W hner BA-T037 NH Fuse Switch Disconnector Size
INSTUCTION MANUAL
MODEL: BA-T037
DISPOSAL
NH-fuse-switch-disconnector size 1, 3 1-pole design, busbar mounting
Warning
- Hazardous voltage!
- Can cause electrical shock and burns.
- Disconnect power before proceeding with any work on this equipment.
Advice
The product described in this operating manual may be installed only by electrotechnically qualified personnel.
“Laymen” must not install or operate because they cannot foresee the possible consequences of their actions.
ASSEMBLY BA-T037 | 14850d
Disassembling
- Assembling (1), Insert of fuse-link (2), Switch-on (3)
- Busbar mounting
Attention!
Only apply fuse-links with silverplated contacts or silver-plated solid-links.
Busbar mounting
Switch-off (1), Removal of fuse-link (2), parking position (3)
- Accessory (A): Micro-switch for indication of switch-position
- Accessory (B): Micro-switch for mechanical fuse-monitorung
Voltage test BA-T037 | 14850d
- Accessory (C): Locking device Sealing (1)
- Power theft protection
Connection
* Connection of aluminum conductors:
Mechanically remove the oxide coating at the conductor ends im-mediately before connection and treat with acid- and alkali-free grease.
Accessory
Dimensions
60439 zu beachten/In case of mounting of several units in low voltage switchgear-combinations, please consider rated diversity factors acc. to EN 60439.
Further technical data you will find at our website
Specifications:
- Model: BA-T037
- Type: NH-fuse-switch-disconnector
- Size: 1, 3
- Design: 1-pole
- Mounting: Busbar mounting
Product Usage Instructions:
Warnings and Advice:
Warning: Hazardous voltage! Can cause electrical shock and burns. Disconnect power before proceeding with any work on this equipment.
Advice: The product described may only be installed by electrotechnically qualified personnel. Laymen must not install or operate the product.
Assembly:
Montage: Insert of fuse-link (2), Switch-on (3)
Montage (1): Assembling (1)
Busbar Mounting:
Busbar Mounting: Connect the device using the provided instructions for busbar mounting.
Use of Fuse-Links:
Attention: Only apply fuse-links with silver-plated contacts or silver-plated solid-links.
Frequently Asked Questions (FAQ):
Q: Who can install this product?
A: Only electrotechnically qualified personnel should install this product. Laymen are advised against installation.
Q: What should I do before working on the equipment?
A: Disconnect power to prevent electrical shock or burns before starting any work on the equipment.
Q: What type of fuse-links should be used?
A: Use only fuse-links with silver-plated contacts or solid-links to ensure proper functioning.
Documents / Resources
 |
W hner BA-T037 NH Fuse Switch Disconnector Size [pdf] Instruction Manual KVL-B-SF-1 1p M10-M10, 72913, BA-T037, BA-T037 NH Fuse Switch Disconnector Size, BA-T037, NH Fuse Switch Disconnector Size, Switch Disconnector Size, Disconnector Size |
