VICTOPER P70 Flashlight User Manual

VICTOPER P70 Flashlight

Overview

The VICTOPER P70 is a USB-rechargeable flashlight with multiple lighting modes. Use full-press to turn the flashlight on/off and half-press (or quick off/on cycling) to switch modes. A digital display shows remaining battery level and charging status.

Specifications

• Model: P70
• Power type: USB rechargeable
• Charging input: 5V USB power source
• Battery level indicator: Digital display showing remaining battery level
• Lighting modes: Multiple modes (cycled via half-press / quick off-on)

Quick Setup & Use

1. Charging (USB): Open the rubber charging-port cover, connect the included USB charging cable, then connect to a 5V USB power source. Use the display to confirm charging status.
2. Prepare for first use: Recharge fully before first use.
3. Install rechargeable battery (if replacing): Unscrew the tail cap, insert the rechargeable battery with the positive (+) end toward the flashlight head, then tighten the tail cap firmly.
4. Power on/off: Full press to turn ON; full press again to turn OFF.
5. Switch modes: Half-press to cycle to the next mode, or quickly click OFF/ON to move to the next mode.

WHAT’S IN THE BOX

CHARGING & BATTERY

A. USB CHARGING

1. Open the rubber charging-port cover.
2. Connect the included USB charging cable.
3. Connect to a 5V USB power source.
4. The display indicates charging Status.
5. Recharge fully before first use.

MODE SWITCHING

Half-press, or quickly click OFF/ON, to move to the next mode.

POWER DISPLAY & LIGHTING

• Digital display shows remaining battery level.
• High-output beam for outdoor use, search, and emergency lighting.

B. RECHARGEABLE BATTERY

1. Unscrew the tail cap.
2. Insert the rechargeable battery positive (+) end toward the flashlight head.
3. Tighten the tail cap firmly.
4. Use only a compatible rechargeable battery.

TROUBLESHOOTING