Xerox Phaser 6510 Installation Guide
Installation Guide
- Select a Location.
- Remove the packing material.
- Install the options.
- Load the paper tray.
- Select a printer connection
- Connect the power.
- Follow the prompts for panel language and device configuration.
To set up a Wi-Fi connection, at the control panel, press the Menu button. Scroll to Admin Menu, then press OK. Scroll to Network / Port, then press OK. Scroll to Wi-Fi Settings, then press OK. Scroll to Access Point Search, then select your network. To enter the passphrase using ASCII characters, press OK. Enter the passphrase using the up and down arrows, then press OK.
- Install the current print and scan drivers from the Xerox website.
Installation and setup videos are available on the Xerox website.
For detailed information, download the User Guide from the Xerox website
http://www.xerox.com/office/6510docs
http://www.xerox.com/office/6510support
Documents / Resources
 |
Xerox Phaser 6510 [pdf] Installation Guide Phaser 6510 |
I am new to Xerox printers.
I am trying to install my phaser 6510 DNI on a wireless network. Everything including the WIFI adapter is properly installed. However,
somehow I changed the menu language to Spanish and I don’t know how to change back to English.
I need help to restore my menu and panel language to English and then to get the wireless network set up.