WAGO 221-415 Way Splicing Connector with Lever Lock
Product Information
Specifications
- Color: Transparent
- Dimensions: Width – 30mm, Height – 8.4mm, Depth – 18.6mm
- Material: Polycarbonate (PC)
- Insulation Material: Polycarbonate (PC)
- Flammability Class: V2 per UL94
- Rated Voltage: 600V
- Rated Current: 20A
- Weight: 4g
Product Usage Instructions
Safety Information
Make sure to observe installation and safety instructions provided with the product. This product should only be used with grounded power lines.
Connection Data
- Connection Technology: Clamping Units
- Actuation Type: Push Wire
- Connectable Conductor Materials: Solid Conductor, Stranded
Conductor, Fine-Stranded Conductor - Nominal Cross-Section: Information on material specifications can be found here
- Strip Length: 30mm / 1.181 inches
- Wiring Direction: Not specified
Environmental Requirements
- Ambient Temperature (Operation): Not specified
- Continuous Operating Temperature: Not specified
- Temperature Marking per EN 60998: Not specified
FAQ
- Q: What is the weight of the product?
A: The weight of the product is 4g. - Q: What are the dimensions of the product?
A: The dimensions of the product are as follows – Width: 30mm, Height: 8.4mm, Depth: 18.6mm. - Q: What are the approved certifications for this product?
A: The approved certifications include CCA DEKRA Certification B.V., cULus_Listed_667F Underwriters Laboratories Inc., ENEC 05 DEKRA Certification B.V., and UL_Listed_64KA UL International Germany GmbH.
Color: transparent
Dimensions in mm
Your benefits:
- Ease of use – pull the lever up, insert a conductor and push the lever back down
- Available as 2-, 3- and 5-wire connectors
- Easily terminate conductors from 0.14 to 4 mm²
- Connect solid, stranded and fine-stranded conductors
- Save time for installers and device manufacturers
- Quickly install devices with higher power consumption
- Safely install long cable runs with larger conductor cross sections
- Mounting carrier for installation conforms to standards
- Custom carriers are possible
Notes
Safety management note
NOTICE: Observe installation and safety instructions!
- Only to be used by electricians!
- Do not work under voltage/load!
- Use only for proper use!
- Observe national regulations/standards/guidelines!
- Observe technical specifications for the products!
- Observe the number of permissible potentials!
- Do not use damaged/dirty components!
- Observe conductor types, cross-sections and strip lengths!
- Insert conductor until it hits the product‘s backstop!
- Use original accessories!
To be sold only with installation instructions!
in grounded power lines
Safety Information
Electrical data | ||||||||
Ratings per | EN 60664 | Approvals per | UL 486C | |||||
Overvoltage category | III | III | II | Use group | B | C | D |
Pollution degree | 3 | 2 | 2 | Rated voltage | – 600 V | – | |
Nominal voltage | – | – | 450 V | Rated current | – 20 A | – | |
Rated surge voltage | – | – | 4 kV | ||||
Rated current | – | – | 32 A |
Connection data
- Clamping units 5
- Total number of potentials 1
Connection 1
- Connection technology CAGE CLAMP®
- Actuation type Lever
- Connectable conductor materials Copper
- Nominal cross-section 4 mm² / 12 AWG
- Solid conductor 0.2 … 4 mm² / 24 … 12 AWG
- Stranded conductor 0.2 … 4 mm² / 24 … 12 AWG
- Fine-stranded conductor 0.14 … 4 mm² / 24 … 12 AWG
- Strip length 11 mm / 0.43 inches
- Wiring direction Side-entry wiring
Physical data
- Width 30 mm / 1.181 inches
- Height 8.4 mm / 0.331 inches
- Depth 18.6 mm / 0.732 inches
Material data
- Note (material data)
- Information on material specifications can be found here
- Color transparent
- Material group IIIa
- Insulation material (main housing) Polycarbonate (PC)
- Flammability class per UL94 V2
- Fire load 0.089 MJ
- Actuator color orange
- Weight 4 g
Environmental requirements
- Ambient temperature (operation) +85 °C
- Continuous operating temperature 105 °C
- Temperature marking per EN 60998 T85
Commercial data
- Product Group 7 (Push Wire Conn.)
