Product Information

Model: VPLU1

Picture:

• Bluetooth version: ATS 5.0
• Power supplier: DC5V
• Output power: 12W(6W * 2)
• Lithium battery: 3.7V 2000mAh
• Speaker Unit: 45mm
• Case Material: TPU+metal
• Dimensions: 20×6.6×7.7cm
• Weight: 600g
• Play time: 10 hours
• Charging time: 3-4 hours

Product Usage Instructions

To use the VPLU1 Bluetooth speaker, follow these steps:

1. Charge the device fully before first use. This takes approximately 3-4 hours.
2. Turn on the speaker by pressing and holding the power button until the LED light turns on.
3. To connect your Bluetooth device, press and hold the Bluetooth button until the LED light flashes. Search for available devices on your Bluetooth-enabled device and select “VPLU1” to connect.
4. You can also connect your device using the AUX input or NFC function.
5. The VPLU1 also features a built-in microphone for hands-free calling.
6. The speaker can also be used as a power bank to charge your other devices.
7. For an even bigger sound, you can pair two VPLU1 speakers together using the TWS function.
8. The LED light button can be used to turn the light on and off.
9. You can also play music directly from a USB device using the play function.
10. The VPLU1 is waterproof with an IP66 rating, making it suitable for use in wet or damp environments.