LS GRL-D22C Programmable Logic Controller

Iinkcukacha

• Inombolo yomzekelo: C/N 10310000312
• Igama leMveliso: Isilawuli seNgcaciso eCwangcisiweyo i-Smart I/O Rnet
• Iimodeli ezihambelanayo: GRL-D22C, D24C, DT4C/C1, GRL-TR2C/C1,TR4C/C1, RY2C
• Ubukhulu: 100mm

Imiyalelo yokusetyenziswa kwemveliso

Ukuhlohla:

1. Qinisekisa ukuba umbane ucimile phambi kofakelo.
2. Nyusa i-PLC kwindawo efanelekileyo usebenzisa izixhobo ezifanelekileyo zokunyusela.
3. Qhagamshela izixhobo zegalelo kunye nemveliso kumazibuko amiselweyo.

Ukucwangcisa:

1. Sebenzisa isoftware enikiweyo ukucwangcisa isilawuli esisekwe kwiimfuno zakho.
2. Vavanya inkqubo ngocoselelo phambi kokuba uyisebenzisele ukusebenza.

Ugcino:

1. Qwalasela nakuphi na ukudityaniswa okuxekethileyo okanye iimpawu zokuguga.
2. Gcina isixhobo sicocekile kwaye singenalo uthuli.

Imibuzo ebuzwa qho

• Umbuzo: Ndiyimisela njani kwakhona i-PLC kwisetingi zasefektri?
  • A: Ukuseta ngokutsha iPLC kuseto lwasefektri, bhekisa kwincwadi yomsebenzisi ngemiyalelo ethile yokuqalisa inkqubo yokuseta ngokutsha.
• Umbuzo: Ngaba ndinokwandisa umthamo we-I/O we-PLC?
  • A: Ewe, unokwandisa umthamo we-I / O we-PLC ngokongeza iimodyuli zokwandisa ezihambelanayo. Jonga kumaxwebhu emveliso ngolwazi malunga nokhetho lolwandiso oluxhaswayo.

Ulwazi lweMveliso

Smart I/O Rnet GRL-D22C,D24C,DT4C/C1GRL-TR2C/C1,TR4C/C1,RY2C

Esi sikhokelo sofakelo sibonelela ngolwazi olulula lomsebenzi okanye ulawulo lwePLC. Nceda ufunde ngononophelo olu xwebhu lwedatha kunye neencwadana ngaphambi kokusebenzisa iimveliso. Ngokukodwa funda izilumkiso kwaye uphathe iimveliso ngokufanelekileyo.

ImiGaqo yoKhuseleko

ISILUMKISO sibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, inokubangela ukufa okanye ukwenzakala okumandundu.
UKULUMKISA kubonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukwenzakala okuncinci okanye okuphakathi. Isenokusetyenziswa ukulumkisa ngokuchasene nezenzo ezingakhuselekanga

ISILUMKISO

1. Musa ukuqhagamshelana neetheminali ngelixa umbane usetyenziswa.
2. Qinisekisa ukuba akukho miba yesinyithi yangaphandle.
3. Musa ukuyisebenzisa kakubi ibhetri(ukutshaja, qhaqha, ukubetha, mfutshane, ukusoda).

ISILUMKO

1. Qiniseka ukuba ujonga umthamo olinganisiweyotage kunye nolungiselelo lwetheminali phambi kocingo
2. Xa ufaka iintambo, qinisa isikrufu sebhloko yetheminali ngoluhlu oluchaziweyo lwetorque
3. Musa ukufaka izinto ezinokutsha kwindawo ezingqongileyo
4. Musa ukusebenzisa i-PLC kwindawo yokungcangcazela ngokuthe ngqo
5. Ngaphandle kwabasebenzi benkonzo ye-forexpert, musa ukudibanisa okanye ukulungisa okanye ukuguqula imveliso
6. Sebenzisa i-PLC kwimeko-bume ehlangabezana neenkcukacha ngokubanzi eziqulethwe kule datha.
7. Qinisekisa ukuba umthwalo wangaphandle awudluli umlinganiselo wemodyuli yokuphuma.
8. Xa ulahla i-PLC kunye nebhetri, yiphathe njengenkunkuma yamashishini.
9. Umqondiso we-I/O okanye umgca wonxibelelwano uya kutsalelwa intambo ubuncinci be-100mm kude ne-high-voltagIntambo ye-e okanye intambo yombane.

Indawo yokusebenza

Ukufakela, jonga le miqathango ingezantsi.

Hayi	Into	Inkcazo					Umgangatho
1	Ithuba elikwiNdawo.	0 ~ 55℃					–
2	Ubushushu bokugcina.	-25 ~ 70℃					–
3	Ukufuma kwendawo	I-5 ~ 95%RH, i-non-condensing					–
4	Ukugcinwa kokufuma	I-5 ~ 95%RH, i-non-condensing					–
5	Ukunyangwa kweVibration	Ukungcangcazela ngamaxesha athile				–	–
		Ukuphindaphinda	Ukukhawulezisa				IEC 61131-2
		5≤f<8.4㎐	–		3.5mm	Amaxesha ali-10 kwicala ngalinye ngenxa X AND Z
		8.4≤f≤150㎐	9.8㎨(1g)		–
		Ukungcangcazela okuqhubekayo
		Ukuphindaphinda	Ukuphindaphinda	Ukuphindaphinda
		5≤f<8.4㎐	–	1.75mm
		8.4≤f≤150㎐	4.9㎨(0.5g)	–

Izixhobo kunye neNgcaciso zeCable

• Jonga i-5pin isinxibelelanisi esincanyathiselwe kwimveliso.
• Xa usebenzisa unxibelelwano lwe-Rnet, intambo ejijekileyo iya kusetyenziswa ngokuthathela ingqalelo umgama wonxibelelwano kunye nesantya.

