WALLYS DR8072 V01 Dual Concurrent Embedded board
Product Information
| Product Name | DR8072 V01 |
|---|---|
| Features |
|
| Applications |
|
| Product Description | DR8072 V01 based on IPQ8072A chipset is an enterprise wireless module integrated with 2×2(4×4) 5G high power Radio module and 4×4 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. |
| Absolute Maximum Rating |
|
Product Usage Instructions
To use the DR8072 V01 product, please follow these instructions:
- Ensure that the product is placed within the specified operating temperature range of -20°C to +70°C.
- Connect the product to a power source using the provided DC Jack Input Interface.
- Make sure the LED indicators are powered on.
- Connect your device(s) to the product using the available Ethernet ports (4 x 1 Gbps Ethernet Port, 1 x 10Gbps Ethernet Port) or the USB 3.0 Port.
- If required, connect external devices to the MiniPCIe Slot or the 10Gbps SFP.
- If necessary, perform a wireless reset using the designated Reset Button.
- Monitor the product’s performance using the Serial Port 4 Pin Connector or the JTAG 20 Pin Connector.
For further information and support, please visit http://www.wallystech.com/.
Features
- Qualcomm Atheros IPQ8072A AR Quad Core CPU
- On-board 5GHz radio, up to 2475Mbps physical data rate 8 MB NOR Flash, 256MB NAND Flash
- On-board 2.4GHz radio, up to 1147Mbps physical data rate
- Support 11ax TX Beamforming
- Support 11ac/ax MU-MIMO DL and UL
- Support OFDMA DL and UL
- support with 4×4/5GHz + 4×4/2.4GHz
- Supports Dynamic Frequency Selection (DFS)
Applications
- Dual Band MU-MIMO 802.11g/n/ac/ax
- Access Point Wireless application
- 4x4MU-MIMO 802.11ax Access Point
Product Description
DR8072 V01 based on IPQ8072A chipset is an enterprise wireless module integrated with 2×2(4×4) 5G high power Radio module and 4×4 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment.
Absolute Maximum Rating
| Parameter | Rating | Unit |
| Operating Temperature Range | -20 to +70 | ºC |
| Storage Temperature Range | -40 to +90 | ºC |
| Operating Humidity Range | 5 to +95 (non-condensing) | % |
| Storage Humidity Range | 0 to +90 (non-condensing) | % |
Hardware Specifications
| Symbol | Parameter |
| CPU | Qualcomm Atheros Quad Core ARM Cortex 64 – bit A53 Processor IPQ8072A 2.2GHz CPU |
| CPU Frequency | Derived from Qualcomm Atheros AP . HK0 1 |
| System Memory | 1x 512MB, DDR4 2400MHz 16- bit interface(RAM can be up to 2GB as
optional) |
| Frequency Range | 2.412~2 .472GHz,
5. 150~5 .825GHz |
| MiniPCIe Slot | 1x MiniPCIe Slot with PCIe 3.0 |
| Modulation Techniques | OFDMA: BPSK, QPSK, 16- QAM, 64- QAM, 256- QAM, 1024 -QAM |
| Environmental Temperature | Operating: -20 º C to 70 º C,
Storage: -40 º C to 90 ºC |
| Flash | NOR Flash: 8 MB
NAND Flash: 256MB |
| Wireless | On- board 4×4 2 .4GHz MU-MIMO OFDMA 802 . 11b/g/n/ax , max 1 7 dBm per chain
On-board 4×4 5GHz MU-MIMO OFDMA 802 . 1 1a/n/ac/ax, max 1 7 dBm per chain 8 x U . FL Connectors |
| Reset Buttons | 1 x S/ W Reset Button |
| DC Jack Input | 1x DC Jack Connector: 12V |
|
Interface |
4 x 1 Gbps Ethernet Port, 1x 10 Gbps Ethernet Port 1x 10Gbps SFP
2x USB 3.0 Port
1x JTAG 20 Pin Connector
1 x Serial Port 4 Pin Connector |
| LED | 2 x RGB LED Indicators |
| Power Consumption | TBD |
Documents / Resources
 |
WALLYS DR8072 V01 Dual Concurrent Embedded board [pdf] User Manual DR8072 V01 Dual Concurrent Embedded board, DR8072 V01, Dual Concurrent Embedded board, Concurrent Embedded board, Embedded board |