MP2300Siec PLC No Response
Specifications
- Product: YASKAWA MP2300Siec (Ethernet)
- Website: Yaskawa Website
- PLC Type: Ethernet
- PLC I/F Port no.: 44818
- Assembly Instance:
- Input: 101
- Output: 111
- Multicast: Disable
- Electronic key: Use
YASKAWA MP2300Siec (Ethernet)
Website: http://www.yaskawa.com/site/home.nsf/home/home.html
HMI Setting:
PLC Setting:
MP2300Siec-Motion Works IEC Express (YASKAWA) Settings:
Step 1. Before HMI communicates with MP2300Siec using Ethernet/IP, the Instance Input and Instance Output of MP2300Siec device must be set correctly. Multiple Instances are allowed to be built at one time, please click [Save] after setting.
Step 2.Global Variables will automatically add in E/IP Input and Output data, Input and Output data name and address type can be user-defined.
Step 3. When download Project to device (MP2300Siec), please go to (Fig. 3) Resource->Settings to access setting dialog (Fig. 4) for setting MP2300Siec IP address.
Step 4. Start compilation
Step 5. Download project to device- MP2300Siec, and execute Cold
You may use one of the two drivers to connect Yaskawa MP2300Siec:
- Yaskawa MP2300Siec driver.
- Rockwell EtherNet/IP (CompactLogix) – Free Tag Names driver.
Yaskawa MP2300Siec driver.
- Step 1. System Parameter Settings
- Open EasyBuilder project, as shown in Fig. 7, Assembly Instance and Size must match the software default factory settings, and please don’t select UDP. Fig.8 below shows how
- HMI Input / Output address is mapped to MP2300Siec device.
Step 2. Address Setting: Instance 101 and Instance 111 are defined as 128Bytes, on the project window , WORD objects can be used, with data typed defined as 32-Bit Unsigned, Input addresses set to 0、 2、4、6…..62 for reading Instance 101 data
Rockwell EtherNet/IP (CompactLogix) – Free Tag Names driver. Step 1. In EasyBuilder8000/EasyBuilder Pro project, when using Rockwell EIP driver to import CSV file (as in Fig. 10), please open Structure Editor (Fig. 11), and right click on Module Defined to add New Data Type.
Step 2. As in Fig 12, in Structure Editor add Name of the new data type. The Name must be set identically to the Data Type in Free Tag CSV file. As in Fig 14, Data Member Name must be set identically to the Rockwell software (as Data in Fig. 13), then click [Save] (Fig. 15).
Step 3. Import CSV file, Tag Information can be viewed from object address.
Device Address
Wiring Diagram
FAQS
after setting each Instance. ” image-0=”” headline-1=”p” question-1=”Q: What is the recommended option for the Electronic key?” answer-1=”A: It is recommended to use the Electronic key. Make sure to set it accordingly in the settings. ” image-1=”” count=”2″ html=”true” css_class=””]Documents / Resources
 |
WEINTEK MP2300Siec PLC No Response [pdf] User Guide MP2300Siec-Motion Works IEC Express, MP2300Siec PLC No Response, MP2300Siec, PLC No Response, No Response, Response |