VIKYLIN NVR Network Video Recorder IP Camera System
Specifications
- Product Name: NVR (Network Video Recorder)
- Storage: Hard Disk Drive (HDD) compatible
- Recording Modes: Continuous Recording
- Color Coding: Timeline color coding available
Record Configuration:
- Open the NVR back cover and connect the hard disk to the motherboard.
- Install the hard disk in the back of the NVR.
- Log in to the NVR web interface and navigate to the storage page.
- Select the drive where you connected the hard disk and proceed to format it.
- Set the recording format:
- If you want continuous recording, select the “Continuous” option. At 3, color the timeline green.
- Color code the timeline by selecting green for easy identification.
Frequently Asked Questions
Q: Can I use any brand of hard disk with the NVR?
A: It is recommended to use compatible hard disk drives to ensure optimal performance and compatibility with the NVR system.
Q: How do I access the NVR web interface?
A: You can access the NVR web interface by entering the NVR’s IP address in a web browser on a device connected to the same network as the NVR.
Documents / Resources
 |
VIKYLIN NVR Network Video Recorder IP Camera System [pdf] User Guide NVR Network Video Recorder IP Camera System, Video Recorder IP Camera System, Recorder IP Camera System, IP Camera System, Camera System |