EBYTE ME31-XXXA0006 Network I/O Networking Module

This manual may be updated with product improvements, please refer to the latest version of the manual! Chengdu Yibaite Electronic Technology Co., Ltd. reserves the final interpretation and modification rights for all contents in this instruction!

Ngaphezuluview

Intshayelelo yeMveliso
I-ME31-XXXA0006 yimodyuli yothungelwano lwe-I/O yenethiwekhi eneziphumo ze-analog ezi-6 (0-20mA/4-20mA) kwaye ixhasa iprotocol ye-Modbus TCP okanye i-modbus RTU protocol yokufunyanwa nokulawula. Isixhobo sinokusetyenziswa njengesango le-Modbus elilula (thumela ngokuzenzekelayo imiyalelo kunye needilesi ze-Modbus ezingezizo ezendawo nge-serial port/network port).

Iimpawu eziSebenzayo

• Inkxaso yomgangatho weModbus RTU protocol kunye neModbus TCP protocol;
• Ixhasa isoftware yoqwalaselo eyahlukeneyo / i-PLC / isikrini sokuchukumisa;
• RS485 ulawulo lokufumana I/O;
• I-RJ45 yokulawula ukufumana i-I / O, inkxaso ye-4-way host access;
• Inkxaso ye-OLED ukubonisa ukubonisa ulwazi lwesimo, kunye nokuqwalasela iiparitha zesixhobo ngokusebenzisa amaqhosha;
• 6 iziphumo ze-analog (0-20mA/4-20mA);
• Ixhasa idilesi yeModbus yesiko;
• Inkxaso yolungelelwaniso lwe-8 ye-baud eqhelekileyo;
• Inkxaso ye-DHCP kunye ne-IP emileyo;
• Ukuxhasa umsebenzi we-DNS, isisombululo segama lesizinda;
• Inkxaso yomsebenzi wesango le-Modbus;

IDiyagram ye-Topology yeSicelo seMveliso

Ukusetyenziswa ngokukhawuleza

【Qaphela】 Olu vavanyo kufuneka luqhutywe ngeparameters zefektri ezihlala zikhona.

Ukulungiswa kwesixhobo

Le theyibhile ilandelayo idwelisa izinto ezifunekayo kolu vavanyo:

 

Uqhagamshelo lwesixhobo

RS485 uqhagamshelo

Phawula: Xa i-485 ibhasi ye-high-frequency signal ihanjiswa, i-wavelength yesignali ifutshane kunomgca wokuhambisa, kwaye umqondiso uya kwenza i-wave wave ebonakalisiweyo ekupheleni komgca wokuhambisa, oya kuphazamisa umqondiso wokuqala. Ngoko ke, kuyimfuneko yokongeza i-resistor terminal ekupheleni komgca wokuhambisa ukuze isignali ingabonakali emva kokufikelela ekupheleni komgca wokuhambisa. Ukuxhatshazwa kwe-terminal kufuneka kufane nokuphazamiseka kwentambo yonxibelelwano, ixabiso eliqhelekileyo liyi-120 ohms. Umsebenzi wayo kukuhambelana nokuphazamiseka kwebhasi kunye nokuphucula ukuchasana nokuphazamiseka kunye nokuthembeka konxibelelwano lwedatha.

Uqhagamshelo lwemveliso ye-analog ye-AO

Ukusetyenziswa okulula

Iintambo: The computer is connected to the RS485 interface of ME31-XXXA0006 through USB to RS485, A is connected to A, and B is connected to B.
Uthungelwano: Insert the network cable into the RJ45 port and connect to the PC.
Ukunikezwa Amandla: Use DC-12V switching power supply (DC 8~28V) to power ME31-XXXA0006.

Uqwalaselo lweparameter

Inyathelo 1: Guqula idilesi ye-IP yekhompyuter ihambelane nesixhobo. Apha ndiyilungisa kwi-192.168.3.100 ukuqinisekisa ukuba ikwicandelo elifanayo lenethiwekhi njengesixhobo kwaye i-IP yahlukile. Ukuba awukwazi ukuqhagamshela kwisixhobo emva kwamanyathelo angasentla, nceda ucime i-firewall kwaye uzame kwakhona;Inyathelo 2: Vula umncedisi womnatha, khetha umxhasi we-TCP, faka i-remote host IP192.168.3.7 (i-parameter ehlala ikhona), faka inombolo ye-port 502 (i-default parameter), kwaye ukhethe i-HEX ukuthumela.

