I-Sistemamt TOUCH 512 DMX Controller

Ulwazi lweMveliso

I-TOUCH 512 / 1024 yipaneli yeglasi efakwe eludongeni kunye ne-DMX yokulawula ukukhanya. Yenzelwe ukulawula izixhobo zokukhanyisa kunye neziphumo ngekhompyutha usebenzisa isoftware efanelekileyo. Isixhobo sibonisa ulawulo olulungileyo lwevili lwemibala ye-RGB, i-CCT, isantya, i-dimmer scenes, ukuya kuthi ga kwi-8 ngephepha lendawo nganye, ukuya kuthi ga kwi-5 enezigcawu ezisi-8 ngephepha ngalinye, ukubuyiswa kwendawo ukuba umbane ucinyiwe/ukuqala okumiselweyo, ukuseta ishedyuli yewotshi ngokulula ngeyure. , usuku, iveki, inyanga, unyaka, kunye nonyaka, kunye nexesha eliphindaphindiweyo phakathi kwemiboniso, ipaneli yokulinda ebonisa oopopayi, i-auto black panel ye-LED emva kwemizuzwana emi-4, i-16-bit kunye nolawulo lwetshaneli elungileyo, kunye nolungelelwaniso lwe-master / ikhoboka. Ukuya kuthi ga kwizixhobo ezingama-32 kunokuqhagamshelwa kungqamaniso.

Imiyalelo yokusetyenziswa kwemveliso

Ngaphambi kokusebenzisa i-TOUCH 512/1024, funda kwaye ulandele iingcebiso zokhuseleko kunye nemiyalelo enikwe kwisikhokelo sokuqalisa ngokukhawuleza. Qinisekisa ukuba iingxowa zeplastiki, ukupakishwa, njl.njl. zilahlwe ngokufanelekileyo kwaye azifikeleli kwiintsana kunye nabantwana abancinci ukuphepha iingozi zokuminxa. Qinisekisa ukuba abantwana abahluli nawaphina amalungu amancinci kwimveliso njengoko benokuginya amaqhekeza kwaye baminxe.

Ukusebenzisa isixhobo:

1. Khetha indawo okanye iphepha ngokucofa kukhetho lwezowuni okanye iqhosha lokukhetha iphepha (kuxhomekeke kumzekelo).
2. Khetha inombolo yomboniso (1-8) yezowuni ekhethiweyo okanye iphepha.
3. Khetha umbala ngokukhetha umbala we-RGB-AW kwindawo ekhethiweyo (kwimo yombala) okanye upholile ukufudumeza umhlophe kwindawo ekhethiweyo (kwimo yeCCT).
4. Cofa ivili ukulungelelanisa ukukhanya (+/-) kwimo yobumnyama.
5. Sebenzisa ivili ukunyenyisa ukuqaqamba kwendawo ekhethiweyo (esebenzayo imizuzwana emi-5) kwimowudi ye-dimmer.
6. Sebenzisa ivili ukukhetha umbala we-RGB-Amber-White. Bamba imizuzwana emi-3 ukufaka imo epholileyo/eshushu emhlophe kwimowudi yombala.
7. Sebenzisa ivili ukuqalisa okanye ukumisa indawo ekhethiweyo kwimo yomboniso.
8. Sebenzisa ivili ukutshintsha isantya sendawo yangoku (esebenzayo imizuzwana emi-5) kwimowudi yesantya.
9. Cofa ivili ukunyenyisa isantya somdlalo wokudlala (+/-) kwimo yesantya.
10. Cofa ukurhoxisa useto lwevili (bamba imizuzwana emi-3 ukuze ucime) kwimo yokuvula/yokucima.
11. Sebenzisa isicholi sevili elibambekayo kunye nokucofa ukulungisa ubushushu bombala, ubunzulu (+/-), isantya (+/-), kunye nemiboniso.

Isixhobo sinokucwangciswa kwaye sidlale kwakhona kusetyenziswa isoftwe efanelekileyo kwaye iqhagamshelwe kwezinye izixhobo ukuze idityaniswe kusetyenziswa i-7-Pin Terminal Pinout okanye i-RJ45 Pinout ngokwemiyalelo enikwe kwincwadi yomsebenzisi.

