Vigor AP910C Ceiling Mounting Process Instruction Manual

Vigor AP910C Ceiling Mounting Process

Specifications

• Color temperature settings: C = 5000K
• Color temperature settings: P = 4000K
• Color temperature settings: W = 2800K
• IP rating note: IP40 lamps cannot be used outdoors
• Dimming: Not dimmable
• Light source: Not replaceable (replace entire luminaire at end of life or if connection compartment is damaged)

Quick Guide

1. Disconnect power before starting installation work (remove fuse or switch off at the grid to OFF).
2. Ensure the wiring is correctly matched: N = Blue (Neutral), L = Brown/Black (Phase/Hot).
3. Use a fixation system designed to support the actual weight of the lamp.
4. Route wiring and connections away from heat sources and make sure wiring is not damaged during drilling or fixing.
5. Verify installation location meets safety requirements (not on flammable surfaces; not on damp, freshly painted, or electrically conductive surfaces).
6. After installation, ensure the terminal compartment remains dry, and no moisture reaches live parts.

INSTALLATION INSTRUCTION

SAFETY INSTRUCTIONS

1. Electrical appliances must only beconnected by qualified persons
2. Important! Before starting installation work, disconnect the
   • Disconnect the main cable from the power supply –remove the fuse or turn the switch off from the power grid – remove the fuse or turn off the switch.
3. The lamps with an index of protection of 40 (IP40) cannot be used outdoors
4. Lamps marked with the symbol may not be installed on e flammable surfaces such as carpet.
5. Do not attach the lamp to damp surfaces, freshly painted, or otherwise electrically conductive.
6. Connect the wires of the lamp with the same color likethe werden wires of the wall or the ceiling.N =blue=neutral wire.L=brown 6 (black) = phase.
7. Use the fixation system according to the weight of the lamp.= Phase.
8. Keep the wires and connections away from heat sources.
9. Make sure that the wiring is not damaged during drilling/ Weight of the lamp fixing procedure.
10. This product is not dimmable.
11. Cleaning is limited to the outer surfaces. It is important to ensure that it is not damaged.
12. Keep the appliance and its cord out of the reach of children. Make sure that no masture gets into it.
13. The light source of this luminaire is not replaceable; the entire connection compartment is exposed, or parts that carry electricity are touched!
    • The luminaire must be replaced.

RETAIN THESE DOCUMENTS FOR FUTURE REFERENCE CAREFULLY

EXPLANATION OF PROTECTION CLASSES:

Protection class II: This lamp is double insulated and must not be connected to the earth Wire.

CUSTOMER SERVICE

• Please scan the QR code to access detailed instructions in your preferred language(s).
• Lionway Electronics Co., Limited 1506, 120 Minsheng Rd, Gongming St, Guangming Dist, Shenzhen, 518106, CN. (Ivl@lwl-led.com) www.perfect-ledlighting.com
• EC RIP Gräenberger Allee 277, 40237 Düsseldorf DE Info@apex-ce.com/ +49 21312066043
• UK REP О fice10132 Threadneedle Street, London, United Kingdom, EC2R8AY EVATOSTCONSULTINGLTD
• contact@evatost.com
• +44 2076494690

• If the luminaire’s light source has reached the end of its life or the connection compartment is damaged: the entire luminaire must be replaced.
• If you suspect unsafe moisture ingress or exposure to live parts: stop and ensure cleaning is limited to outer surfaces only, with no moisture entering the terminal compartment.
• If installation cannot proceed safely due to electrical connection uncertainty: have qualified persons perform the wiring; disconnect the main cable (fuse removal or grid switch OFF) before any work.