1. Umba: Ikhebhula yoNxibelelwano lweLAN ephantsi
2. Uhlobo: LIREV-AMESB
3. Ubungakanani : 1P X 22AWG(7/0.254)
4. Umenzi: Ikhebhula ye-LS umenzi wenkcazelo yemathiriyeli efanayo ngezantsi
5. Iimpawu zombane

Izinto	Iyunithi	Iimpawu	Imeko
Ukuchasa iKondi	Ω/km	59 okanye ngaphantsi	25℃
Ukumelana neVoltage (DC)	V/1min	500V, 1Min.	Emoyeni
I-Insulation Resistance	MΩ-km	1,000 okanye ngaphezulu	25℃
Umthamo	Pf/M	45 okanye ngaphantsi	1kHz
Impedance yophawu	Ω	120±12	10MHz

Ubungakanani (mm)

Le yinxalenye engaphambili yeModyuli. Jonga igama ngalinye xa usebenzisa inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Iinkcukacha Zokusebenza

• Le yimigaqo yokusebenza yeModyuli. Bhekisela kwigama ngalinye xa uqhuba inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Into	I-GRL-D2xC	I-GRL-DT4C/C1	GRL-TRxC/C1	I-GRL-RY2C
INgeniso ekalisiweyo yangoku	5mA		–	–
Umthamo olinganisiweyo womthamotage	–	DC24V		DC24V/AC220V, 2A/Point, 5A/COM
Umthwalo omkhulu	–	0.5A/Point, 3A/COM		I-DC 110V, i-AC 250V 1,200 amaxesha / iyure
ON Voltage	I-DC 19V okanye ngaphezulu			Umthamo omncinci womthamotage/yangoku DC 5V/1mA
OFF Voltage	I-DC 6V okanye ngaphantsi

UYilo lweBhlokhi yetheminali ye-I/O Wiring

Olu luyilo lwebhloko yendlela yesiphelo ye-I/O yocingo. Bhekisela kwigama ngalinye xa uqhuba inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi

Iintambo

Iingcingo zoNxibelelwano

1. XGT Rnet ↔ Smart I/O 5pin
2. Ngolwazi oluthe kratya malunga neengcingo, jonga kwincwadi yomsebenzisi.

Iwaranti

• Ixesha lewaranti ziinyanga ezingama-36 ukusuka kumhla wokwenziwa.
• Ukuxilongwa kokuqala kweempazamo kufuneka kuqhutywe ngumsebenzisi. Nangona kunjalo, ngesicelo, i-LS ELECTRIC okanye abameli bayo banokuwenza lo msebenzi ngentlawulo. Ukuba unobangela wesiphoso ufunyaniswa uxanduva lwe-LS ELECTRIC, le nkonzo iya kuba simahla.
• Ukukhutshwa kwiwaranti
  1. Ukutshintshwa kwezinto ezisetyenziswayo nezinobomi kuphela (umz. iireyiyidi, iifuse, iicapacitor, iibhetri, iiLCDs, njl.njl.)
  2. Ukusilela okanye umonakalo obangelwe ziimeko ezingafanelekanga okanye ukuphatha ngaphandle kwezo zichazwe kwincwadana yomsebenzisi
  3. Ukungaphumeleli okubangelwa yimiba yangaphandle engahambelani nemveliso
  4. Ukusilela okubangelwa luhlengahlengiso ngaphandle kwemvume ye-LS ELECTRIC
  5. Ukusetyenziswa kwemveliso ngeendlela ebezingalindelekanga
  6. Ukusilela okungenakuxelwa kwangaphambili/ukusonjululwa bubuchwephesha bezenzululwazi bangoku ngexesha lokwenziwa
  7. Ukusilela ngenxa yezinto zangaphandle ezifana nomlilo, umthamo ongaqhelekangatage, okanye iintlekele zendalo
  8. Ezinye iimeko apho i-LS ELECTRIC ayinaxanduva
• Ngolwazi oluneenkcukacha lwewaranti, nceda ujonge kwincwadana yomsebenzisi.
• Umxholo wesikhokelo sokufakela unokutshintsha ngaphandle kwesaziso sokuphucula ukusebenza kwemveliso.

I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000312 V4.5 (2024.6)

• I-imeyile: automation@ls-electric.com
• Ikomkhulu/Seoul Office Umnxeba: 82-2-2034-4033,4888,4703
• LS ELECTRIC Shanghai Office (China) Umnxeba: 86-21-5237-9977
• I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Umnxeba: 86-510-6851-6666
• I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Umnxeba: 84-93-631-4099
• I-LS ELECTRIC Middle East FZE (Dubai, UAE) Umnxeba: 971-4-886-5360
• I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Umnxeba: 31-20-654-1424
• I-LS ELECTRIC Japan Co., Ltd. (eTokyo, eJapan) Umnxeba: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, USA) Umnxeba: 1-800-891-2941
• Umzi-mveliso: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

Amaxwebhu / Izibonelelo

LS GRL-D22C Programmable Logic Controller [pdf] Isikhokelo soFakelo GRL-D22C Programmable Logic Controller, GRL-D22C, Programmable Logic Controller, Logic Controller, Controller

Iimbekiselo

• Incwadi yokusebenzisa