I-ARENA YOBUNYE
I-ARGB MIDI TOWER SHOWCASE
INCWADI YOKUSEBENZISA

I-ACESSORY PACK IZIQULATHO

UKUSUSWA KWEPANELI

• Iphaneli yasekhohlo-Tsalela intsimbi ab ngasemva kwephaneli ukuze ukhuphe i-chassis emva koko uyibeke kude.
• Iphaneli yasekunene-Tsalela isidlo kwindawo ephezulu yephaneli ukuze ubandakanyeke kwi-chassis emva koko Ihambe.

UKUFAKWA KWEBHODI YOMAMA

• Lungelelanisa i-motherboard yakho kunye ne-chassis ukuze ufumane indawo apho i-stand-offs kufuneka ifakwe khona. Nje ukuba yenziwe, susa i-motherboard kwaye uqinise i-stand-offs ngokufanelekileyo.
• Faka ipleyiti yakho yebhodi ye-I/O kwindawo yokusika ngasemva kwetyala.
• Beka i-motherboard yakho kwi-chassis, uqinisekise ukuba amazibuko angasemva angena kwi-plate ye-I / O.
• Sebenzisa izikrufu zebhodi yomama ezinikiweyo ukuncamathisela i-motherboard yakho kwi-chassis.

UKUFAKELWA KOMNIKELO WAMANDLA

• Beka i-PSU ngasemva kwetyala, ngaphakathi kwe-PSU shroud.
• Ukulungelelanisa imingxuma kwaye ukhusele ngezikrufu.

IKHADI LEVIDIYO/I-PCI-E UKUFAKA IKHADI

• Susa ngasemva PCI-E amagqubu slot njengoko kuyimfuneko (kuxhomekeke slot ubukhulu ikhadi lakho)
• Beka ngononophelo kwaye utyibilikise ikhadi lakho le-PCI-E endaweni, emva koko ukhuseleke ngezikrufu zekhadi ezifakiweyo.
• Ukuba unyuswa ngokuthe nkqo, ncamathela isibiyeli esithe nkqo seGPU kwiphaneli yePCI-E yangasemva, khusela intambo yesikhuphukeli seKolink PCI-E kwiqhiya yePSU (ethengiswa ngokwahlukeneyo) kwaye uncamathisele intambo kwimotherboard. Susa ngasemva PCI-E amagqubu slot njengoko kuyimfuneko, uze ubeke ngononophelo ikhadi lakho PCI-E, slot kwi-PCI-E isikhuphukeli entabeni kwaye ukhuseleke ngezikrufu ezongezelelekileyo zinikezelwe.

3.5″ UKUFAKELWA kweHDD

• Beka i-3.5″ HDD kwi/phezu kwesibiyeli se-HDD uze ujije xa kukho imfuneko.

2.5″ UKUFAKWA kwe-SSD (NGEMVA)

2.5″ UKUFAKWA kwe-SSD

• Susa isibiyeli ngasemva kwepleyiti yebhodi, ncamathela i-2.5 ″ drive yakho emva koko ulahle kwaye utshixe endaweni.
• Beka i-2.5 ″ HDD/SSD kwi/phezu kwesibiyeli se-HDD kwaye ujije xa kukho imfuneko.

UKUFAKWA KWEFAN OKUPHEZULU

• Susa isihluzo sothuli phezulu kwetyala.
• Lungelelanisa i(izi)feni zakho kwimingxuma yezikrufu kumphezulu wetshisi kwaye ukhuseleke ngezikrufu.
• Buyisela isihluzo sakho sothuli xa sele sikhuselekile.

UKUFAKELWA KWEFAN NGEcala/ngasemva

• Lungelelanisa ifeni yakho kwimingxuma yesikrufu kwi-chassis kwaye ukhuseleke ngezikrufu.

UKUFAKWA KWERADIATOR YOKUXOLISA AMANZI

• Khusela iifeni kwiradiyetha, emva koko uqinise iradiyetha ngaphakathi kwi-chassis ngokukhusela ngezikrufu ezivela ngaphandle.

I/O UKUFAKWA KWEPHANSI

• Khangela ngononophelo ukuleyibhelishwa kwekhonkco nganye kwiphaneli ye-I/O ukuchonga umsebenzi wabo.
• Ngokunqamleza ireferensi kunye ne-motherboard manual ukuze ufumane indawo apho ucingo ngalunye kufuneka lufakwe khona, emva koko ukhusele enye ngexesha. Nceda uqinisekise ukuba zifakwe kwi-polarity echanekileyo ukuphepha ukungasebenzi okanye umonakalo.

Uphawu lwe-WEEE lubonisa ukuba le mveliso kufuneka ingalahlwa nenkunkuma eqhelekileyo yasekhaya. Ngokuchithwa ngokuchanekileyo kwale mveliso, uya kunceda ukukhusela okusingqongileyo. Ngolwazi oluthe vetshe malunga nokulahlwa kwale mveliso, nceda uqhagamshelane nomasipala wendawo yakho, inkonzo yakho yokulahla inkunkuma okanye ivenkile othenge kuyo imveliso.

I-Pro Gamersware GmbH
GaufstraBe 1, 10589 Berlin, Deutschland
info@gamersware.com
+49(0)30 83797272
www.kolink.eu
support@kolink.eu

Amaxwebhu / Izibonelelo

KOLINK 230829 Unity Arena ARGB Midi Tower Showcase [pdf] Incwadi yokusebenzisa 230829 Unity Arena ARGB Midi Tower Showcase, 230829, Unity Arena ARGB Midi Tower Showcase, ARGB Midi Tower Showcase, Midi Tower Showcase, Tower Showcase, Showcase

Iimbekiselo

• Incwadi yokusebenzisa