VEVOR YJX-CTS Series Nesting Tables
Product Information
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear to interpret our user manual. The appearance of the product shall be subject to the\ product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product
WARNING:
Please read this manual carefully before using the product. Failure to do so may result in serious injury.
Please read and observe carefully all the assembly instructions before beginning assembly.
Unit should be assembled by two or more people.
Please do not let your child climb on the product.If you have kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come with the package.
ASSEMBLY PRECAUTIONS
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs or medication.
- The product capabilities apply to properly and completely assembled products only.
- Assemble on a flat, level, hard and smooth surface capable of safely supporting the Nesting Tables.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
USE PRECAUTIONS
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
- This product is not a toy Do not allow children to play with or near this item.
- Do not exceed weight capacities, before moving.
- Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Nesting Tables.
- Use as intended only.
- Inspect before every use; do not use if parts are loose or damaged.
TECHNICAL SPECIFICATIONS
| Model | YJX-CTS-001 | YJX-CTS-002 | YJX-CTS-004 |
| Product Dimensions
(LxWxH) |
φ600*460mm, 1pc φ400*360mm, 1pc | φ600*460mm, 1pc φ400*360mm, 1pc | Φ700*460mm, 1pc Φ500*360mm, 1pc |
| Net
Weight(kg) |
About 6.8 | About 6.8 | About 8.9 |
*Products such as specifications, appearance, and design are subject to modification without prior notice
PACKAGE CONTENTS
ASSEMBLY STEPS
- Manufacturer: Shanghaimuxinmuyeyouxiangongsi
- Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
- Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
YH CONSULTING LIMITED. C/O YH Consulting
Limited Office 147, Centurion House, London
Road, Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69,
60329 Frankfurt am Main.
Technical Support and E-Warranty Certificate www.vevor.com/support
FAQ
- Q: Can I use the Nesting Tables outdoors?
- A: It is recommended to use the tables indoors on a flat and stable surface to ensure safety and stability.
- Q: How many people are required for assembly?
- A: The unit should be assembled by two or more people according to the assembly instructions for safety reasons.
- Q: What do I do if some parts are missing from the package?
- A: In case of missing parts, please contact our technical support for assistance using the provided E-Warranty Certificate on www.vevor.com/support.
Documents / Resources
 |
VEVOR YJX-CTS Series Nesting Tables [pdf] Instruction Manual YJX-CTS-001, YJX-CTS-002, YJX-CTS-004, YJX-CTS Series Nesting Tables, YJX-CTS Series, Nesting Tables, Tables |