XDcuff 104 Reusable Securement Straps User Guide
XDcuff 104 Reusable Securement Straps

INSTALLATION OVERVIEW

The XDcuff® Cuff Securement Straps (CSS), were developed to function as part of a system that enables you to quickly limit a patient’s movement, on the stretcher, should the need exist.

Made from black nylon with DuraGrip® hook & loop fasteners, the CSS attach to the stretcher’s frame. Once in position, they secure the XDcuff® disposable or reusable restraints, ( Product REF 102, 103, 101) to the stretcher and store them for rapid access.

CUFF SECUREMENT STRAP (CSS)
Cuff securement Strap

Attaching the Cuff Securement Strap to Stretcher
At the four recommended locations (fig-3), wrap the end of the gray stretcher strap around the stretcher  frame (as indicated in diagram at left), feed it throught the plastic loop and back on to itself. Smooth the hoop & loop fastener to secure (fig1). When attaching the restraint to the CSS, pull the red release tab on the black cuff strap and open the hook & loop fastener. In the opening, place  a folded (or packaged) restraint and re-attach the cuff strap. Smooth the hook & loop to hold the restraint in place. Your XDcuff® restraint is now ready for use (fig-2).
Attaching the Cuff
Attaching the Cuff

LEFT ANKLE POSITION

The left ankle position is located on the foot-end hitch, at the patient’s left side toward the foot. Ensure that each red release tab is pointing towards the lift bars/handles for easy access in emergencies.

  1. Wrap the gray stretcher anchor around the foot-end hitch (fig-4).
  2. Feed the gray stretcher strap through the plastic loop (fig-5).
  3. Pull the gray stretcher strap tightly and fasten it back to itself (fig-6). Completed left ankle position with black cuff strap secured (fig-7).
    Left Ankle position

See User Guides packaged with the Restraints for detailed instructions on installing the XDcuff® system.

RIGHT ANKLE POSITION

The right ankle position is located on the opposite side of the foot-end-hitch. 1) Wrap the gray stretcher strap around the foot-end hitch (fig-8) 2) Feed the gray stretcher strap through the plastic loop (fig-9) 3) Pull the gray stretcher strap tightly, and fasten it back to itself (fig-10). Completed left and right ankle position with black cuff straps secured (fig-11).
Right Ankle position

LEFT WRIST POSITION

This position is located on the foot lift portion of the stretcher, near the patients left foot.
Left wrist position

RIGHT WRIST POSITION

This position is located on the head lift portion of the stretcher on the patients left side.
Right wrist position

Visit our YouTube channel (XDCuff®) for helpful instructional videos for installing the Cuff Securement Straps, Wrist and Ankle Restraints.

 

Documents / Resources

XDcuff 104 Reusable Securement Straps [pdf] User Guide
104 XDcuff Reusable Securement Straps, XDcuff, 104, Reusable Securement Straps, Securement Straps, Straps

References

Leave a comment

Your email address will not be published. Required fields are marked *