OS2010 A1 Cordless Robotic Pool Cleaner
“
Product Information
Specifications:
- Model: WYBOT A1(OS2010)
- Charging Time: Fully charge before first use
- Cleaning Cycles: 120min*1 (Default), 60min*2, 40min*3,
30min*4 - Charging Distance: Keep device at least 3m (9.8ft) away from
the pool
Product Usage Instructions
Step 1 – Assembling:
- Insert the included flipper into the cleaner with its notch
aligned with the groove on the right side cylinder. - Fully assembled.
Step 2 – Charging:
- Uncover the rubber cap of the charging port and ensure it is
dry. - Insert the charger cable into the charging port, keeping the
device at least 3m away from the pool. - Fully charge your device before first use.
Step 3 – Customize your cleaning cycle:
- Turn on the device and select a cleaning cycle by pressing the
power button. - Options include 120min*1 (Default), 60min*2, 40min*3, and
30min*4.
Step 4 – Submerging the device:
- Gently submerge the device into the pool.
- Wait for auto-calibration for 15 seconds.
- LED turns flashing blue and starts cleaning.
Step 5 – Removal from the pool:
- If using a cycle other than the default, leave the robot in the
pool to complete the whole cycle. - Hook the device out of the pool using the included hook on a
standard pool pole.
Step 6 – Cleaning the filter:
- Clean the filter after each use to maintain cleaning
effectiveness. - Store the cleaner in a ventilated place away from direct
sunlight or inclement weather. - Charge the device at least every 3 months to maintain battery
performance during off-season.
FAQ
Q: How often should I clean the filter?
A: It is recommended to clean the filter after each use to
ensure optimal cleaning performance.
Q: Can I leave the robot cleaner in the pool after it completes
a cleaning cycle?
A: If you have set a cycle other than the default, it is
advisable to leave the robot in the pool to complete the whole
cycle for thorough cleaning.
“`
Quick Start Guide
Step 1 -Assembling
1
2
a
Step 2 -Charging
3
5
fully charged!
b
Insert the included flipper into the cleaner with its notch aligned with the groove on the right side cylinder.
Fully assembled.
Emailsupport@wybotpool.com
Facebook: @WybotPool
Website: www.wybotpool.com
Uncover the rubber cap of the charging port, and ensure it is dry.
Fully charge your device before first use.
4
3m (9.8ft)
Insert charger cable into the charging port, and keep your device at least 3m away from pool.
WYBOT A1(OS2010)
Step 3 -Customize your cleaning cycle (Ensure your robot is fully charged before choosing a cycle)
6
7
120min*1 (Default Cycle)
60min*2
40min*3
Turn on the device, and you will hear a beep. In the meatime, the LED lights turn solid blue.
30min*4
Press the power button to choose a suitable cleaning cycle. For more information on cleaning cycle, please refer to the user manual.
Quick Start Guide
Step 4 -Submerging the device
9
10
Step 5 -Removal from the pool
11
12
13
WYBOT A1(OS2010)
Step 6 -Cleaning the filter
14
15
a
b
Submerge the device into the pool gently.
Wait for the device auto-calibration for 15 seconds.
LED turns flashing blue and start to clean.
Emailsupport@wybotpool.com
Facebook: @WybotPool
Website: www.wybotpool.com
Auto park by the wall when completing cleaning.
If you have set a cycle other than the defaut, you should leave the robot in the pool to complete whole cycle.
Insert the included hook into a standard pool pole.
Hook it out of the pool.
c
d
You should clean the filter after use.Insufficient cleaning may influence pool cleaning effect.
Store the cleaner in a ventilated place and keep it out of direct sunlight or inclement weather.
Charge the device at least every 3 months to maintain battery performance during the offseason.
Document No. G2024201001
Documents / Resources
 |
WYBOT OS2010 A1 Cordless Robotic Pool Cleaner [pdf] User Guide OS2010 A1 Cordless Robotic Pool Cleaner, OS2010 A1, Cordless Robotic Pool Cleaner, Robotic Pool Cleaner, Pool Cleaner |