Untwisted, shielded, 0.22 mm2 min. For longer distance above 20 m use larger diameter.
|
SIGNALISATION
| SIGNALISATION | DESCRIPTION DESCRIPTION | WS4 CONFIGURATION E | WIEGAND CONFIGURATION |
| Reader ON-LINE Lecteur En | Reader is in communication with controller | Managed by Controller | Managed by Controller |
| Reader OFF-LINE | Reader lost communication with controller
|
Red LED Blinks fast
|
 |
Documents / Resources
 |
xpr XP Series RFID Keypads and Readers [pdf] Installation Guide XP-MF-W, XP-MF-W-X, XP-MF-RS, XP-MF-RS-X, XP-K-MF-W, XP-K-MF-W-X, XP-K-MF-RS, XP-K-MF-RS-X, XPM-MF-W, XPM-MF-W-X, XPM-MF-RS, XPM-MF-RS-X, XP Series RFID Keypads and Readers, XP Series, XP Series RFID, RFID, RFID Keypads and Readers, RFID Keypads, RFID Readers, Keypads and Readers, Keypads, Readers |
 |
xpr XP Series RFID Keypads and Readers [pdf] Installation Guide XP Series RFID Keypads and Readers, XP Series, RFID Keypads and Readers, Keypads and Readers, Readers |
