WARING CB15T Ultra Heavy Duty Blender
Product Information
The product is an ultra-heavy-duty blender designed for commercial use. It is available in different models including CB15T, CB15TS, and CB15 with Hot Blending Lid. The blender featuresa slow start blending mechanism and a timer that can be adjusted from 10 seconds to 3 minutes. It comes with a 3-year limited motor warranty and is NSF certified. The blender also includes an electronic membrane keypad for easy operation.
Product Usage Instructions
- Before using the blender, ensure that it is properly assembled and all parts are securely attached.
- Connect the blender to a power source using the provided power cord.
- To turn on the blender, press the POWER ON/OFF button.
- To start blending, select the desired blending speed using the LLOOW, MED, or HIGH buttons.
- If pulsing is required, press the PULSE button.
- To stop blending, press the STOP button.
- For hot blending, attach the optional Hot Blending Lid (CBL10) to the blender.
- Ensure that the blending container is securely placed on the base unit before operating the blender.
- To adjust the blending time, use the timer adjustment buttons on the electronic membrane keypad.
- After each blending cycle, allow the blender to rest for 1 minute before starting another cycle.
Note: For detailed instructions on assembling and disassembling specific parts of the blender, refer to the user manual provided with the product.
Unit Information
- 15.0 Amps. – 3.75 HP
- 3 Year Limited Motor Warranty
- Electronic Membrane Keypad
- Slow Start™ Blending Mechanism
- Timer Adjustable from 10 seconds to 3 minutes
- Operating Cycle is 3 Min. ON and 1 Min. OFF
PART LIST
| Illustration# | Part# | Description | |
| 1 | 024000 | Hot Blending Outer Polycarbonate Lid | |
| 2 | 026496 | Gasket | |
| 3 | 023998 | Hot Blending Lid Baffle Cup | |
| 4 | 002972 | Cap Nut | |
| 5 | 027581 | Washer | |
| 6 | 027683 | Blade | |
| 7 | 018389 | “O” Ring | |
| 8 | 027582 | Bearing Cap | |
| 9 | 018390 | Small “V” Ring | |
| 10 | 023934 | Bearing Holder | |
| 11 | 004946 | Washer | |
| 12 | 018386 | Bearing | |
| 13 | 023926 | Spacer | |
| 14 | 023907 | Spring Washer | |
| 15 | 023927 | Retaining Ring | |
| 16 | 023906 | Large “V” Ring | |
| 17 | 023933 | Drive Shaft | |
| 18 | 025817 | Key (changed after 6/18/2004) | |
| 19 | 028530 | Cover Insert (changed after 10/9/2006) | |
| 20 | 028226 | Vinyl Outer Lid (changed after 10/9/2006) | |
| 21 | 013470 | Stopper (on units before 10/9/2006) | |
| 22 | 013469 | Stainless Steel Outer Lid | |
| 023999 | Plastic Outer Lid (obsolete) | ||
| 23 | 017442 | Stainless Steel Lid Gasket | |
| 026496 | Plastic Lid Gasket (units before 10/9/2006) | ||
| 24 | 008791 | Latch Wire (3 required) | |
| 25 | 502773 | Bracket Assembly (spot welded to container | 3 required) |
| 26 | 023909 | Double Handle Container | |
| 27 | 502977 | Blending Assembly (complete) | |
| 28 | 004949 | Container Base Gasket | |
| 29 | 025571 | Container Support (changed after 8/12/2002) | |
| 30 | 012008 | Lock Nut | |
| 31 | 503328 | Coupling with Magnet Ring (on units after 9/16/2013) | |
| 502696 | Coupling | ||
| Illustration# | Part# | Description |
| 32 | 025871 | Jar Pad |
| 33 | 028025 | Top Housing (changed after 10/26/2010) |
| 34 | 030895 | Control Panel (on units after 9/16/2013) |
| 028052 | Control Module Panel | |
| 35 | 029888 | Rear Control Panel (on units after 9/16/2013) |
| 36 | 026497 | Screw (4 required) |
| 37 | 030453 | Control Panel Baffle (on units after 9/16/2013) |
| 38 | 002984 | Washer (4 required on units after 8/25/2016) |
| 003344 | Washer (4 required on units after 3/28/2016) | |
| 002984 | Washer (4 required on units after 3/12/2003)
(8 required for use with 015434) |
|
| 39 | 016691 | Hex Bolt (4 required on units after 8/25/2016) |
| 019098 | Screw (4 required on units after 3/28/2016) | |
| 016691 | Screw (4 required on units after 3/12/2003) | |
| 015434 | Screw (4 required holds mounting plate to motor) | |
| (4 required holds motor to top housing) | ||
| 40 | 035520 | Leili Motor (on units after 11/1/2017) |
| 029875 | ECM Motor with MTP (on units after 8/25/2016) | |
| 503472 | Grosohopp Motor Modified (on units after 3/28/2016 use 036445) | |
| 029875 | ECM Motor with MTP (on units after 9/26/2013) | |
| 503323 | Motor with Sensor (on units after 8/27/2013) | |
| 026170 | ECM Motor (on units after 3/5/2003) | |
| 018788 | Motor (no longer available) | |
| 41 | 026318 | Baffle (on units after 8/25/2016) |
| 035355 | Baffle (on units after 3/28/2016) | |
| 026318 | Baffle | |
| 42 | 026500 | Screw (6 required) |
| 43 | 018791 | Screen |
| 44 | 013731 | Cable Tie (1 required on units after 9/16/2013) – (5 required) |
| 45 | 503329 | Cord Set (on units after 9/16/2013) |
| 502855 | Cord Set (on units after 3/5/2003) | |
| 501956 | Cord Set | |
| 46 | 018811 | Strain Relief |
| 47 | 002943 | Ground Washer (on units after 8/18/2009) |
| 014798 | Washer | |
| 48 | 027278 | Ground Screw (on units after 8/18/2009) |
| 016317 | Screw | |
| 49 | 026317 | Bottom Housing |
| 50 | 002984 | Washer (4 required) |
| 51 | 026412 | Screw (4 required) |
| Illustration# | Part# | Description |
| 52 | 026296 | Foot (4 required) |
| 53 | 018314 | Washer (4 required) |
| 54 | 026493 | Screw (4 required) |
ACCESSORIES
ABOUT COMPANY
- 314 Ella T. Grasso Ave.
- Torrington, CT 06790
- Tele. 1-800-269-6640
- Fax 860-496-9017
- www.waringcommercialproducts.com
Documents / Resources
 |
WARING CB15T Ultra Heavy Duty Blender [pdf] Instruction Manual CB15T Ultra Heavy Duty Blender, CB15T, Ultra Heavy Duty Blender, Heavy Duty Blender, Duty Blender, Blender |