Ultra obhityileyo eludongeni mountad Iphaneli yeglasi kunye nomlawuli wokukhanyisa we-DMX 
Esi sikhokelo sokuqalisa ngokukhawuleza siqulethe ulwazi olubalulekileyo malunga nokusebenza ngokukhuselekileyo kwemveliso.Funda kwaye ulandele iingcebiso zokhuseleko kunye nemiyalelo enikiweyo. Gcina isikhokelo esikhawulezayo sokuqala kwireferensi yexesha elizayo. Ukuba udlulisela imveliso kwabanye nceda ubandakanye esi sikhokelo sokuqalisa ngokukhawuleza.

Imiyalelo yokhuseleko

Usetyenziso olucetywayo:
Esi sixhobo senzelwe ukulawula izixhobo zokukhanyisa kunye neziphumo ngekhompyutha usebenzisa isoftware efanelekileyo. Nakuphi na okunye ukusetyenziswa okanye ukusetyenziswa phantsi kwezinye iimeko zokusebenza kuthathwa njengento engafanelekanga kwaye kunokubangela ukulimala komntu okanye umonakalo wepropati. Akukho tyala liya kuthathwa ngomonakalo obangelwe kusetyenziso olungafanelekanga.

Ukuphathwa ngokubanzi:

• Ungaze usebenzise amandla xa uphethe imveliso
• Ungaze untywilisele imveliso emanzini
• Sula nje ngelaphu elomileyo elicocekileyo.
• Musa ukusebenzisa izicoci zolwelo ezifana nebenzene, iithinner okanye izinto zokucoca ezinokutsha

Iimbonakalo

Iimpawu zeHardware:
I-512 okanye i-1024 iziteshi ze-DMX imveliso ye-512 (indawo ye-1), i-1024 (imimandla ye-5 eneendibaniselwano zezowuni) Ivili lokulawula kakuhle ivili lokudlala umdlalo, umbala, isantya, i-Dimmer, iMimandla okanye amaPhepha Imemori yangaphakathi + I-Micro SD khadi slot 4 Abafowunelwa kwi-3 ~ 5V yangempela Ikloko yeXesha kunye nekhalenda yomboniso ngamnye USB-C (5V. DC, 0.1A), RJ45 (Abafowunelwa, Master/Ikhoboka) 7 Pin Terminal Block (DMX1, DMX2, DC Power) Power input: 5~36V DC, 0.1A / Imveliso: 5V DC Izindlu: ABS, iglasi (iphaneli) Imilinganiselo : H: 144 (5.67) / W: 97 (3.82) / D: 10 (0.39) Ubushushu bokusebenza: -40 ukuya +85 C ° / -40 ukuya ku-185 F °Iwaranti yaMazwe ngaMazwe: iminyaka emi-5

Ungaze usebenzise imveliso: 

• Kwilanga elithe ngqo
• Kwiimeko zobushushu obugqithisileyo okanye ukufuma
• Kwiindawo ezinothuli kakhulu okanye ezimdaka
• Kwiindawo apho iyunithi inokuba manzi
• Kufuphi nemimandla yemagnethi

Ingozi kubantwana:
Qinisekisa ukuba iingxowa zeplastiki, ukupakishwa… zilahlwe ngokufanelekileyo kwaye azifikeleli kwiintsana nabantwana abancinci. Ingozi yokuminxeka! Qinisekisa ukuba abantwana abahluli naziphi na iindawo ezincinci kwimveliso. Babenokuginya loo maqhekeza baze baminxe!

Iinketho zesixhobo:
Ulawulo lwevili olulungileyo lweMibala yeRGB, iCCT, iSpeed, iiVenkile zeDimmer, ukuya kuthi ga kwi-8 kwiNdawo nganye yamaPhepha, ukuya kuthi ga kwi-5 enezigcawu ezi-8 ngephepha ngalinye ukuBuyiselwa kwakhona kweSigcawu ukuba umbane ucinyiwe / Ukuseta ishedyuli yokuSiseko yeClock ngokulula ngeyure, imini, ngeveki, inyanga, unyaka kunye phinda unyaka. Ixesha lokuFade phakathi kwemifanekiso yomboniso wepaneli elindileyo ebonisa oopopayi Cima ngokuzenzekela ipaneli ye-LED emva kwe-4s 16-bit kunye nolawulo olululo lwetshaneli yeNkosi/Ungqamaniso lwekhoboka, qhagamshela ukuya kwizixhobo ezingama-32

