Viessmann LED Luminaire with Patent Socket User Manual
This product is not a toy. Not suitable for children under 14 years! Keep these instructions!
Important Information
Before using this product for the first time read this user guide completely and attentively.
Using the Product for its correct Purpose
This product is designed
- for mounting into a model layout
- for connection to from an authorized model railroad transformer or a digital model
railroad control system connected to on - for operation in a dry area
Using the product for any other purpose is not approved and is considered incorrect. The manufacturer cannot be held responsible for any damage resulting from the improper use of this product.
Mounting and Connection
For mounting and connection refer to fig. 1, 2, 3, 4.
Do not cut off the diode and the resistor!
Make sure that the power supply is switched off when you mount the device and connect the wire
The power sources must be protected to prevent the risk of burning wires.
Only use VDE/EN tested special model train transformers for the power supply!
viessmann
Modellspielwaren GmbH
Am Bahnhof 1
D – 35116 Hatzfeld
www.viessmann-modell.de
Documents / Resources
 |
Viessmann LED Luminaire with Patent Socket [pdf] User Manual LED Luminaire with Patent Socket, LED Luminaire, with Patent Socket, Socket |
