W15A1184B Fireplace Insert
“
Product Specifications
- Model: W15A1184B
- Material: Wood, Metal, Glass
- Dimensions: Varies based on assembly
- Weight: Varies based on assembly
Product Usage Instructions
Assembly Instructions
Before beginning the assembly of the product, please read the
manual carefully and keep it for future reference.
What’s in the Box
- Fireplace Insert x1 (individually wrapped)
- Cam bolt A x28, Cam lock B x36, Wooden dowel C x28, Cam bolt D
x4 - Left support rod E x1, Right support rod F x1
Tools Required (Not included)
Stud Finder, Pencil, Level, Drill, Screwdriver, Hammer
Installation Steps – Wood Stud Wall Mounting
- Find and mark the exact location of mounting holes on
406mm(16″) or 610mm(24″) wood studs. - Drill pilot holes using a 4mm (5/32) drill bit.
- Securely attach the product to the wall using the provided
screws.
Installation Steps – Solid Brick and Concrete Mounting
- Mark the exact location of mounting holes on solid brick or
concrete surfaces. - Drill pilot holes using an 11mm (7/16) drill bit.
- Securely attach the product to the wall using the appropriate
anchors and screws.
Tips for Installation
Please disassemble any wall hanging accessories before mounting
the product to ensure proper usage.
Additional Installation Steps
- Some steps require two persons for safe and efficient
assembly. - Adjust height, front-back, left-right as needed for proper
installation.
Final Assembly Options
- Option A (Floating TV Stand): Follow specific
instructions for floating TV stand assembly. - Option B (Fireplace): Instructions for
attaching fireplace to TV stand and handling front glass.
Adjustments and Finalization
Make necessary adjustments to ensure the product is level and
stable before finalizing the installation.
Frequently Asked Questions (FAQ)
Q: Do I need any special tools for assembly?
A: Basic tools like a screwdriver, drill, and level are
required. Refer to the manual for a complete list of tools
needed.
Q: Can I mount this product on drywall?
A: The product is designed to be mounted on wood studs, but with
proper anchors, it can also be mounted on drywall. Ensure the wall
can support the weight of the product.
Q: How do I adjust the height of the product after
installation?
A: Refer to the manual for instructions on adjusting the height,
front-back position, and left-right alignment of the product for
customization.
“`
Assembly Instructions
MODEL W15A1184B
IMPORTANT:please read this manual carefully before beginning assembly of this product.keep this manual for future reference.
1-1
WHAT’S IN THE BOX
2 10
8 7
5
3
1
10
9
12
7 11
11 6
4
14 13
15
Fireplace Insert (individually wrap)
1
Cam bolt
A x 28
Cam lock
B x 36
Wooden dowel
C x 28
Cam bolt
D x4
Left support rod
E x1
Screw
F x 32
WHAT’S IN THE BOX
Crash pad Right support rod
G x4
H x1
Screw
I x8
Wire cap
J x2
Hinge
K x4
Screw
L x 12
Horizontal bubble Hexagon socket key
M x1
N x1
Shelf support pin
O x4
L-iron
P x4
Cover
Q x 18
S1
S2
Cabinet hanger
S3
S4
S5
Anchor and screw
S x4
2
Tools Required (Not included)
INSTALLATION STEPS
1
1a. Wood Stud Wall Mounting
Fit for 406mm(16″) , 610 mm( 24 “)stud
Tools Required (Not included)
Stud Finder
Pencil
Level
F
4mm 5/32″
Drill Wood Drill Screw driver
1
2
Find and mark the exact location of mounting holes
3
10
Drill pilot holes
10
3
2
1a. Wood Stud Wall Mounting
Fit for 406mm(16”) , 610 mm( 24 “)stud
50mm (2″)
4mm 5/32″
4
S5 x 4
Screw S5 on the wall
25mm (1″)
INSTALLATION STEPS
WARNING
· Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
· Installers are responsible to provide hardware for other types of mounting situations. · Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
4
3
1b . Solid Brick and Concrete Mounting
Tools Required
(Not included)
Pencil
Drill
F Level
11mm 7/16″
Wood Drill
Hammer Screw driver
1
INSTALLATION STEPS
10
Mark the exact location of
of mounting holes
2
10
Drill pilot holes
50mm (2″)
11mm 7/16″
5
INSTALLATION STEPS
4
1b . Solid Brick and Concrete Mounting
S4 x 4
S5 x 4
50mm (2″)
3
11mm 7/16″
4
Secure wall anchors Screw S5 on SS4 into drilled holes the wall with hammer
25mm (1”)
WARNING
· Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
6
INSTALLATION STEPS
5
S
S4
S5
S1
S2
S3
7
Tips:
Please disassemble the wall hanging accessories before hanging the product on the wall. To make sure you can use this product properly!!
6
· Insert dowels (C) into panels (1,4).
D
· Insert cam locks (B) to panels (1), · then insert parts (D) into panels (1).
90°
· Rotate the cam locks (B) 90 ° to secure the parts (D).