Control Testing

Ulawulo lwe-Modbus TCP

Sebenzisa umncedisi womnatha ukulawula imveliso yokuqala ye-AO ye-ME31-XXXA0006 ukuya kwi-10mA.

Eminye imisebenzi inokuvavanywa ngemiyalelo ekwitheyibhile engezantsi.

Ulawulo lwe-Modbus RTU

Sebenzisa i-serial port umncedisi ukufunda imveliso ye-AO1 yangoku ye-ME31-XXXA0006.

Eminye imisebenzi inokuvavanywa ngemiyalelo ekwitheyibhile engezantsi.

Inkcazo yobuGcisa

Iinkcukacha

Udidi	Igama	Iiparamitha
Ukunikezwa Amandla	Umsebenzi weVoltage	DC8～28V
	Isalathisi samandla	Blue LED isalathisi
Uthotho lwezibuko	Unxibelelwano Ujongano	RJ45, RS485
	Ireyithi yeBaud	9600bps (inokwenziwa ngokwezifiso)
	Umgaqo-nkqubo	Standard Modbus TCP, Modbus RTU protocol
IMODBUS	Idilesi yesixhobo	Can be modified by Modbus command and host ikhompyutha
Imveliso ye-AO	Number of AO imijelo	6 indlela
	Uhlobo lwemveliso ye-AO	Imveliso yangoku, uxhumano lwe-2-wire
	Uluhlu lwemveliso ye-AO	0～20mA \4～20mA
	Isisombululo se-AO	16 amasuntswana
	Ukuchaneka kwemveliso	3‰
	Isalathisi semveliso	Ukubonisa isikrini se-OLED
Okunye	Ubungakanani bemveliso	121mm * 72mm * 34mm (L*W*H)
	Ubunzima bemveliso	135 ±5 g
	Ubushushu bokusebenza kunye ukufuma	-40 ～ +85℃, 5% ～ 95%RH (no imbuyekezo)
	Ugcino ubushushu kunye nokufuma	-40 ～ +105℃, 5% ～ 95%RH (no imbuyekezo)
	Indlela yokufakela	Ufakelo lwe-Din-rail

Isixhobo seParameters esiMiselweyo

Udidi	Igama	Iiparamitha
Iiparamitha ze-Ethernet	Imo yokusebenza	Iseva ye-TCP (ukuya kuthi ga kwi-4-ndlela yokufikelela kumxhasi)
	IP yendawo	192.168.3.7
	izibuko lendawo	502
	Imaski yesubnet	255.255.255.0
	Idilesi yesango	192.168.3.1
	I-DHCP	Vala

	I-MAC yoMthonyama	Imiselwe yitshiphu (elungisiweyo)
	IP ekujoliswe kuyo	192.168.3.3
	Izibuko ekujoliswe kulo	502
	Iseva ye-DNS	114.114.114.114
	Ukulayisha okusebenzayo	Vala
Iiparamitha zothotho	Ireyithi yeBaud	9600bps (8 iintlobo)
	Khangela indlela	Akukho (okungagqibekanga), Odd, nkqu
	Idatha encinci	8
	Yeka kancinci	1
MODBUS iparamitha	I-Modbus master-khoboka	Ikhoboka
	Idilesi	1

