Contents
hide
Fabriano Copy Bio Copier
“
Product Specifications:
- Dimensions: min 400 mm, max 800 mm
- Weight: 590 mm
- Height: 60 cm
- Width: 600 mm
- Depth: 590 mm
- Noise Level: 41/42 dB
- Installation Space: 585/435 mm
- Water Pressure: min 0.05 MPa/0.5 Bar, max 1 Mpa/10 Bar
- Minimum Clearance: 10 mm
- Power Cord Length: ~1300 mm
Product Usage Instructions:
Installation:
- Ensure the installation space meets the dimensions
specified. - Connect the water supply following the water pressure
requirements. - Plug in the power cord to a suitable power outlet.
Operation:
- Turn on the appliance using the designated power button.
- Select the desired settings using the control panel.
- Monitor the appliance during operation and adjust settings as
needed.
Maintenance:
- Regularly clean the appliance according to the manufacturer’s
instructions. - Check for any leaks or unusual noises and address them
promptly. - Refer to the user manual for troubleshooting tips and
maintenance schedule.
Frequently Asked Questions (FAQ):
Q: What should I do if the appliance makes excessive noise
during operation?
A: Check for any loose parts or obstructions and ensure the
appliance is placed on a level surface.
Q: How often should I clean the appliance?
A: It is recommended to clean the appliance at least once a
month or as per the manufacturer’s guidelines.
Q: Can this appliance be used with a water softener?
A: Yes, this appliance is compatible with most water softeners,
but refer to the user manual for specific instructions.
“`
850 850 min: 400 mm max: 800 mm
mm
590 60 cm
600
590 45 cm
450
41 / 42 dB
585/435 mm
a
SERVICE
C00540867
2x 3,5×16 mm
b
c
d
min: 0,05 MPa/0,5 Bar max: 1 Mpa/10 Bar
min. 10 mm
~1300 mm ~1500 mm ~1500 mm
a b
min: 25mm
1
2
3
1
b
SERVICE C00540867
c
3
4
b d
5
6
400011401545C
04/2021 as – Xerox Fabriano
2
Documents / Resources
 |
Xerox Fabriano Copy Bio Copier [pdf] Installation Guide 400011401545_W, 61C1FZ, Fabriano Copy Bio Copier, Fabriano, Copy Bio Copier, Bio Copier, Copier |