UKUNYUSWA kokufakwa

Ukusebenza kwephaneli

1. Ukukhetha indawo (TOUCH 1024) | Ukukhetha iphepha (TOUCH 512)
   Cofa ukukhetha iindawo/Amaphepha ngawodwa. Bamba ii-2s ukudibanisa iiZowuni
2. Imiboniso #
   Khetha i-1-8 (imiboniso eyi-8 kwindawo nganye okanye ngephepha)
3. Ivili lombala
   Khetha umbala we-RGB-AW wendawo ekhethiweyo (imowudi yoMbala ikhethiwe)
4. Ubushushu bombala
   Khetha okupholileyo ukushushu okumhlophe kwindawo ekhethiweyo (imo yeCCT ikhethiwe)
5. Ubunzulu be-Dimmer
   Cofa ivili ukulungelelanisa ukukhanya (+/-) (imowudi yeDimmer ikhethiwe)
6. Ukusebenza kwemowudi yeDimmer
   Sebenzisa ivili ukulungisa ukukhanya kwindawo ekhethiweyo (Iyasebenza kwii-5s)
7. Ukuqaliswa kwemodi yombala
   Sebenzisa ivili ukukhetha umbala we-RGB-Amber-White. Bamba u-3s ukufaka imo epholileyo/eshushu emhlophe
8. Ukuqaliswa kwemodi yescene
   Sebenzisa ivili ukuqalisa okanye ukumisa umboniso okhethiweyo
9. Imo yesantya Ukuqalisa
   Sebenzisa ivili ukutshintsha isantya sendawo yangoku (Iyasebenza kwii-5s)
10. Isantya somboniso
    Cofa ivili ukunyenyisa isantya somdlalo wokudlala (+/-) (imowudi yesantya ikhethiwe)
11. Layita icima
    Cofa ukurhoxisa useto lwevili (Bamba ii-3s ukuze kuphume mnyama)
12. Isicholi sevili esichukumisayo kunye nokucofa
    Lungisa ubushushu bombala, ubunzulu (+/-) okanye isantya (+/-) kunye nemiboniso

IPin Terminal Pinout

1. DMX1-
2. DMX1+
3. I-GND (DMX 1+2)
4. DMX2-
5. DMX2+
6. GND (Igalelo laMandla)
7. Igalelo laMandla eDC (VCC, 5-36V / (0.1A)

RJ45 iPinout

1. GND
2. Imveliso ye-5V ye-DC-Yeyokubangela
3. 6TRIG A, B, C, D - Izikhonkwane zoQhagamshelwano ezomileyo
4. IDATHA ye-M/S – i-Master/Slave Data
5. I-M/S CLK – Iwotshi eyiNkosi/Ikhoboka

Ukucwangcisa isixhobo kunye nokudlala kwakhona

• Khuphela kwaye ufake isoftware yolawulo lokukhanyisa simahla kunye nabaqhubi be-USB
• Qhagamshela isixhobo sakho kwikhompyuter usebenzisa intambo ye-USB-C ebandakanyiweyo
• Qala isoftware (ujongano lwakho luya kubonwa ngokuzenzekelayo)
• Qwalasela isoftware ngokucwangcisa isibane sakho seDMX
• Imiboniso yeprogram kunye nolandelelwano usebenzisa isofthiwe yokulawula ukukhanya
• Gcina imiboniso ecwangcisiweyo kunye nolandelelwano kwimemori yangaphakathi
• Vala isoftware. Indawo yolawulo yakho ngoku ikulungele ukusebenza kwimowudi ezimeleyo
• Amanani othotho T00200 nangaphezulu

Amaxwebhu / Izibonelelo

I-Sistemamt TOUCH 512 DMX Controller [pdf] Isikhokelo somsebenzisi TOUCH 512, TOUCH 1024, TOUCH 512 DMX Controller, DMX Controller, Controller

Iimbekiselo

• Incwadi yokusebenzisa