Mechanical Dimensional umzobo

Inkcazo yokukhanya kwePort kunye nesalathisi

Hayi.	Ileyibhile	Zekelisa
1	TX (LED)	Uthotho lwezibuko thumela idatha yesalathisi ukukhanya
2	RX (LED)	Uthotho izibuko ukufumana isalathisi ukukhanya
3	LINK (LED)	Isibane soqhagamshelwano lwenethiwekhi
4	NET (LED)	Ukuthumela idatha yenethiwekhi kunye nokufumana isalathisi sokukhanya
5	PWR (LED)	Isalathisi sokungena kwamandla
6	GND	Ipali engalunganga yetheminali yokufakwa kwamandla, DC 8V ~ 28V, 5.08mm Phoenix Indawo yokukhwelela.
7	VCC	Positive pali igalelo terminal amandla, DC 8V ~ 28V, 5.08mm Phoenix Indawo yokukhwelela.
8	AO3	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 3, 5.08mm i-terminal yasePhoenix.
9	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 3, 5.08mm Phoenix terminal.
10	AO4	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 4, 5.08mm i-terminal yasePhoenix.
11	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 4, 5.08mm Phoenix terminal.
12	AO5	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 5, 5.08mm i-terminal yasePhoenix.
13	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 5, 5.08mm Phoenix terminal.
14	AO6	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 6, 5.08mm i-terminal yasePhoenix.
15	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 6, 5.08mm Phoenix terminal.
16	I-Ethernet	Ujongano lwe-Ethernet, ujongano oluqhelekileyo lwe-RJ45.
17	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 2, 5.08mm Phoenix terminal.

18	AO2	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 2, 5.08mm i-terminal yasePhoenix.
19	NGOKUPHELELEYO	Imveliso ye-analog yangoku (ipali engalunganga), itshaneli 1, 5.08mm Phoenix terminal.
20	AO1	Imveliso ye-analog yangoku (ipali ephilileyo), itshaneli 1, 5.08mm i-terminal yasePhoenix.
21	GND	Umhlaba womqondiso, i-5.08mm yetheminali yasePhoenix.
22	485-A	I-A ye-serial port idityanisiwe kujongano lwe-A lwesixhobo sangaphandle, kunye netheminali yasePhoenix eyi-5.08mm.
23	485-B	I-B ye-serial port iqhagamshelwe kujongano lwe-B lwesixhobo sangaphandle, kunye netheminali yasePhoenix eyi-5.08mm.

Intshayelelo yoMsebenzi weMveliso

Imveliso ye-AO

Uluhlu lwemveliso ye-AO
Imveliso ye-Analog (AO), uhlobo lwemveliso lwangoku lunokuqwalaselwa njenge-0 ~ 20mA okanye i-4 ~ 20mA, ukuchaneka ngu-3‰, kwaye isisombululo si-16 bits.
Amandla-kwixabiso elingagqibekanga lemveliso linokusetwa (xa imo yokusebenza itshintshiwe, ixabiso lamandla liya kuphuma ngokwelona xabiso liphantsi loluhlu lwangoku).

Isango leModbus
Isixhobo sinokuthumela ngokuphandle imiyalelo ye-Modbus engeyiyo eyemveli ukusuka kuthungelwano/uthotho lwezibuko ukuya kwizibuko lothotho/uthungelwano, kwaye imiyalelo yendawo yeModbus iphunyezwa ngokuthe ngqo.

Ukuguqulwa kweprotocol yeModbus TCP/RTU

Emva kokuba ivuliwe, idatha ye-Modbus TCP kwicala lenethiwekhi iya kuguqulwa kwidatha ye-Modbus RTU.

Uhluzo lwedilesi yeModbus
Lo msebenzi ungasetyenziswa xa isoftware ethile yomkhosi okanye isikrini soqwalaselo sisetyenziswa njengenginginya ukufikelela kwi-port ye-serial yesixhobo, kwaye umsebenzi wesango wesixhobo usetyenziswa, ikhoboka lisekupheleni komnatha, kwaye i-Modbus TCP kwi-RTU umsebenzi ivuliwe. Amakhoboka amaninzi ebhasini anokubangela ukubhideka kwedatha. Ngeli xesha, ukwenza idilesi yokucoca inokuqinisekisa ukuba kuphela idilesi echaziweyo inokudlula kwisixhobo; xa iparameter ingu-0, idatha iya kuhanjiswa ngokucacileyo; xa iparameter 1-255, kuphela iseti data idilesi umatshini ikhoboka.

