wiz 9290025512X Wi-Fi Remote Control User Manual
Wiz MOTE EASY SETUP Z FOLD
Size: 180 w x 120 h mm (open) / 60 w x 120 h (finished)
Paper: Acumen Paper- Salona Offset 90gsm
Page: 6pp
Color: 4C + 4C
Finish: Score and fold
DIECUT
SCORE LINE
6-PAGE Z FOLD
SETUP YOUR Wiz MOTE
Before starting the setup process, make sure at least 1 Wiz light in the room is turned on and connected to Wi-Fi.
- SELECT ROOM IN THE APP
Press + on the top right corner to link the Wiz mote to the room. - COMPLETE SETUP
Follow the on-screen steps in the app. - ENJOY USING THE Wiz MOTE
Quick and easy control of your lights.
Notes:
- The Wiz mote is attached to a single room and only controls the lights in that room. You can link the remote to another room in the app.
- You can change the 4 favorites of the room in the app.
Need help?
Get in touch through our in-app chat support.
CONTROL YOUR LIGHTS FASTER WITH THE Wiz MOTE
A – Turn lights ON
B – Turn lights OFF
C – Night light
D – Favorite 1
E – Favorite 2
F – Favorite 3
G – Favorite 4
H – Brightness adjustment
SETUP WITHOUT APP
You can link your Wiz mote to a light (or set of lights) without the app. Make sure the light is not already paired in the app.
- WHAT TO DO WITH YOUR Wiz LIGHT
Turn off the light you want the Wiz mote to control. Then turn it back on again. - WHAT TO DO WITH YOUR Wiz MOTE
Press the “ON” button 3 times in the first 10 seconds the light is turned back on. - ENJOY USING THE Wiz MOTE
Quick and easy control of your lights.
Notes:
1. Link as many lights as you want to one Wiz mote. They will respond together as long as they are within range of the Wiz mote.
2. If you pair your Wiz light in the app, it will stop responding to the Wiz mote until you go through the steps in
SETUP WITH APP.
Need help?
Go to: faq.wizconnected.com
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information (SAR)
The 10-g extremity SAR Limit of FCC for general population exposure conditions is 4.0W/kg. The remote control has been tested against the SAR limit. And the highest reported SAR for handheld use is 0.31W/kg. It is compliant with FCC RF exposure requirements.
Documents / Resources
 |
wiz 9290025512X Wi-Fi Remote Control [pdf] User Manual 9290025512X Wi-Fi Remote Control, Wi-Fi Remote Control, Remote Control |
