I-Microtech IYAYILWA kwi-e-LOOP yokuFumana iSithuthi esingenazingcingo
Iinkcukacha
- Ukuphindaphinda: 433.39 MHz
- Ukhuseleko: I-128-bit AES encryption
- Uluhlu: ukuya kuthi ga kwi-25 yeemitha
- Ubomi bebhetri: ukuya kuthi ga kwiminyaka emi-2
- Uhlobo Lwebhetri: CR123A 3V 1500 m/a Ibhetri yeLithium x1 (ibandakanyiwe)
- Uhlobo lwebhetri yokutshintshwa: CR123A 3V 1500 m/ax 1
Imiyalelo yokusetyenziswa kwemveliso
Inyathelo loku-1 - Ukufakela iintambo kwi-e-TRANS 20
Ukhetho 1. Uluhlu olufutshane lwekhowudi ngemagnethi
- Qhagamshela iingcingo ze-e-Trans ezingama-20 kwiitheminali ezihambelanayo kwinjini yesango.
- Faka amandla i-e-Trans 20, emva koko ucinezele kwaye ukhulule iqhosha le-CODE.
- Beka umazibuthe kwi-CODE recess kwi-e-Loop.
- Iinkqubo ngoku zidityanisiwe, kwaye unako ukususa umazibuthe.
Ukhetho 2. Uluhlu olude lwekhowudi ngemagnethi (ukuya kuma-25 eemitha)
- Phakamisa i-e-Trans 20, emva koko ubeke umazibuthe kwi-code recess ye-e-Loop.
- Iisistim ziya kubhanqa, kwaye ungasusa umazibuthe.
Inyathelo lesi-2 – Ukufaka i-e-LOOP Micro kwi-Driveway
Ukusebenzisa i-5mm ye-concrete drill ye-masonry drill, yomba imingxuma emibini yokukhwela i-40mm ubunzulu, emva koko usebenzise izikrufu ezibonelelweyo ukulungisa kwi-driveway.
OKUBALULEKILEYO: Ungaze ulingane nomthamo ophezulutagIintambo ze-e njengoko oku kunokuchaphazela ukubonwa kwesithuthi se-e-Loop kunye nesakhono soluhlu lwerediyo.
FAQ
- Q: Ndazi njani ukuba ndiyibuyisele nini ibhetri?
- A: Ubomi bebhetri bufikelela kwiminyaka emi-2, kodwa ukuba ubona ukuncipha kokusebenza okanye uluhlu, kuyacetyiswa ukuba ubuyisele ibhetri ngeCR123A 3V 1500 m/ax 1.
- Umbuzo: Ngaba ndinokwandisa uluhlu olungaphaya kweemitha ezingama-25?
- A: Isixhobo senzelwe uluhlu ukuya kwi-25 yeemitha. Ukuzama ukwandisa uluhlu kunokuchaphazela ukusebenza kunye nokuthembeka.
Iinkcukacha
- Ukuphindaphinda: 433.39 MHz
- Uhlobo Lwebhetri: CR123A 3V 1500 m/a Ibhetri yeLithium x1 (ibandakanyiwe)
- Ubomi bebhetri: ukuya kwi-2 iminyaka
- Uluhlu: ukuya kuthi ga kwi-25 yeemitha
- Ukhuseleko: I-128-bit AES encryption
- Uhlobo lwebhetri yokutshintshwa: CR123A 3V 1500 m/ax 1
e-LOOP Micro Fitting Imiyalelo
Ukufakela ngamanyathelo ama-3 alula
Inyathelo loku-1 — Ukufakela iintambo kwi-e-TRANS 20
Ukhetho lwesi-1. Uluhlu olufutshane lwekhowudi kunye nemagnethi
Qhagamshela i-e-Trans 20 iingcingo kwiitheminali ezihambelanayo kwimoto yesango elinikiweyo. Faka amandla i-e-Trans 20, emva koko ucinezele kwaye ukhulule iqhosha le-CODE. I-LED kwi-e-Trans 20 iya kukhanya, ngoku beka umazibuthe kwi-CODE recess kwi-e-Loop, i-LED etyheli kwi-e-loop iya kudanya, kwaye i-LED kwi-e-Trans 20 iya kudanyaza ka-4 amaxesha. . Iinkqubo ngoku zidityanisiwe, kwaye unako ukususa umazibuthe.
Ukhetho lwesi-2. Uluhlu olude lwekhowudi ngemagnethi (ukuya kuthi ga kwi-25 yeemitha) Yandisa i-e-Trans 20, emva koko ubeke umazibuthe kwindawo yokuphumla yekhowudi ye-e-Loop, ikhowudi etyheli ye-LED iya kudanya kube kanye ngoku isusa umazibuthe kwaye i-LED iya kuza iqinile. , ngoku hamba uye kwi-e-Trans 20v kwaye ucinezele kwaye ukhulule iqhosha le-CODE, i-LED etyheli iya kudanya kwaye i-LED kwi-e-Trans 20 iya kudanyaza ka-3, emva kwemizuzwana eyi-15 ikhowudi ye-e-loop LED izakucima.
Inyathelo lesi-2 — Ukufaka i-e-LOOP Micro kwi-Driveway
Ukusebenzisa i-5mm yekhonkrithi yoqheliso lwemasonry, yomba imingxuma emibini yokuxhoma ubunzulu obuyi-40mm, emva koko usebenzise izikrufu zekhonkrithi eziyi-5mm ezibonelelwe ukulungisa indlela yokungena.
KUBALULEKILEYO: Ungaze usondele kumthamo ophezulutagIintambo ze-e, oku kunokuchaphazela ukubonwa kwesithuthi se-e-Loop kunye nesakhono soluhlu lwerediyo.
- Uyilo lweMicrotech
- enquiries@microtechdesigns.com.au
- microtechdesigns.com.au
Amaxwebhu / Izibonelelo
 |
I-Microtech IYAYULA i-e-LOOP iNkqubo yokuFumana iSithuthi esingenazingcingo [pdf] Imiyalelo ELMIC-MOB, ELMIC, e-LOOP Micro Fitting, e-LOOP, Micro Fitting, Fitting, e-LOOP Micro Wireless Vehicle System Detection, e-LOOP, Micro Wireless Vehicle Fitting, Vehicle System System, Detection System |
