Wise TECH x5 Multimedia Projector User Manual

Products
• This is a High-definition multimedia LCD projector. It can project
full color video image signal onto a big screen for presentation
or watching. It is particularly suited to dance halls, karaoke OK,
home theater and business presentations.
• The projector can use the remote control to realize full-function remote
control operation, also can use the buttons on the body. The whole
machine adopts microcomputer intelligent control, self control switch
machine self-checking, resistant to turn it off by mistake, lighting
protection, thermal protection, fan detection monitoring circuit, AD hoc
brightness automatic gain control, clear image sharpness adjustment,
optical trapezoidal correction, manual, remote control receiving circuit,
greatly improve the stability and reliability of the machine.
• External five basic image signal source:
VGA Port|
HDMI Input
A composite video signal source image
USB Input
TF card port
Connected to DVD, VCD, VCR, cameras, game consoles,
digital cameras, and electricity
• This series projector can be installed/rear projection/Ceiling, the
projection images support 16:9 and 4:3 two kinds of display mode,
to meet your different interests.
• This series projector has high photosynthetic efficiency optical engine
system, including dozens of reflective material layer of professional
precision optical viewfinder, many more groups of professional
projector lens, optical system of the precision of short focal width and
long screen.
Manual Operation
Video Play
• Press button in the menu interface
to select which library you want.
Movie, picture, music or words.
8 Press ‘ok ‘to confirm and enter the
file list.

Select the file you want to play
8 Use’
file
folder.
• To choose
Use
to open a file folder.
Play the file
4 UseComputer settings
• First switch the input signal mode to
the computer.
Read ‘Basic operations of menu’,
switch signal source to computer
input(PC setting). See the picture
on the right side
• Press
button shows the
Settings of the interface on right bottom.
@ Press A Y
to choose which option,
press
to adjust,
press Menu to confirm setting and quit.
PICTURE
Picture Mode Vedium
Color Tesperature Mediun
Aspect Ratio 16:9
Noise Reduction Middle
PC Setting
Reduce Display 100%
PC Setting
Auto Adjust
Horizontal Pos. 50
Vertical Pos. 50
Size 50
Phase 7
Automatic adjustment: the different VGA device
(desktop, laptop, desktop shadow spy machine,
© OK
portable shadow spy, VOD VOD machine, each
kind of hardware player, etc.) signal input, the
system will automatically check or adjust the display mode, the
corresponding measurement to match the right display mode to realize
the right of screen display
Location: when the projection image in a horizontal offset, you can adjust
the horizontal position of the picture.
Location: when the projection image in the vertical direction of migration,
you can adjust the vertical position of the picture.
Zoom adjustment: Zoom in or Zoom out Projection size.
Phase adjustment: Automatic detection
User Defined
signal source of phase and clock.
Corresponding value will display on it.
Line Location
For different VGA devices, when the
Zoom
display is abnormal, adjust this option
Row location
so the pictures can be displayed in correct
Phase Position
Parameter
0-100
0-100|
0-100|
0-100
status. See the picture on the right side.
Multimedia mode
• Check U disk, TF card connection.
• Refer to “input signal source selection’ section to the input signal
switch to USB or SD card input mode, and select the files in the
directory you need to play.

Warming: To avoid risk of fire or electricshock, do not put the
projector underrainor at humid places.
Device is with High Voltage.
Please do not open it if you
areunprofessional to it.
! Warming
This sign means that there is
relevant instruction of
important operation or
maintenance(repair).
This sign means that there is
dangerous voltage on the
outer-cover which can make
people get electric shock.

Warming: This is A a-class products, in the living environment,

the product may cause radio interference. In this case,
and may require the user to take practical measures to
the interference.
Warming: To turn the projector into standby mode when the
device is in normal working, please use the power
button on the projector or the remote controller.

M
Before unplugging the AC power cord, be sure the
cooling fan is stop. Do not unplug the the power
cord when the projectoris working. otherwise, itwill cause
machinemalfunction.
Considerations about the remote control battery
If the polarity of the batteries installed upside down (the positive
and negative reversed), then the battery will become overheated
and damage. To warn children don’t remove the battery or load,
loading the battery in to the remote control by adult.
move t
the file and press
” to play
Play operation
• Press
“to show the play
station on the right.
@ Press “4
• ” to chose the
fuction
© Press
” to operate the
tuction.
Press
” E” to back off the
operation by remote.
FB/FF: to 2x, 4x, 8x, 16x the speed
of the video.
Last: Playing on a selected program,
Next: Playing on next selected
program.
Stop: Stop the video play.
Play/Pause: Play or pause
the videoManual Operation
Color temperature
Color Ten.. User
Red 50
Green
• Pressthe “4” “Y” button, select a color
temperature, and then press
display
on the right side of the interface
@ Press the “4”
“” button, choose the
items you need to adjust, and then press
“4”I
“>
button to adjust the values of the
parameters of the options.
50
50
Customer
define
red
blue
green
Parameter
0-100
0-100
0-100
Standard → Warm Color → User →
Cool colour
Noise cancelling
To reduce the roughness of the image
• Press the “A” “y” button, select the
noise reduction, and then press “O
display on the right side of the interface.
@ Press the “A” “y” button, select the
level of noise reduction, and then press
“MENU”
button to exit.
Noise Reduction
Off
LoT
Middle
High
Default
TENU
If the image is rough, please according to the source from “low”
“Middle”
“high”
“default”
select settings.
The image projection mode
image scaling
Reference the basic operations of a
“menu section switch to the on the
right side of the menu interface, and
select a zoom mode. Image zooming
Pieture Mode Medius
Color Tenperature Nedius
Aspect Satio Auto
Noise Reduction Widdle
PICTURE
I Settins
Installation of Projector
Warming:
When the projector is working, don’t face up to the
projector lens, in order to avoid light damage your
eyes.
Focus adjustment

Clockwise lens, lens all back into the machine, then slowly to
counterclockwise, carefully observe the pixels on the screen at the
same time, in the clearest image particle hou (image center area shall
prevail), which is the lens focused best location.
4 Keystone
Behind a slowly moving on the trapezoidal correction gear (figure 3).
make the border around the screen image is quadrilateral, trapezoidal
correction the biggest adjustment range is # 15 degrees. If the trapez-
oidal correction gear when transferred to the limit position still cannot
eliminate the keystone distortion, please shorten the distance form the
centre of the projector and screen in the vertical direction (figure 4). If
you use the mesa place way to install the projector, changing the
projector by regulating wheel rotating plate angle projection angle
(figure 5).
Trapezoidal correction gear
Screen
Projector
vertical
dimension.
—–
If unable to completely eliminate
the keystone distortion, to reduce
the vertical distance.
Whhhhhhhhhhhhhhhhhhhh
FIGURE 4
FIGURE 3
If unable to completely eliminate
the keystone distortion, to reduce
the vertical distance.
Screen
Vertical dimension
Projector
Angle adju-*
stment wheel
FIGURE 5

Documents / Resources

Wise TECH x5 Multimedia Projector [pdf] User Manual
x5 Multimedia Projector, Multimedia Projector, Projector

References

User Manual

Wise TECH x5 Multimedia Projector

Specifications

Installation

Operation

Documents / Resources

References

Leave a comment

Cancel reply