Universal Keyboard for PC Software Applications
User Guide
Emulation mode quick selection
At start-up, keep the keys pressed.
SET + 4 : Virtual Com Port Mode.
SET + 5 : HID Joystick Mode.
HID joystick mode: Windows installation
Plug in the keyboard.
Calibrate the joystick.
- Start -> JOY.CPL
- R -> JOY.CPL
Virtual COM Mode: Windows installation
Download the proper 32/64 bit driver installer at http://support.videotec.com/.
Execute the installer as Administrator User.
Plug in the keyboard.
Changez COM PORT number.
- Start -> Run devmgmt.CPL
- R -> devmgmt.CPL
Click on Ports (COM&LPT).
Right-click on USB CDC (DCZ)/Properties.
Virtual Com Port Protocol Quick Start
[ (ASCII 91): Start of transmission.Message.
] (ASCII 93): End of transmission.
Messages from DCZ to PC
| EVENT | MESSAGE | PARAMETERS |
| Keypress. | [K+val] | Val: Key lookup value. |
| Key release. | [K-val] |
| Joystick movement. | [J±p,±t,±z] | ±p, ±t, ±z: Pan, Tilt, Zoom position -7 .. +7. |
| Shuttle movement. | [S±aa] | • ±aa: Rotation angle 0°..70°. |
| Jog Dial movement. | [D+1] [D-1] | • (Counter) Clockwise rotation 1 step. |
Main messages from PC to keyboard
| MESSAGE | ANSWER | MEANING | PARAMETERS |
| [Status?] | [Ready] | Keyboard line test. | |
| [Led+rc] [Led-rc] [Led/rc] | [LedrcSet] | LED on/off/ blink. | rc: row 1..8, column 1..9. |
| [Buzzer+] [Buzzer-] [Buzzer/] | [BuzzerSet] | Buzzer on/off/ buzzer. |
Headquarters Italy VIDEO TECH s.r.l.
Via Friuli, 6 – I-36015 Schio (VI) – Italy
Tel. +39 0445 697411 – Fax +39 0445 697414
Email: info@videotec.com
www.videotec.com
Documents / Resources
 |
VIDEOTEC DCZ Universal Keyboard for PC Software Applications [pdf] User Guide DCZ, Universal Keyboard for PC Software Applications, DCZ Universal Keyboard for PC Software Applications |
 |
VIDEOTEC DCZ Universal Keyboard for PC Software Applications [pdf] Instruction Manual DCZ, Universal Keyboard for PC Software Applications, DCZ Universal Keyboard for PC Software Applications |
