Wi-Tek AX4800 6GHz Fixed Access Point Installation Guide

Enter the default password “admin” to access the Management
UI.
Configure wireless settings by selecting Access Point Mode,
creating an SSID, choosing Encryption Mode, and setting a PSK Key
for security.

Verify the settings and click Finish to complete the
configuration.

4. Application

The device can be used as an Access Point for creating a
wireless network for clients to connect to.

5. Warranty Information

If any product defects occur within the warranty period,
professional maintenance service will be provided. Ensure to keep
proof of purchase and product serial number for warranty
claims.

Frequently Asked Questions (FAQ)

Q: How do I reset the device to factory settings?

A: To reset the device, locate the Reset Button on the device
and press and hold it for at least 10 seconds until the LED
indicators show the reset process is complete.

Q: Can I change the default IP address of the device?

A: Yes, you can change the default IP address by accessing the
Web Management interface and modifying the LAN settings
accordingly.

View Fullscreen

1.Packing Content

Quick Installation Guide
6GHz AX4800 Fixed Access Point

PWR SYS ETH1 ETH2 WiFi
Radio x 1

Quick Installation Guide

PWR SYS ETH1 ETH2 WiFi

www.wireless-tek.com

Quick Installation Guide x 1

Metal Strap x 2

WI-FW5600 www.wireless-tek.com

48V 2.5GE PoE Adapter x 1

Power Cord x 1

2. Appearance Overview
For WI-FW5600 · Front Panel

LED Indicator

· Side Panel

POE/ETH1 ETH2

RST

DC IN 12V-48V

Reset Button 1Gbps R2J45 E1thernet Port

2.5Gbps RJ45 Ethernet Port with 802.3af/at PoE Input

· LED Indicator

Item PWR SYS Wi-Fi ETH1 ETH2

Status
On Off On Off On Off On Blinking On Blinking

Description
The device is powered on The device is powered off The system is working normally The system is not working The Wireless function is enabled The Wireless function is disabled The port is connected Data being transferred The port is connected Data being transferred

3. Device Installation
· 1. Mount the radio to a pole with provided Metal Strap.
· 2.Connect the device to antenna with 4 RF cables.

· 3.Press the buckle and moving with the direction as the arrow shown.

· PTMP

4. Application
Client WI-FW5625

· 4.Using a cable connecting to the ETH port. Slide the cover back to the radio, with the cable passing through the hole.

Access Point WI-FW5600

Client WI-FW5620-H
Client WI-FW5619

5.Web Management
· A) Boot Up Device (1) Power on the device. (2) Connect the PC to the PoE adapter using Ethernet cable

POE/ETH1 ETH2

RST

PoE Adapter PC

Ethernet Cable
(3) Open a browser such as Chrome or Firefox and launch the login page with default IP 192.168.1.2, then type the password admin to enter the Management Ul.

Password Language English
Log in

· B) Configure the Access Point (1) Please finish LAN Settings, and then click Next.

Setup Wizard

Lan

192.168.1.2

Netmask 255.255.255.0

Gateway 192.168.1.1

DNS

8.8.8.8

Home page

(2) Wireless Settings: Choose Access Point Mode and create a new SSID (Network name) for your wireless network. And then select Encryption Mode and create a PSK Key to protect the device.

WIFI Mode
SSID

Setup Wizard
Access Point Wireless-bridge

Encrypt Mode WPA3-SAE

Key

12345678

Channel System Password

45(6175 Mhz) admin

Use Wi-Fi password as router management password

Back

(3) Verify your settings and click Finish to complete the configuration.

Neteork
IP Netmask Gateway DNS
WIFI
Mode SSID Encrypt Mode Key Channel
System
Password

192.168.1.2 255.255.255.0 192.168.1.1 8.8.8.8

Access Point wireless-bridge WPA3-SAE 12345678 45

admin
Back

Finish

· C) Configure the Client
(1) Make sure the clients are powered on and repeat step A) (2) and (3). (2) Please finish LAN Settings and make sure the subnet is the same as the Access Point, and then click Next.

Setup Wizard

Lan

192.168.1.3

Netmask 255.255.255.0

Gateway 192.168.1.1

DNS

8.8.8.8

Home page

(3) Wireless Settings: Choose Client Mode and enter the same SSID and PSK Key and select the same Encryption Mode as Access Point.

WIFI Mode
SSID

Setup Wizard
Client wireless-bridge

Encrypt Mode WPA3-SAE

Key

12345678

Channel System Password

45(6175 Mhz) admin

Use Wi-Fi password as router management password

Back

(4) Verify your settings and click Finish to complete the configuration.

Neteork
IP Netmask Gateway DNS
WIFI
Mode SSID Encrypt Mode Key Channel
System
Password

192.168.1.3 255.255.255.0 192.168.1.1 8.8.8.8

Client wireless-bridge WPA3-SAE 12345678 45

admin
Back

Finish

Warranty Card
Username Address Telephone No. Purchase Shop Purchase Address Product Model No. Purchase Time Serial No. Dealer Signature
If the product defects within the warranty period, we will provide professional maintenance service. Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty. Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damaged, warranty card loss will disqualify the product from limited warranty.

Technical Support

Company Website

Cloud Management

Wireless-Tek Technology Limited Address: Building 3, Units 1801-1807, 1812, Huaqiang Era Plaza, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen City, Guangdong Province, China. Website: www.wireless-tek.com Tel: 86-0755-32811290 Email: sales@wireless-tek.com Technical Support: tech@wireless-tek.com

Documents / Resources

Wi-Tek AX4800 6GHz Fixed Access Point [pdf] Installation Guide
AX4800, AX4800 6GHz Fixed Access Point, 6GHz Fixed Access Point, Access Point, Point

References

User Manual

Wi-Tek AX4800 6GHz Fixed Access Point Installation Guide

AX4800 6GHz Fixed Access Point

Specifications

Product Usage Instructions

1. Device Installation

2. Appearance Overview

3. Web Management