- eCl@ss 10.0 27-14-11-04
- eCl@ss 9.0 27-14-11-04
- ETIM 9.0 EC000446
- ETIM 8.0 EC000446
- PU (SPU) 250 (25) pcs
- Packaging type Box
- Country of origin DE
- GTIN 4055143234658
- Customs tariff number 85369010000
Environmental Product Compliance
RoHS Compliance Status Compliant,No Exemption
Approvals / Certificates | ||
General approvals | Declarations of conformity and manufacturer’s declarations |
Approval | Standard | Certificate Name |
CCA DEKRA Certification B.V. | EN 60998 | NTR NL-7990 |
cULus_Listed_667 Inc. | UL 486C | E69654 |
ENEC 05 DEKRA Certification B.V. | EN 60669,EN 60998 | 71-127529 |
UL_Listed_64KA
UL International Germany GmbH |
UL 467 | E201573 |
Approvals for marine applications
Approval | Standard | Certificate Name |
ABS
American Bureau of Ship ping |
– | 18-HG1755093-PDA |
DNV GL
Det Norske Veritas, Ger manischer Lloyd |
EN 60998 | TAE000015T |
LR
Lloyds Register |
EN 60998 | LR22207029TA |
Approval | Standard | Certificate Name |
EU-Declaration of Conformity WAGO GmbH & Co. KG | – | – |
UK-Declaration of Conformity WAGO GmbH & Co. KG | – | – |
Downloads
- Environmental Product Compliance
- Compliance Search
- Environmental Product
- Compliance 221-415
Documentation | ||||
Bid Text | ||||
221-415 | 19.02.2019 | xml 3.43 KB | ![]() |
|
221-415 | 23.01.2019 | docx 15.31 KB | ![]() |
|
ausschreiben.de 221-415 |
Compatible Products
Optional Accessories
General accessories
Empty housings
- Item No.: 207-4301
- Junction box; Branch; for multicore cables;
- 221 Series; max. 4 mm² connectors; without
- splicing connectors; white
Moisture protection
Item No.: 207-1332
Gelbox; Branch; for cables; with gel; 221, 2×73 Series; max. 4 mm² connectors; without splicing connectors; Size 2; gray
Jumper
Jumper
![]() |
![]() Jumper; for conductor entry; 2-way; insulated; blue |
![]() |
![]() |
Mounting adapter
Mounting accessories
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Item No.: 221-525
Mounting carrier; for 5-conductor terminal blocks; 221 Series – 4 mm²; with snap-in mounting foot for vertical mounting; white
Installation Notes
Conductor termination
- Strip conductor to 11 mm (0.43 inch).
- Pull up an orange lever to open the clamping unit.
- Then insert the conductor and push the lever back down, flush with the connector housing.
Compact, lever-operated splicing connectors:
- Tool-free connection of fine-stranded conductors from 0.14 … 4 mm², as well as solid or stranded conductors from 0.2 … 4 mm² (24 … 12 AWG).
Safety:
The lever’s specially designed rest position reliably prevents accidental unclamping of a connected conductor. Application safety, for any type of conductor (solid, stranded, fine-stranded), is confirmed by approvals like ENEC or UL.
Application
- Wiring fine-stranded conductors in junction boxes.
- Custom low-voltage lighting system
- Custom low-voltage lighting system
- Pendant light connection in a suspended ceiling
Subject to changes. Please also observe the further product documentation!
Current addresses can be found at: www.wago.com
Version 28.09.2024
Documents / Resources
![]() |
WAGO 221-415 Way Splicing Connector with Lever Lock [pdf] Instructions 221-415, 221-415 Way Splicing Connector with Lever Lock, 221-415, Way Splicing Connector with Lever Lock, Splicing Connector with Lever Lock, Connector with Lever Lock, with Lever Lock, Lever Lock, Lock |