Wunderlich 41601-000 Without a Case Carrier
Product Specifications
- Product Name: Werkzeugbox
- Article Number: 41601-000
- Quantity: 1
- Material: Metal
- Dimensions: 100mm x 60mm x 70mm
- Weight: 500g
Product Usage Instructions
- Ensure all components are included in the package.
- Attach the screw (Schraube) using the screwdriver (Screw Vis).
- Apply thread-locking fluid (Schraubensicherung) to the screw threads.
- Adjust the torque to 3.0 Nm using the torque wrench (Drehmoment).
- Secure the components in place as per DIN and ISO standards.
Maintenance Instructions
- For optimal performance, check the seal adjustment after 1-2 days of locking the box.
- Remove the shim for increased tension on the striker plate.
FAQ
- Q: How do I adjust the seal on the Werkzeugbox?
- A: After locking the box, wait for 1-2 days for the seal to adjust optimally. Removing the shim will increase tension on the striker plate.
- Q: What is the recommended torque for assembly?
- A: The recommended torque for assembly is 3.0 Nm.
Description
Key
Fitting tip
Attention
Magnification
Fitting lubricant
Screw
Thread locking fluid- Torque
Installation Instructions
- With the box locked, the seal will have adjusted itself optimally after 1-2 days.
- The shim is used for fine adjustment, removing it increases the tension of the striker plate.
- The colors are for illustrating purposes only.
Documents / Resources
 |
Wunderlich 41601-000 Without a Case Carrier [pdf] Instruction Manual 41601-000 Without a Case Carrier, 41601-000, Without a Case Carrier, Case Carrier, Carrier |