VEVOR SSXG005,SSXG002 Box Style Cat Trees User Manual

SSXG005,SSXG002 Box Style Cat Trees

“

Specifications

• Model: SSXG005 / SSXG002
• Accessories: Screwdriver, wrench, sisal columns, cushion,
  spring toys, doorknob, door stopper, anti-tipping rope, furball
  toys, rotating shaft, adjustable footrest, 3-in-1 screws

Product Usage Instructions

Safety Instructions

1. Assemble the product according to the provided
   instructions.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
   during assembly.
3. Ensure the assembly area is clean, well-lit, and
   bystander-free.
4. Do not assemble when tired or under the influence of
   substances.
5. Assemble on a flat, level, hard surface capable of supporting
   the product.
6. Do not sit or stand on the product.
7. Do not exceed weight capacities.
8. Inspect for damage before each use.

Installation Steps

1. Step 1: Install the adjustable foot pad on the
   base.
2. Step 2: Follow the three-in-one screw
   installation method.
3. Step 3: Assemble the bottom cabinet and other
   components as shown in the figure provided.

FAQ

Q: What should I do if I find damaged parts during
assembly?

A: Do not use the product if parts are loose or damaged. Contact
technical support for assistance.

Q: Can children play near the Box Style Cat Trees?

A: This product is not a toy. Do not allow children to play with
or near it to prevent accidents.

Q: Are there any weight restrictions for the product?

A: Do not exceed specified weight capacities to ensure safe
usage of the Box Style Cat Trees.

“`

Technical Support and E-Warranty Certificate www.vevor.com/support
BOX STYLE CAT TREES USER MANUAL
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.

BOX STYLE CAT TREES
MODEL:SSXG005 / SSXG002
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
1

SAFETY INSTRUCTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions 1. Assemble only according to these instructions. Improper assembly can
create hazards. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly. 3. Keep the assembly area clean and well-lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble if tired or when under the influence of alcohol, drugs
or medication. 6. The product capabilities apply to properly and completely assembled
products only. 7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Box Style Cat Trees. 8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions 1. DO NOT SIT OR STAND ON THIS ITEM. 2. This product is not a toy. Do not allow children to play with or near this
item. 3. Do not exceed specified weight capacities. 4. Use only on a flat, level, hard, and smooth surface that can safely
support a fully loaded Box Style Cat Trees. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
2

Accessories table

A×1 D×1

B×1 E×1

C×1 F×1

G×1

H×1

I×1

J×1

K×1

L×1

M×1

N×2

O×1

*Each set comes with a screwdriver and wrench

3

Accessories table
(Sisal columns) 18cm

(Wrap the column) 14.5cm

22cm

24cm

30cm

1 ×1 (cushion)

2 ×2

3 ×2

(cushion)

4 ×1

5 ×1

6

7

8

9

(Spring toys)

(doorknob) (Door stopper) (Anti-tipping rope) (Furball toys)

S×1

U×2

V×2

W×1

(Rotating shaft) (Adjustable footrest) (3-in-1 screws)

X1×3

X2×1

(M6*40)

(M4*22)

Y×4

Z×4

(M4*12)

T1 x12

Q1x16 (M8*30)
T2 x5 4

Q2x4

Q3x2

(M8*70)

(M3*12)

T3 x4

T4 x16

Installation Steps
Step 1
A

Install the adjustable foot pad on the base as illustrated;

Z

A

Zx4

T1X12

Step 2
The three-in-one screw installation method is shown in the figure;

Step 3

As shown in the figure,

V

assemble the corresponding

door stopper and the small

black nose U;

B

J D

N

U

C T4

Assemble the bottom cabinet first as shown in the figure;
Note: Align the holes before tightening
Q1X12

Put the spindle plate first, and then put the hinge Place on the door and tighten the screws;

T4x16

Q3x2

B

C

D

J

Nx2

Yx4

Vx2

Ux2

5

Step 4
I
G
Q2

E F
H

I H
Insert the I plate and H plate into the top groove of the cabinet;

8
Step 5

Assemble the cat nest above the cabinet as shown in the figure, and finally put the mat 8 on;

8

Q1X4

Q2X4

E

F

G

H

I

7 M

9
K
As shown in the figure, the plank K plank M and the corresponding pillar are installed, and finally the mat 7 and the mat 9 are put on;

2 5
2

T3x2

T2x3

K

M

9

7
6

Step 6

6

walls

W
1
X2

O

Plug the expansion pipe into the wall,

3

and then fix the anti-tipping rope on the

wall with self-tapping wire; Finally, use

screws to fix the other side to the cat

climbing frame.

S

X1
4
3

After installing the planks and posts as shown in the picture, install the hairball toy and spring toy, and finally tighten the screws to fix them.

O
7

S

X1 X2

T2x2
6

T3x2 W

Model Colour Product Size

PRODUCT PARAMETER

SSXG002 Gray
575*500*1380mm

SSXG005 Brown
575*500*1380mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
E-CrossStu GmbH
EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.
YH CONSULTING LIMITED.
UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

8

Technical Support and E-Warranty Certificate www.vevor.com/support

Documents / Resources

VEVOR SSXG005,SSXG002 Box Style Cat Trees [pdf] User Manual SSXG005, SSXG002, SSXG005 SSXG002 Box Style Cat Trees, SSXG005 SSXG002, Box Style Cat Trees, Style Cat Trees, Cat Trees

References

• User Manual