Voion - logoVoion G01 Smart Bird Feeder with Camera - coverSmart Al Recognition Bird Feeder
Product manual

WHAT’S IN THE BOX

Voion G01 Smart Bird Feeder with Camera - WHAT'S IN THE BOX 1

INSTALL BIRD FEEDER

The first installation effect.

Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 1

  1. Use the provided drill sticker to mark the position of holes on your wall.
    Use drill bit to drill 4 holes.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 2
  2. Install4 Anchors.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 3
  3. Install the screws to fix the bracket.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 4
  4. As shown in the picture, put the Bracket connector into the bottom of the bracket, use 3 long screws to install it with the bird feeder, then the bird feeder is fixed.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 5
  5. After opening the lid and adding the bird food, as shown in the picture, fastening the 2 Short screws can prevent it from being opened by squirrels.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 6
  6. If you feel that the birdhouse suspension does not allow sufficient sunlight, you can connect a separate solar panel, as shown in the picture you just need to plug the solar panel into the DC port under the birdhouse.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 7
  7. As shown in the picture: you can adjust the solar panel up and down by 90°, and also rotate it by 360°.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 8

INSTALL BIRD FEEDER
The second installation effect.

  1. Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 9Need to unscrew 4 sets of screws from the Bird feeder wall mount and put them aside.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 10
  2. Put plastic accessories on the back, Re-tighten the four sets of screws.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 11
  3. Use the provided drill sticker to mark the position of holes on your wall. Use drill bit to drill 4 holes.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 12
  4. Install 4 Anchors.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 13
  5. Install the screws to fix the bracket.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 14
  6. As shown in the picture, put the Bracket connector into the bottom of the bracket, use 3 long screws to install it with the bird feeder, then the bird feeder is fixed.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 15
  7. After opening the lid and adding the bird food, as shown in the picture, fastening the 2 container lid Short screws can prevent it from being opened by squirrels.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 16
  8. If you feel that the birdhouse suspension does not allow sufficient sunlight, you can connect a separate solar panel, as shown in the picture: you just need to plug the solar panel into the DC port under the birdhouse.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 17

  9. As shown in the picture: you can adjust the solar panel up and down by 90°, and also rotate it by 360°.
    Voion G01 Smart Bird Feeder with Camera - INSTALL BIRD FEEDER 18

Documents / Resources

Voion G01 Smart Bird Feeder with Camera [pdf] User Manual
G01 Smart Bird Feeder with Camera, G01, Smart Bird Feeder with Camera, Bird Feeder with Camera, Feeder with Camera, Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *