I-TYREDOG TD-2700F i-Programming Sensors
Ngaphambi kokuba uqale. Qinisekisa ukuba iibhetri ziphumile kwi-sensors kwaye i-monitor inamandla. Ukucwangcisa abenzi boluvo ngokuthe ngqo kwiMoni yakho (i-bypass relay), kuya kufuneka ucwangcise kwaye usete imonitha yokufumana kwiSensor endaweni yokufumana kwiRelay.
Guqula imonitha ukuze ufumane kwiSensor
- Cinezela kwaye ubambe i Cima (Ekhohlo) iqhosha phantsi imizuzwana embalwa de kuvele imenyu yesethingi yeYunithi.
- Cinezela i Thulisa (Ekhohlo) iqhosha amaxesha ambalwa ukuskrola ngapha kwimenyu C (Uhlobo lwesithuthi) emva koko Cinezela i Isibane Ngasemva (Ekunene) iqhosha ukufaka le menyu.
- I-TYPE ye-TRUCK HEAD kunye neNombolo yakho yoYilo lwangoku iya kuboniswa. Sebenzisa i Cima (Ekhohlo) okanye iBumperature (Embindini) iqhosha ukuskrola kwiziko lesithuthi ukuze utshintshe ukuba kuyafuneka kwaye/okanye ucinezele isibane sangasemva (Iqhosha lasekunene).
- Qinisekisa ukuba UHLOBO lwe-TRAILER lusetelwe ku-NO.1 NONE ngokusebenzisa iqhosha elithi Thulisa (Ekhohlo) okanye loBubushushu (Embindini) ukuskrola kwiziko lesithuthi emva koko ucinezele Isibane Ngasemva (Iqhosha Lasekunene).
- Cinezela i Cima (Ekhohlo) iqhosha ukuqaqambisa umnyama uYamkela kwiSensor emva koko ucinezele i-Backlight (Iqhosha lasekunene) kwaye oku kuya kukubuyisela kwimenyu yokuseta. Qaphela: Xa ufuna ukuyitshintsha ubuyele ku-Yamkela kwi-relay, phinda nje amanyathelo angasentla kwaye uqiniseke ukuba u-Yamkela kwi-Relay igxininiswe emnyama.
Ngoku iqwalaselwe ukuba ifumane ngokuthe ngqo kwi-sensors oza kuyidinga ngoku ukucwangcisa abenzi boluvo kwimonitha. Jonga kwiphepha elilandelayo. Ngaphambi kokwenza oku, cima imonitha kwaye usebenzise iswitshi kwicala lasekunene lemonitha.
IiSensore zeNkqubo zibe yiMonitor
- Cinezela kwaye ubambe i Cima (Ekhohlo) iqhosha phantsi imizuzwana embalwa de kuvele imenyu yesethingi yeYunithi.
- Cinezela i Cima (Ekhohlo) iqhosha ukuskrolela ngapha kwimenyu E (Yongeza iSensom entsha)
- Emva koko iya kubonisa i-SET TYRE ID TRUCK HEAD kwaye uYilo olukhethiweyo luya kuboniswa.
- Ngoku faka ibhetri kuzo zonke izixhobo zoluvo.
I-Monitor iya kubethelwa xa ibhetri ifakiwe kwaye indawo yevili kwimonitha iya kuhamba emnyama. Phinda eli nyathelo kwezinye izinzwa ezintsha de zibe zonke zicwangcisiwe kwaye ii-icon zamavili onke zimnyama. Ukuba abenzi boluvo abaprogramu, qhubeka ususa kwaye ufaka iibhetri de zenze njalo.
Ngoku mhlawumbi utshintshe i-monitor OFF kwaye ON usebenzisa iswitshi kwicala lemonitha. Okanye Cofa iqhosha laBacklight (Ekunene) emva koko iTemperature (Embindini) iqhosha lokuphuma kwimenyu kwimonitha. Vavanya zonke izixhobo zoluvo ziyasebenza kwaye zicwangcisiwe kwaye zisete i-Alarm Warning Thresholds ukuba ziyafuneka.
Amaxwebhu / Izibonelelo
 |
I-TYREDOG TD-2700F i-Programming Sensors [pdf] Incwadi Yomyalelo I-TD-2700F, i-Programming Sensors, i-TD-2700F i-Programming Sensors |
