VTX Pilotix R3000 High Performance Video Transmitter Instruction Manual

Button Instructions

POWER Button：
Three color light indicator, short press to switch power, green indicates 25mW, yellow indicates 1W, red indicates 2W, purple indicates 3W, long press for 2S to switch PIT mode, green flashing indicates PIT mode.

Band/CH Button：
8 blue lights indicate frequency points and frequency groups, short press to switch frequency points, CH1-CH8 cycle switching;
Press and hold for 2 seconds to enter the frequency group switching mode, and both blue lights will light up at the same time. Then press and hold for 5 seconds to switch frequency groups, and it will automatically save and exit. (Explanation of frequency group indicator lights: CH1-CH8:
When two blue lights are on at the same time, it indicates frequency group. When 12 lights are on, it indicates group A; when 23 lights are on, it indicates group B; when 34 lights are on, it indicates group E; when 45 lights are on, it indicates group F; when 56 lights are on, it indicates group R; when 67 lights are on, it indicates group L; and when 35 lights are on, it indicates group X.)

Power level： 

VTX table：

Wiring Definition：

GND , VIN , VIN ,GND, DATA(Tramp) , 5VOUT,GND , VIDEO,

Documents / Resources

VTX Pilotix R3000 High Performance Video Transmitter [pdf] Instruction Manual 4.9 5.8G 3W, R3000 High Performance Video Transmitter, R3000, High Performance Video Transmitter, Performance Video Transmitter, Video Transmitter, Transmitter

References

• User Manual