ArduCam 12MP IMX477 Mini HQ Imodyuli yeKhamera yeRaspberry Pi yeManuwa yoMnikazi

Le modyuli yekhamera ye-Arducam 12MP IMX477 ye-Raspberry Pi inobungakanani bebhodi yekhamera efanayo kunye nemingxuma enyukayo njengeModyuli ye-Raspberry Pi yeKhamera ye-V2. Yona
ayinakuhambelana kuphela nazo zonke iimodeli zeRaspberry Pi 1, 2, 3 kunye ne4, kodwa kunye neRaspberry Pi Zero kunye neZero 2W, enokusetyenziswa ngokulula ngoqwalaselo olulula.

QHAGAMSHELANA IKHAMERA

1. Faka isidibanisi kwaye uqinisekise ukuba sijongene ne-Raspberry Pi MIPI port. Musa ukugoba intambo ye-flex kwaye uqinisekise ukuba ifakwe ngokuqinileyo.
2. Tyhiliza isinxibelelanisi seplastiki phantsi ngelixa ubambe intambo eguqukayo de isidibanisi sibuyele endaweni
   

I-SPCS

• Ubungakanani: 25x24x23mm
• Isisombululo sisekho: Iimegapixel ezili-12.3
• Iimowudi zevidiyo: Iimowudi zevidiyo: 1080p30, 720p60 kunye ne-640 × 480p60/90
• Ukudityaniswa kweLinux: V4L2 umqhubi okhoyo
• Uluvo: I-Sony IMX477
• Isisombululo senzwa: 4056 x 3040 pixels
• Indawo yomfanekiso woluvo: 6.287mm x 4.712 mm (7.9mm diagonal)
• I-Pixel ubukhulu: 1.55 µm x 1.55 µm
• Uvakalelo lwe-IR: Ukukhanya okubonakalayo
• Ujongano: 2-layini MIPI CSI-2
• I-Hole Pitch: Iyahambelana ne-12mm, 20mm
• Ubude bojoliso: 3.9mm
• I-FOV: 75° (H)
• Nqaba: M12 iNtaba

USEKO SOFTWARE

Nceda uqiniseke ukuba usebenzisa inguqulelo yamva nje yeRaspberry Pi OS. (NgoJanuwari 28th 2022 okanye kamva, inguqulo yeDebian: 11 (bullseye)).

Kubasebenzisi beRaspbian Bullseye, nceda wenze oku kulandelayo:

1. Hlela ubumbeko file: sudo nano /boot/config.txt
2.  Fumana umgca: camera_auto_detect=1, yihlaziyele: camera_auto_detect=0 dtoverlay=imx477
3. Gcina kwaye uqalise kwakhona.

Kubasebenzisi beBullseye abaqhuba kwiPi 0-3, nceda kwakhona:

1.  Vula i-terminal
2. Sebenzisa i-sudo raspi-config
3. Yiya kuKhetho oluPhezulu
4. Nika amandla umzobo weGlamour wokukhawulezisa
5. Qalisa kwakhona iPi yakho.

UKUSEBENZA IKHAMERA

I-ibcamera-sesisixhobo somgca womyalelo ophucukileyo wokuthatha imifanekiso emileyo ngeModyuli yeKhamera ye-IMX477. libcamera-still -t 5000 -o test.jpg Lo myalelo uya kukunika uphila ngaphambiliview yemodyuli yekhamera, kwaye emva kwe-5
imizuzwana, ikhamera iya kubamba umfanekiso omnye omileyo. Umfanekiso uya kugcinwa ngaphakathi
incwadi yakho yasekhaya kunye negama test.jpg.

• t 5000: Live preview imizuzwana emi-5.
• o test.jpg: thatha umfanekiso emva kwangaphambiliview iphelile kwaye uyigcine njenge test.jpg

Ukuba ufuna ukubona i-live preview, sebenzisa lo myalelo ulandelayo: libcamera-still -t 0

Phawula:
Le modyuli yekhamera ixhasa iRaspberry Pi OS Bullseye yamva nje (ikhutshiweyo
nge-28 kaJan, 2022) kunye ne-libcamera apps, hayi kubasebenzisi bangaphambili beRaspberry Pi OS (Ilifa).

ULWAZI OLUNYE

Ngolwazi oluthe vetshe, jonga ikhonkco elilandelayo: https://www.arducam.com/amaxwebhu/ikhamera-yeraspberry-pi/iraspberry-pi-libcamera-guide/

QHAGAMSHELANA NATHI

I-imeyile: inkxaso@arducam.com
Iforamu: https://www.arducam.com/forums/
I-Skype: iarducam

Amaxwebhu / Izibonelelo

ArduCam 12MP IMX477 Mini HQ Imodyuli yeKhamera yeRaspberry Pi [pdf] Incwadi yoMnini B0262, 12MP IMX477 Mini HQ Imodyuli yeKhamera yeRaspberry Pi, 12MP Imodyuli yeKhamera yeRaspberry Pi, IMX477 Mini HQ Imodyuli yeKhamera yeRaspberry Pi, iModyuli encinci yeKhamera yeRaspberry Pi, iModyuli yeKhamera encinci yeRaspberry Pi, iModyuli yeKhamera yeHQ yeRaspberry Pi, Imodyuli yeKhamera yeRaspberry Pi, iModyuli yeKhamera, iModyuli yeRaspberry Pi yeKhamera, iModyuli

Iimbekiselo

• Incwadi yokusebenzisa