INkcazelo yeSakhelo seSakhelo seNkqubo yeModbus TCP
TCP ifomathi yesakhelo:

I-ID yentengiselwano	Isazisi seProtocol	Ubude	Idilesi yesixhobo	Ikhowudi yokusebenza	Icandelo ledatha
2 bit	2 bit	N+2 bit	1 bit	1 bit	N Kancinci

•  Transaction ID: It can be understood as the serial number of the Generally, 1 is added after each communication to distinguish different communication data messages.
• Protocol identifier: 00 00 means Modbus TCP
• Length: Indicates the length of the next data in

Example: fumana imo ye-DI

01 00	00 00	00 06	01	02	00 00 00 04
I-ID yentengiselwano	Isazisi seProtocol	Ubude	Idilesi yesixhobo	Ikhowudi yokusebenza	Icandelo ledatha

Inkcazelo yesakhelo sedatha yeModbus RTU

 ifomathi yesakhelo se-RTU:

Idilesi yesixhobo	Ikhowudi yokusebenza	Icandelo ledatha	Check codeCRC
1 bit	1 bit	N Kancinci	2 bit

Example: fumana umyalelo wesimo se-DI

01	02	00 00 00 04	79 C9
Idilesi yeModbus yesixhobo	Ikhowudi yokusebenza	Icandelo ledatha	Ikhowudi yokutshekisha ye-CRC

Ulwazi lwemodyuli yesiko

Idilesi yeModbus

Idilesi yesixhobo ngu-1 ngokungagqibekanga, kwaye idilesi inokuguqulwa, kwaye uluhlu lwedilesi luyi-1-247.

Igama lemodyuli

Abasebenzisi banokumisela igama lesixhobo ngokweemfuno zabo ukwahlula, ukuxhasa isiNgesi, ifomathi yedijithali, ukuya kuthi ga kwi-20 bytes.

Iiparamitha zenethiwekhi

Ngaphandle kokuba kucaciswe ngenye indlela: iparameters eziyelelene kumsebenzi wothungelwano zilandelayo zingagqibekanga kwi-IPV4-eyelelene iparamitha.

• MAC of the device: the user can obtain it by reading the specified register, and this parameter cannot be
• Idilesi ye-IP: isixhobo idilesi ye-IP, iyafundeka kwaye iyabhaleka.
• Ichweba le-Modbus TCP: inombolo yezibuko yesixhobo, efundekayo kwaye ebhalekayo.
• Subnet mask: address mask, readable and
• Idilesi yesango:
• I-DHCP: Misela indlela ifowuni efumana ngayo i-IP: i-static (0), i-dynamic (1).
• Target IP: When the device works in client mode, the target IP or domain name of the device
• Destination port: When the device is working in client mode, the destination port of the device
• Iseva ye-DNS: Isixhobo sikwimowudi yomxhasi kwaye isombulula igama lesizinda somncedisi.
• Module working mode: switch the working mode of the module. Server: The device is equivalent to a server, waiting for the user’s client to The maximum number of connections is 4. Client: The device actively connects to the target IP and port set by the user.
• Active upload: When this parameter is not 0, and the device is in the client mode, the discrete input status of the device will be uploaded to the server when it is connected for the first time or the input changes, and the analog input will be uploaded according to the configured time

Uthotho lweZibuko iiParamitha

 Iiparamitha zokuseta unxibelelwano olulandelelanayo:

Iiparamitha ezihlala zikhona:

• Baud rate: 9600 (03); Data bit: 8bit;
• Yima kancinci: 1bit;
• Jonga idijithi: AYIKHO(00);

Ixabiso leBaud:

Itheyibhile yexabiso lekhowudi ye-Baud
0x0000	1200
0x0001	2400
0x0002	4800
0x0003 (ehlala ikho)	9600
0x0004	19200
0x0005	38400
0x0006	57600
0x0007	115200

Jonga idijithi:

Jonga iDijithi
0x0000(okuhlala kukho)	AKUKHO
0x0001	ODD
0x0002	KWAKUNYE

Umboniso we-OLED kunye noqwalaselo lwepharamitha

The display interface includes an information display page (AO input value display page) and a parameter setting page (some parameters).

Ujongano lokuBonisa ulwazi

Including the AO input value display page, short press the up and down buttons to switch the interface.

