Danfoss Yakha iSoftware ngeLog yedatha

Isikhokelo sokuSebenza

Uyenza njani isoftware ngelog yedatha

• Isishwankathelo
  • Kwisoftware eyenziwe kusetyenziswa iMCXDesign, kuyenzeka ukongeza umsebenzi welog yedatha. Lo msebenzi usebenza kuphela nge-MCX061V kunye ne-MCX152V. Idatha igcinwa kwimemori yangaphakathi okanye/kunye kwimemori yekhadi le-SD kwaye inokufundwa nge WEB uqhagamshelo okanye ngePC usebenzisa inkqubo yedecode.

Inkcazo 

MCXDesign inxalenye

1. Kwi-"LogLibrary" kukho izitena ezithathu ezenza ukongezwa kwedatha kwisoftware eyenziwe kusetyenziswa iMCXDesign: isitena esinye seseziganeko kwaye ezinye zenza ukuba kukhethwe izinto eziguquguqukayo kunye nememori yokugcina idatha.
2. Isoftware enokufakwa kwedatha ibonakala njengomfanekiso ongezantsi:
   Phawula: Uphawu lokuloga kwedatha lufumaneka kuphela kwihardware yeMCX (ayinakulinganiswa kusetyenziswa ukulinganisa isoftwe).
3. Isitena se "EventLog" kunye ne "SDCardDataLog32" isitena sigcina file kwimemori ye-SD, kunye ne "MemoryDataLog16" isitena sigcina i file kwimemori yangaphakathi yeMCX.
   Phawula: Ngolwazi olongezelelweyo, nceda ubhekiselele kuncedo lwezitena.

Ukufunda i file ngenkqubo yedecode

1. I files igcinwe kwikhadi le-SD inokufundwa nge WEB ukudibanisa okanye ukusebenzisa ibhetshi file. Nangona kunjalo, i file igcinwe kwimemori yangaphakathi inokufundwa kuphela WEB.
2. Ukufunda i files kwikhadi le-SD usebenzisa inkqubo ye-decode, khuphela ifolda ethi "DecodeLog" ekhoyo kwindawo ye-MCX kwaye uyigcine kwidiski ye-C:
3. Khipha imemori khadi kwi-MCX kwaye ukope kwaye uncamathisele i files kwikhadi le-SD kwi "DecodeLog/Disck1" ifolda:
4. Ukusuka kwifolda ethi "DecodeLog", sebenzisa ibhetshi file "decodeSDCardLog". Oku kuzakuvelisa i.csv files ngedatha ekhowudiweyo:
5. Iziganeko zirekhodwa kwiziganeko.csv file. Kukho iikholamu ezintandathu:
   •  Ixesha lomsitho: ixesha lomsitho (qala i-alm, yeka i-alm, utshintsho lweeparamitha kunye notshintsho lwe-RTC)
   • EventNodeID: i-ID ye-MCX
   • Uhlobo loMnyhadala: inkcazo yamanani yohlobo lwesiganeko
     • -2: Ukusetha kwakhona kwe-alam yembali ye-MCX
     • -3: RTC iseti
     • -4: Qalisa i-alam
     • -5: Misa i-alam
     • 1000: Iiparamitha ziyatshintsha (qaphela: utshintsho lunokubonwa kuphela xa lwenziwe ngojongano lomsebenzisi)
   • IVar1: inkcazo ngamanani oguquguqukayo. Ukuyicima, vula i-“AGFDefine.c” file kwi "App" ifolda yesoftware yeMCXDesign. Kule file kukho amacandelo amabini anesalathiso se-ID: elinye leleeparamitha kwaye elinye lele-alam. Ukuba uhlobo lomnyhadala li-1000, bhekisa kuluhlu lweeparamitha zesalathiso; ukuba uhlobo lwesiganeko ngu -4 okanye -5, bhekisa kuluhlu lweealam zesalathiso. Olu luhlu lunamagama aguquguqukayo ahambelana ne-ID nganye (hayi kwinkcazo eguquguqukayo - yenkcazo eguquguqukayo, bhekisa kwi-MCXShape).
   • IVar2: isetyenziswe ukurekhoda ixabiso leparameter phambi nasemva kotshintsho. Eli nani liyi-double integer; kwindawo ephezulu kukho ixabiso elitsha leparameter kwaye kwindawo ephantsi kukho ixabiso elidala.
   • IVar3: ayisetyenziswanga.
6. Ishicilelwe kwi-hidata.csv file zizo zonke iinguqu ezichazwe kwi MCXDesign ngokunxulumene ne sampixesha ngokulandelelana lichazwe kwisitena:

