DVI3P Digital 3 Phase Voltage
Indicator Instructions
RELEVA
DVI3P
INSTRUCTION
DIGITAL 3 PHASE VOLTAGE INDICATOR DVI3P
TECHNICAL PARAMETERS
| Voltage Display Range | AC 80V-500V |
| Frequency Range | AC 50~60Hz |
| Discrepancy Range | ± 2% |
| Rated Insulation Voltage | 660V |
| Sampling Rate | 1 time/s |
| Input Loop Power Consumption | ≤2VA |
| Operating temperature | – 20°C … 55°C |
| Storage Temperature | – 30°C … 70°C |
DISPOSAL OF ELECTRICAL WASTE
All electrical waste should be disposed of in compliance with current WEEE regulations.
CAUTION!
The products must be installed by qualified electricians. All and any electrical connections of the time relay shall comply with the appropriate safety standards.
DIMENSIONS (mm)
SIA PAWBOL Baltic
Reg. Nr: 40103888768
VAT: Nr LV40103888768
Katakana 9A, Riga, Latvia, LV1073
Phone: + 371 62006800
Email: info@vexen.euManufactured in PRC
WWW.VEXEN.EU
REV. 0/202301
Documents / Resources
 |
veXen electric DVI3P Digital 3 Phase Voltage Indicator [pdf] Instructions DVI3P, DVI3P Digital 3 Phase Voltage Indicator, Digital 3 Phase Voltage Indicator, 3 Phase Voltage Indicator, Voltage Indicator, Indicator |