Eli phepha libonisa ukhuphelo files kunye nemiyalelo yokufakela ukuhlaziya i-Multisensor 6 yakho nge-software ye-OTA kwaye wenze inxalenye enkulu Multisensor 6 isikhokelo somsebenzisi.

Isikhokelo sethu ukuphucula i-Multisensor 6 firmware ngeHomeSeer inokufunyanwa ngokulandela ikhonkco elinikiweyo.

Njengenxalenye yethu IGen5 uluhlu lweemveliso, I-MultiSensor 6 i-firmware iyaphuculwa. Amanye amasango aya kuxhasa ukuphuculwa kwe-firmware emoyeni (OTA) kwaye ibe nokuphuculwa kwe-firmware ye-MultiSensor 6 epakishwe njengenxalenye yeqonga labo. Kwabo bangekaxhasi ukuphuculwa okunjalo, i-MultiSensor 6's firmware inokuphuculwa kusetyenziswa. Z-Intonga ukusuka kwi-Aeotec (okanye nayiphi na enye i-Z-Wave ehambelana ne-Z-Wave ye-USB Adapter evela kuye nawuphi na umenzi) kunye Microsoft Windows.

Isilumkiso-  Ukuhlaziya i-Multisensor 6 kwi-V1.14 ayiyi kukuvumela ukuba uhlehlise ngaphantsi kwe-firmware V1.09 emva kokuhlaziywa kwi-V1.13. Umlinganiselo ophezulu wokumisela iParameter 41 yi-1.0F okanye i-1.0C yeParameter 41 kwi-firmware V1.14.

IiMfuneko:

• Windows PC (XP nangaphezulu)
• I-Adapter ye-USB ye-Z-Wave (i-Z-Stick, i-UZB1, i-SmartStick+, okanye ezinye iiadaptha ze-USB eziqhelekileyo ze-Z-Wave zingasetyenziswa)

Utshintsho lweFirmware:

Amaxwebhu oHlaziyo-Aeotec MultiSensor 6 [PDF]

V1.15 Utshintsho:

• Lungisa iSensom yokukhanya enika ingxelo ngamaxabiso angaqhelekanga ngamaxesha athile

V1.14 Utshintsho:

• Isiseko seSiseko esisiSiseko esikhawulezayo sixhokonxa xa isindululo sichongiwe (xa iParameter 5 [1 byte] = 1)
• Xhasa inzwa yokukhanya entsha ye-hardware ye-Si1133
  • Ngasemva iyahambelana nesivamvo sokukhanya esidala i-Si1132 (esetyenziswa kwi-firmware V1.13 nangaphantsi)

Ukuphucula i-MultiSensor 6 yakho usebenzisa i-Z-Stick okanye nayiphi na enye iadaptha ye-USB ye-Z-Wave:

1. Ukuba i-MultiSensor 6 yakho sele iyinxalenye yenethiwekhi ye-Z-Wave, nceda uyisuse kuloo nethiwekhi. Incwadi yakho yeMultiSensor 6 ichukumisa oku kwaye isango lakho lesango le-Z-Wave / hub yencwadi yomsebenzisi liya kubonelela ngolwazi oluthe ngqo. (tsiba uye kwinyathelo lesi-3 ukuba sele liyinxalenye ye-Z-Stick)
2. Xhuma i-Z, i-Stick isilawuli kwizibuko le-USB lomphathi wakho wePC.
3. Khuphela i-firmware ehambelana nenguqulelo ye-MultiSensor 6 yakho.
   
   Isilumkiso: ukukhuphela kunye nokwenza i-firmware engalunganga iya kuzitena i-MultiSensor yakho kwaye iyenze yaphuke. Ukwenza izitena akuhlawulwanga ngewaranti.
   
   V1.15
   I-Australia / iNew Zealand frequency-inguqulelo ye-1.15Ixesha le-European Union yenguqulelo-inguqulelo 1.15

   I-United States inguqulelo rhoqo-inguqulelo 1.15

   Uguqulelo lwesiRashiya rhoqo-uguqulelo 1.15
   
   V1.10
   Inguqulelo yaseJapan frequency-uguqulelo 1.10
   
   

4. Unzip i-firmware ye-ZIP file utshintshe igama lika "MultiSensor_6_***.ex_ ”ukuya ku“MultiSensor_6_***.izembe”.
5. Vula i-EXE file ukulayisha ujongano lomsebenzisi.
6. Cofa CATEGORIES kwaye emva koko ukhethe UKUSETYENZISWA.

     7. Iwindow entsha iya kuvela. Cofa kwi-DETECT iqhosha ukuba i-USB port ayidweliswanga ngokuzenzekelayo.

      8. Khetha i-ControllerStatic COM port okanye i-UZB, emva koko ucofe u-OK.

      9. Cofa u-Yongeza i-NODE. Vumela isilawuli sibe kwimo yokubandakanya. Cinezela ngokufutshane iMultiSensor 6 “Iqhosha lesenzo”. Kule stage, i-MultiSensor 6 iya kongezwa kwinethiwekhi ye-Z-Stick ye-Z-Wave.

     10. Gqamisa i-Multisensor 6 (ibonisa njenge "Sensor Multilevel" okanye uyikhethe ngokusekelwe kwi-ID yeNode).

     11. Khetha UHLAZIYO lweFIRMWARE uze ucofe QALA. Uphuculo lwe-firmware ye-over-the-air ye-MultiSensor 6 yakho iya kuqala.

     12. Ukuba i-Multisensor 6 inamandla ebhetri, uhlaziyo lwe-firmware alunakuqalisa ngokukhawuleza. Cofa nje iqhosha kwi-Multisensor 6 emva koko uhlaziyo kufuneka luqale.

     13. Emva kwemizuzu emi-5 ukuya kweli-10, uhlaziyo lwe-firmware luya kugqitywa. Iwindow iya kuvela kunye nenqanaba "ngempumelelo" ukuqinisekisa ukugqitywa ngempumelelo.

     14. Ukuba ufumanisa nayiphi na imiba kwisixhobo sakho esingakwaziyo ukuseta ulungelelwaniso ngokufanelekileyo, nceda uqiniseke ukuba uqale udibanise i-Multisensor yakho kwinethiwekhi yakho ukuze ugweme i-phantom nodes, emva koko uqhube ukusetha kwakhona kwefektri ngokubamba iqhosha lesenzo se-Multisensor 6 imizuzwana ye-20.

     15. Ngoku phinda ubandakanye i-Multisensor 6 yakho kwinethiwekhi yakho.