Isixhobo separameter yokubonisa ujongano

Press the left button or right button to enter the password input interface, complete the correct password input, and the device parameter information interface will be displayed (password interface: default password: 0000; short press the middle to verify the password, the left and right buttons switch the password bit, and the up and down buttons switch the current bit value, the password has a total of 4 digits, and each input is a number ranging from 0- 9):

Ujongano lolungiselelo lweparameter ukusuka phezulu ukuya ezantsi lu:

1. Idilesi yeModbus;
2. Umlinganiselo weBaud;
3. Amasuntswana edatha;
4. Jonga iDijithi;
5. Yima kancinci;
6. Izibuko lendawo;
7. Idilesi ye-IP yendawo;
8. Isango;
9. Imaski engaphantsi komnatha;
10. I-DNS;
11. Idilesi ye-MAC;
12. I-DHCP;
13. IP ekujoliswe kuyo;
14. Indawo yokufikela;
15. Ukuguqulwa kweprotocol ye-Modbus TCP/RTU;
16. ukulayisha okusebenzayo;
17. Modbus address filtering;

Isixhobo soNxibelelwano lweParameter yoLungiselelo

Press and hold the confirmation button to enter the password input interface, complete the correct password input, and enter the configuration interface (password interface: default password: 0000; short press the middle to verify the password, the left and right buttons switch the password bit, and the up and down buttons switch the value of the current bit , the password has a total of 4 digits, and each input range is a number from 0-9).

• Khetha into yokuseta, ngenisa iphepha loqwalaselo lweparameter kwaye ucofe ngokufutshane amaqhosha aphezulu nasezantsi ukutshintsha into yokucwangcisa;
• Khetha umba wokuseta, cofa okufutshane ukuqinisekisa okanye ukucofa ekunene, umba wokuseta ufumana ikhesa ukumela ukhetho kwaye ungenise umba wokuseta;
• Lungisa ixabiso lepharamitha: Emva kokukhetha into yokumisela, izitshixo eziphezulu kunye nezantsi zingatshintsha ixabiso okanye ixabiso elikhethiweyo; amaqhosha asekhohlo nasekunene ahambisa isalathisi kumba weparameter;
• Qinisekisa ixabiso leparameter: Emva kokulungelelanisa ixabiso lepharamitha, cofa iqhosha lokungena ukuphuma kwinto yangoku yokuseta.

Save parameter settings and restart: After setting the parameters, move the cursor to save and restart, then short press the confirmation key to enter the confirmation save and restart state. Short press the confirmation key (press other keys to exit the confirmation state) to save the parameters and restart the device.

Exit without saving parameters: move the cursor to exit, then short press the confirmation key to enter the confirmation exit state, short press the confirmation key (press other keys to exit the confirmation state), and then exit the parameter configuration interface without saving the parameters.

Phakathi kwazo, i-data bit and stop bit ayikwazi ukusetwa. Emva kokuba imodi ye-DHCP ivuliwe, idilesi ye-IP yendawo, isango, kunye ne-subnet mask ayikwazi ukuqwalaselwa kwaye inikwe kuphela ngumzila;

Ukulala kwesikrini

The device screen has a sleep function, which is off by default and can be set to on in the configuration interface.

In any interface, when there is no button operation for 180 seconds, the screen will enter the sleep mode. At this time, the interface displays Ebyte robot. Press any button can exit the sleep mode.

Xa isikrini sikwimo yokulala, ukusebenza kakuhle kweenkqubo zesixhobo kuya kuphuculwa.

Uqwalaselo lweparameter yeMODBUS 

Phawula: According to the usage requirements, some software (such as KingView) ifuna ukongeza +1 xa uguqulela ukusuka kwihexadecimal ukuya kwidesimali ukuze isebenze kwiirejista (onke amanani edesimali kwitheyibhile sele ehlengahlengiswe nge +1).

Uluhlu loBhaliso lwe-AO

Bhalisa umsebenzi	Bhalisa idilesi (HEX)	Bhalisa idilesi (DEC)	Uhlobo lokubhalisa	Inani	Sebenza	Uluhlu lweDatha/Amagqabantshintshi	Ikhowudi yokusebenza enxulumeneyo
I-Analog ixabiso lemveliso	0x0000	4-0001	Ukubamba irejista	12	RW	32-bit uhlobo lwendawo edadayo, iyunithi mA	R:0x03 W:0x10
Imveliso ye-analog ixabiso	0x0064	4-0101	Ukubamba irejista	6	RW	Ubungakanani bemveliso yesitishi se-analog, i-2-byte integer, iyunithi (uA)	R:0x03 W:0x10
Imo yemveliso ye-AO	0x0514	4-1301	Ukubamba irejista	6	RW	AO channel output range 0x0000: 0~20mA 0x0001: 4-20mA	R：0x03 W：0x06、0x10
AO amandla- kwixabiso lokuqala lemveliso	0x00C8	4-0201	Ukubamba irejista	12	RW	Output engineering quantity when the analog channel is powered on, a 4-byte floating point number, the default is 0	R 0x03 W 0x10