1
INSTALLATION STEPS
B C
D
8
4
B x4
C x8
D x4
7
2 Person Task
1
2
3
INSTALLATION STEPS
B 3
1 2
·Attach panels (2,3) to panel (1) correctly. · Insert and secure cam locks (B) to panels (2,3) to lock them, · then secure parts (B) on the other side of parts (D).
9
B x4
INSTALLATION STEPS
8
3 5
4
·Screw bolts (A) into panels (1,2,3,4,5,6).
10
A
1 2
6
A x 24
INSTALLATION STEPS
9
B
7
9C
3 1
· Insert dowels (C) into panels (7,8,9). · Attach panels (7,8,9) to panels (1,2,3) correctly. · Insert and secure cam locks (B) to panels (7,8,9) to lock it.
11
1
2
3
8 7
2
B x 12
C x 10
INSTALLATION STEPS
10
1
2
3
L2
L1 L1
L1L2
10 2
L2
10
1
B
3
· Attach panels (10) to panels (1,2,3) correctly. · Insert and secure cam locks (B) to panels (10) to lock it.
12
B x6
INSTALLATION STEPS
11
5 4
J
· Insert dowels (C) into panels (5,6). · Attach panels (5,6) to panel (4) correctly. · Attach part (J) to panel (4).
13
6 J x1
INSTALLATION STEPS
12
1
2
3
2 Person Task
7
B
7 5
10
4
5
4
10
8
10
6
9 10
C
7
· Insert dowels (C) into panels (7,8,9). Insert and secure cam locks (B) to panels (10) to lock it. · Attach panels (4,5,6) to panels (7,8,9) with screws (L).
14
B x6
L
6 7
L x 12 C x 10
13
F
K
INSTALLATION STEPS
11
· Attach parts (K) to panel (11) with screws (F) correctly.
15
x 2
K x4
F x8
14
J
INSTALLATION STEPS
5 11
G
1
6 11
· Attach parts(11) to panels (5,6) with screws (F) correctly. · Insert parts (G) into panels (11). · Attach part (J) to panel (1).
G x4
16
J x1
F x 16
15
E
H
Left support rod Right support rod
INSTALLATION STEPS
8
11
H
I
I
E
E
Step 1
Step 2
· Attach parts (E,H) to panels (8,9,11) with screws (I) correctly.
17
9 11
E x1
H x1
I x8
16
Wall
S5
2 Person Task
1
INSTALLATION STEPS
· With help from another person, Hang the cabinet onto the screws (S5) carefully.
18
17
2 Person Task
INSTALLATION STEPS
S2
S2
LEFT
S5
RIGHT
S5
19
· Secure parts (S2) onto the screws (S5) , then screws and tighten screws (S5).
· Part (S2) must be installed correctly to ensure safe use .
S2 x 4
S3 x 4
18
INSTALLATION STEPS
S1
S3
· Secure parts (S1) onto the parts (S3).
S1 x 4
20
INSTALLATION STEPS
19
Adjust Height / Adjust front and back /
Adjust Left and right
21
20
INSTALLATION STEPS
Option A (Floating TV stand)
22
21
Option A (Floating TV stand)
INSTALLATION STEPS
O 8
9 12
· Attach panel (12) to panels (8,9) using parts (O).
23
O x4
1
22
Q x 18
2
· Stick stickers (Q) on cam locks (B)
and the holes.
Option A (Floating TV stand) Final Assembly
INSTALLATION STEPS
24
23
INSTALLATION STEPS
Option B (Fireplace)
25
INSTALLATION STEPS
24
Option B (Fireplace)
R
15
Before attaching fireplace to TV stand, unscrew four silver screws on the both sides of fireplace.
26
25
Option B (Fireplace)
INSTALLATION STEPS
Carefully remove the front glass, and place it on a soft and clean surface.
27
INSTALLATION STEPS
26
Option B (Fireplace)
8 9
A
· Screw cam bolts (A) into panels (8,9).
28
A x4
1
2
3
27
B
Option B (Fireplace)
INSTALLATION STEPS
8
9 14
F 13
13 P
14
· Attach parts (P) to panels (13,14) with screws (F) correctly. · Attach panels (13,14) to panels (8,9). · Insert and secure cam locks (B) to panels (13,14) to lock it.
29
B x4 F x4 P x4
INSTALLATION STEPS
28
Option B (Fireplace)
P F
1 4 F
P
· Attach parts (P) to panels (1,4) with screws (F) correctly.
30
F x4
29
2 Person Task
Option B (Fireplace)
INSTALLATION STEPS
15
· Insert fireplace (15) from front of the unit correctly.
31
30
Option B (Fireplace)
INSTALLATION STEPS
15 13
14 R
· Attach fireplace (15) to panels (13,14) with screws (R) correctly.
32
R x4
31
Option B (Fireplace)
INSTALLATION STEPS
· Attach the glass front to the fireplace.
33
1
32
Q x 18
2
· Stick stickers (Q) on cam locks (B)
and the holes.
Option B (Fireplace) Final Assembly
INSTALLATION STEPS
34
Documents / Resources
 |
Wampat W15A1184B Fireplace Insert [pdf] Instruction Manual W15A1184B, W15A1184B Fireplace Insert, W15A1184B, Fireplace Insert, Insert |