Woodpeckers Clamp-N Guide Router Adapter
Product Specifications
- Product: Woodpeckers Clamp-N-Guide
- Model: CLAMPNGUIDE
- Manufacturer: Woodpeckers, LLC
- Location: Strongsville, Ohio
Product Usage Instructions
Using Your Clamp-N-Guide
- Look at the Slide Lock 2 on the underside of the Clamp-N-Guide 1. If you hold the clamping pad in place and push the wider dog-bone shaped piece toward the clamping pad, it collapses, engaging the clutches on the knurled center rod. Figures A1 & 2
- Pull the dog-bone away from the clamping pad to release the clutches, allowing the Slide Lock to adjust easily in either direction.
- To clamp the Clamp-N-Guide on a piece of stock:
- Open the Compression Handle completely.
- Place the Compression Handle end of the clamp on your material.
- Slide the Slide Lock up to the material, ensuring the clutches engage. Figure B
- Close the Compression Handle completely. There is a halfway stop of the Compression Handle, allowing fine adjustments to the Clamp-N-Guide’s position before locking it completely.
Frequently Asked Questions (FAQ)
- Where can I find the most current version of the instruction manual for the Woodpeckers Clamp-N-Guide?
The latest instruction manuals are available for download at woodpeck.com. You can find them in the bottom section of the tool’s page under the Additional Information or Instructions tabs. - How can I stay updated on new products, OneTIME Tools, and sales from Woodpeckers?
You can subscribe to the Woodpeckers eClub located at the top center of the webpage on woodpeck.com. Additionally, you can follow Woodpeckers on Facebook, Instagram, TikTok, and subscribe to their YouTube channel for tool tips and tricks. - Is there any safety information I should be aware of regarding this product?
Yes, this product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
OVERVIEW
- (1) Clamp-N-Guide
- (1) Compression Handle
- (1) Slide Lock
USING YOUR CLAMP-N-GUIDE
- Look at the Slide Lock 2 on the underside of the Clamp-N-Guide 1 If you hold the clamping pad in place and push the wider “dog-bone” shaped piece toward the clamping pad you’ll notice it collapses. This engages the clutches on the knurled center rod. Figures A1 & 2
- Pulling the “dog-bone” away from the clamping pad releases the clutches and allows the Slide Lock to adjust easily in either direction.
- To clamp the Clamp-N-Guide on a piece of stock, open the Compression Handle completely and place the Compression Handle end of the clamp on your material. Slide the Slide Lock up to the material and make sure the clutches engage. Figure B
- Close the Compression Handle completely. You’ll notice there is a “half-way” stop of the Compression Handle. This partially locked position allows you to make fine adjustments to the position of the Clamp-N-Guide before closing the Compression Handle completely.
ABOUT COMPANY
- At Woodpeckers we are constantly reviewing & improving our tools.
- The most current version of our instruction manuals are always available to download at woodpeck.com. (Located in the bottom section of the tool’s page under the “Additional Information” or “Instructions” tabs.)
- Be the first to know all the new products, OneTIME Tools & sales by subscribing to our eClub. (Located at the top center of our webpaqe woodpeck.com.)
- Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
- INTERACT WITH US! Follow us on Facebook, Instagram & TikTok!
- Enjoy shop tips, project ideas, tool techniques & more in our Woodworking
- Resource Center/Blog. (Located at the bottom center of our webpage woodpeck.com.)
Documents / Resources
 |
Woodpeckers Clamp-N Guide Router Adapter [pdf] Owner's Manual Clamp-N Guide Router Adapter, Clamp-N, Guide Router Adapter, Router Adapter, Adapter |