Iirejista ezinxulumene nemodyuli

Bhalisa umsebenzi	Bhalisa address (HEX)	Bhalisa address (DEC)	Uhlobo lokubhalisa	Inani	Sebenza	Uluhlu lweDatha/Amagqabantshintshi	Ikhowudi yokusebenza enxulumeneyo
Imodyuli idilesi	0x07E8	4-2025	Ukubamba bhalisa	1	RW	Idilesi ye-Modbus, 1～247 configurable addresses	R:0x03 W:0x06
Imodyuli imodeli	0x07D0	4-2001	Ukubamba bhalisa	12	R	Fumana imodeli yangoku	R:0x03
I-Firmware inguqulelo	0x07DC	4-2013	Ukubamba bhalisa	1	R	Fumana inombolo yenguqulo ye-firmware	R:0x03
Imodyuli igama	0x07DE	4-2015	Ukubamba bhalisa	10	RW	Igama lemodyuli elungiselelweyo	R:0x03 W:0x10
Imodyuli phinda Uqalele	0x07EA	4-2027	Ukubamba bhalisa	1	W	Bhala 0x5BB5 ukuze uqalise kwakhona.	W:0x06
Buyisela umzi-mveliso iiparamitha	0x07E9	4-2026	Ukubamba irejista	1	W	Bhala 0x5BB5 ukubuyisela useto lwasefektri.	W:0x06
Uthotho izinga baud	0x0834	4-2101	Ukubamba bhalisa	1	RW	Bona itafile yekhowudi yokulinganisa i-baud, Ukuhlala kukho ngama-9600 (0x0003)	R:0x03 W：0x06、0x10
Serial check idijithi	0x0836	4-2103	Ukubamba irejista	1	RW	0x0000 akukho checksum (ehlala ikho) 0x0001 odd parity 0x0002 ngokulinganayo	R：0x03 W：0x06、0x10

Iirejista ezinxulumene nenethiwekhi

Bhalisa umsebenzi	Bhalisa idilesi (HEX)	Bhalisa idilesi (DEC)	Uhlobo lokubhalisa	Inani	Sebenza	Uluhlu lweDatha/Amagqabantshintshi	Ikhowudi yokusebenza enxulumeneyo
Module MAC idilesi	0x0898	4-2201	Ukubamba irejista	3	R	Isixhobo se-MAC parameters	R:0x03
IP yendawo idilesi	0x089B	4-2204	Ukubamba bhalisa	2	RW	Ukungagqibeki: 192.168.3.7	R:0x03 W：0x06、0x10
izibuko lendawo	0x089D	4-2206	Ukubamba bhalisa	1	RW	1～65535, okungagqibekanga: 502	R:0x03 W：0x06、0x10
Imaski yesubnet idilesi	0x089E	4-2207	Ukubamba irejista	2	RW	Ukungagqibeki: 255.255.255.0	R：0x03 W：0x06、0x10
Isango idilesi	0x08A0	4-2209	Ukubamba bhalisa	2	RW	Ukungagqibeki: 192.168.3.1	R:0x03 W：0x06、0x10

I-DHCP ulungiselelo lwemowudi	0x08A2	4-2211	Ukubamba irejista	1	RW	0x0000 IP emileyo (ehlala ikho) 0x0001 Fumana i-IP ngokuzenzekelayo	R：0x03 W：0x06、0x10
Ekujoliswe kuko IP/domain name	0x08A3	4-2212	Ukubamba irejista	64	RW	String format stored in IP/domain name Ukungagqibeki kwe-IP: 192.168.3.3	R：0x03 W：0x06、0x10
Izibuko leseva	0x08E3	4-2276	Ukubamba bhalisa	1	RW	0-65535, ukungagqibeki 502	R:0x03 W：0x06、0x10
DNS idilesi ye-IP yomncedisi	0x08E4	4-2277	Ukubamba irejista	2	RW	Ukungagqibeki 8.8.8.8	R：0x03 W：0x06、0x10
Imodyuli imo yomsebenzi	0x08E6	4-2279	Ukubamba bhalisa	1	RW	0x0000 imo yeseva 0x0001 imo yomthengi	R:0x03 W：0x06、0x10
Iyasebenza layisha	0x08E7	4-2280	Ukubamba bhalisa	1	RW	0x0000 ikhubazekile, abanye: 1～65535s cycle sending	R:0x03 W：0x06、0x10
MOSBUS TCP/RTU uguqulo yenza	0x08E8	4-2281	Ukubamba irejista	1	RW	0, vala, i-1 evulekileyo yokuguqulwa kweprotocol	R：0x03 W：0x06、0x10
IMODBUS address filtering	0x08E9	4-2282	Ukubamba irejista	1	RW	0: transparent transmission, 1-255: when the data is not local, check the slave address of the command , and it can be passed when it is the misela ixabiso	R：0x03 W：0x06、0x10