Ukufunda i file in WEB

1. Ukufunda ezi files kwi WEB, sebenzisa iMCX yamva njeWeb amaphepha afumaneka kwi-MCX webindawo. Kwi-Configuration/History menu, seta iiguquguquko zokubeka iliso (max. 15).
2. KuLungiselelo/yeMbali kwimenyu kufuneka uchaze:
   • Indawo: ayibalulekanga.
   • Iiparamitha: ingakhethwa kuphela kwizinto eziguquguqukayo ezigcinwe kwilog file. Olu seto lusetyenziselwa ukuthatha ulwazi malunga nenqaku ledesimali eguquguqukayo kunye neyunithi yomlinganiselo.
   • Umbala: ichaza umbala womgca kwigrafu.
   • File: ichaza i file apho ixabiso eliguquguqukayo lithathwa khona.
   • Isikhundla: indawo (ikholamu) yotshintsho kwi file (jonga kwakhona inqaku lesi-9):
3. Ukusuka kwimenyu yembali, idatha ingenziwa igrafu kwaye ithunyelwe ngaphandle kwi-.csv file:
   • Khetha inguqu kwigrafu.
   • Chaza "Idatha" kunye "nexesha".
   •  Zoba.
   • Thumela ngaphandle ukwenza i.csv file.

Phawula: Igrafu nayo ineziganeko (iiflegi ezityheli); Sebenzisa imouse ukunqakraza iflegi ukuze ufumane ulwazi olongezelelweyo malunga nomsitho.

• Izisombululo zeMozulu
• danfoss.com
• +45 7488 2222

Naluphi na ulwazi, kubandakanywa, kodwa aluphelelanga kulwazi malunga nokukhethwa kwemveliso, ukusetyenziswa kwayo okanye ukusetyenziswa, ukuyila kwemveliso, ubunzima, imilinganiselo, umthamo okanye nayiphi na enye idatha yobugcisa kwiincwadi zemveliso, iinkcazo zeekhathalogu, iintengiso, njl. , ngomlomo, nge-elektroniki, kwi-intanethi okanye ngokukhuphela, kuya kuthathwa njengokufundisa kwaye kuyabophelela kuphela ukuba kwaye ukuya kuthi ga kwinqanaba, ireferensi ecacileyo yenziwe kwikoteyishini okanye kwii-odolo zokuqinisekisa. UDanfoss akanakwamkela naluphi na uxanduva lweempazamo ezinokwenzeka kwiikhathalogu, iincwadana, iividiyo kunye nezinye izinto. I-Danfoss inelungelo lokutshintsha iimveliso zayo ngaphandle kwesaziso. Oku kusebenza nakwiimveliso ezi-odolweyo kodwa aziziswanga ukuba olo tshintsho lunokwenziwa ngaphandle kotshintsho kwifom, i-ht, okanye umsebenzi wemveliso. Zonke iimpawu zokuthengisa kule mpahla ziyipropati yeDanfoss AS okanye iinkampani zeqela leDanfoss. UDanfoss kunye nelogo yeDanfoss ziimpawu zorhwebo zikaDanfoss A/s. Onke Amalungelo Agciniwe.

Amaxwebhu / Izibonelelo

Danfoss Yakha iSoftware ngeLog yedatha [pdf] Isikhokelo somsebenzisi Yakha iSoftware ngeLog yedatha, Yakha iSoftware ngeLog yedatha, iSoftware

Iimbekiselo

• Incwadi yokusebenzisa