 ExampLes yemiyalelo yokusebenza yomyalelo weModbus

Funda isimo sekhoyili (DO).
Sebenzisa imo yecoil yokufunda (01) ikhowudi yokusebenza ukufunda imo yecoil yemveliso, umzekeloample:

01	01	00 00	00 04	I-3D C9
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa kuqala idilesi	Inani leekhoyili eziphumayo ezifundiweyo	CRC khangela ikhowudi

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	01	01	01	90 48
Idilesi yeModbus	Ikhowudi yokusebenza	Iibhayithi zedatha	Idata yesimo esibuyisiweyo	Ikhowudi yokutshekisha ye-CRC

Idatha yesimo 01 ebuyiselwe ngasentla ibonisa ukuba imveliso ye-DO1 ivuliwe.

Control coil (DO) karhulumente

Support operation of single coil (05), operation of multiple coils (0F) function code operation. Use the 05 command to write a single command, for example:

01	05	00 00	FF 00	8C 3A
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa kuqala idilesi	Ukuqhubekeka: FF 00 Vala: 00 00	Ikhowudi yokutshekisha ye-CRC

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	05	00 00	FF 00	8C 3A
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa kuqala idilesi	Indlela yokusebenza	Ikhowudi yokutshekisha ye-CRC

Ikhoyili ye-DO1 ivuliwe.

Sebenzisa ikhowudi yokusebenza engu-0F njengomyalelo wokubhala iikhoyili ezininzi, umzekeloample:

01	0F	00 00	00 04	01	0F	Ngo-7E 92
Modbus idilesi	Umsebenzi ikhowudi	Eyokuqala idilesi	Inani le iikhoyili	Iibhayithi zedatha	Lawula idatha yekhoyili	CRC khangela ikhowudi

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	0F	00 00	OOO4	54 08
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa idilesi	Inani leekhoyili	Ikhowudi yokutshekisha ye-CRC

Iikhoyili zivuliwe zonke.

Funda irejista yokubamba

Sebenzisa 03 umsebenzi ikhowudi ukufunda amaxabiso erejista enye okanye ngaphezulu, umzekeloample:

01	03	05 78	00 01	04 DF
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa kuqala idilesi	Inani leerejista ezifundiweyo	Ikhowudi yokutshekisha ye-CRC

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	03	02	00 00	B8 44
Idilesi yeModbus	Ikhowudi yokusebenza	Iibhayithi zedatha	Idatha ebuyisiwe	Ikhowudi yokutshekisha ye-CRC

I-00 00 engasentla ithetha ukuba i-DO1 ikwimowudi yokuphuma kwinqanaba.

Irejista yokubamba umsebenzi

Support operation of single register (06), operation of multiple registers (10) function code operation.

Sebenzisa ikhowudi yokusebenza ye-06 ukubhala irejista yokubamba enye, umzekeloample: seta indlela yokusebenza ye DO1 kwindlela yokubetha:

01	06	05 78	00 01	C8 DF
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa idilesi	Bhala ixabiso	Ikhowudi yokutshekisha ye-CRC

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	06	05 78	00 01	C8 DF
Idilesi yeModbus	Ikhowudi yokusebenza	Bhalisa idilesi	Bhala ixabiso	Ikhowudi yokutshekisha ye-CRC

Ukuba ukuguqulwa kuphumelele, idatha kwirejista ye-0x0578 yi-0x0001, kwaye imodi yokuphuma kwe-pulse ivuliwe.

Sebenzisa ikhowudi yokusebenza ye-10 ukubhala imiyalelo yerejista yokubamba ezininzi, umzekeloample: cwangcisa indlela yokusebenza ye DO1 kunye ne DO2 ngexesha elinye.

01	10	05 78	00 02	04	00 01 00 01	5A7D
Modbus idilesi	Umsebenzi ikhowudi	Bhalisa intloko idilesi	Inani le iirejista	Inani leebhayithi ze idatha ebhaliweyo	Idatha ebhaliweyo	CRC khangela ikhowudi

Emva kokuthumela lo myalelo ungasentla kwisixhobo ngebhasi ye-485, isixhobo siya kubuyisela la maxabiso alandelayo:

01	10	05 78	00 02	C1 1D
Idilesi yeModbus	Umsebenzi ikhowudi	Bhalisa idilesi	Inani leerejista	Ikhowudi yokutshekisha ye-CRC

Ukuba ukuguqulwa kuphumelele, amaxabiso eerejista ezimbini ezilandelelanayo eziqala ngo-0x0578 yi-0x0001 kunye ne-0x0001 ngokulandelelanayo, ukumakisha i-DO1 kunye ne-DO2 ukwenzela ukuba i-pulse output isebenze.

Uqwalaselo lweSoftwe

Ukufumana kunye noLawulo

Inyathelo 1: Qhagamshela isixhobo kwisoftware yoqwalaselo.

1. Ungaqwalasela isixhobo ngokukhetha ujongano (uthotho lwezibuko/izibuko lothungelwano); ukuba ukhetha izibuko lenethiwekhi, kufuneka kuqala ukhethe ikhadi lenethiwekhi kwaye emva koko ukhangele isixhobo.
2. Ukuba ukhetha izibuko lothotho, kufuneka ukhethe uthotho lwenombolo yezibuko, kunye nomlinganiselo webhaud ofanayo, bit data, stop bit, parity bit kunye nedilesi yecandelo lokukhangela uluhlu njengesixhobo, kwaye emva koko ukhangele.Inyathelo 2: Khetha isixhobo esihambelanayo. Inyathelo 3: Cofa isixhobo kwi-intanethi ukungena esweni IO. Oku kulandelayo yi-IO esweni umboniso wesikrini.

Ujongano loqwalaselo lweParameter

Inyathelo 1: Qhagamshela isixhobo ubhekiselele ku "Ukufumana kunye noLawulo".
Inyathelo 2: Ungaqwalasela iparameters zesixhobo, iparameters network, DI parameters, AI parameters, DO parameters, and AO parameters (for example: ukuba icebo alinamsebenzi weAO, iiparamitha zeAO azinabumbeko)

Inyathelo 3: Emva kokuqwalasela iiparamitha, cofa Khuphela iiParamitha. Emva kokuba umyalezo okhawulezayo kwisiphumo selog ubonisa ukuba iiparameters zigcinwe ngempumelelo, cofa Qala kwakhona isixhobo. Emva kokuba isixhobo siqale ngokutsha, iiparamitha ezilungisiweyo ziya kusebenza.

Hlaziya imbali 

Inguqulelo	Umhla wohlaziyo	Amanqaku oHlaziyo	Indoda yesondlo
1.0	2023-6-6	Inguqulelo yokuqala	LT
1.1	2024-10-18	Uhlaziyo lomxholo	LT

Ngathi

Uxhaso lobuchwepheshe: support@cdebyte.com
Amaxwebhu kunye ne-RF Setting link download download: https://www.fr-ebyte.com
Umnxeba: + 86-28-61399028
Ifeksi: 028-64146160
Web：https://www.fr-ebyte.com
Address： Innovation Center D347, 4# XI-XIN Road, Chengdu, Sichuan, China

Ilungelo lokushicilela ©2012–2024, Chengdu Ebyte Electronic Technology Co.,Ltd.

Amaxwebhu / Izibonelelo

EBYTE ME31-XXXA0006 Network I/O Networking Module [pdf] Incwadi yokusebenzisa ME31-XXXA0006, ME31-XXXA0006 Network IO Networking Module, ME31-XXXA0006, Network IO Networking Module, Networking Module, Module

Iimbekiselo

• Incwadi yokusebenzisa