VETEK OCS-V High Resolution Digital Crane Scale
Product Information
Specifications
- Accuracy: Chinese GB/T 11883-2002 CIII eqv. OIML R76
- Tare Range: 100% F.S.
- Zero Range: 4% F.S.
- Stable Time: 10 seconds
- Overload Safety: 100% F.S. + 9e 120% F.S.
- Load Battery: 18650 lithium battery
- Battery: DC5V charger
- Battery Life: >20 hours
- Display: 115*41mm LED display
Product Usage Instructions
Operation and Maintenance
- Do NOT overload the scale to avoid damaging the load cell and voiding the warranty.
- Do NOT leave the load hung on the scale for extended periods as it can decrease accuracy and shorten the load cell’s life.
- Inspect the shackle, hook, clips, pins, and screws regularly before using the scale.
- Check the battery frequently and replace dead batteries with new ones promptly.
- Rotate the load instead of the scale if needed.
- Avoid using the scale under thunder or rain conditions.
- Hang the scale on a shelf in a dry and well-ventilated room; do NOT place it directly on the ground.
- Do NOT attempt to repair the scale yourself; contact your local representative for assistance.
- Use only the original DC5V charger; do NOT use external chargers.
FAQ
- Q: How do I change the Auto-Off Timing on the scale?
A: Press the corresponding keys as described in the User Setup section to access the Auto-Off Timing setting. Then, use the provided instructions to change the timing value to your desired setting. - Q: What is the default Idle Mode Timing setting for the scale?
A: The default Idle Mode Timing setting is 30 seconds. You can adjust this setting using the instructions provided in the User Setup section.
User Guide
For good performance and precise measurement, be careful with daily operation and maintenance.
- Do NOT overload scale. This will damage loadcell and void warranty.
- Do NOT leave load hung on the scale for long. This will decrease scale’s accuracy and shorten loadcell’s life.
- Inspect shackle and hook before using. Check clips, pins and screws regularly.
- Check battery frequently. When scale runs out of power, replace the dead batteries with new ones.
- Rotate load rather than scale if needed.
- Do NOT use scale under thunder or rain.
- Hang scale on shelf in dry and well-ventilated room. Do NOT place scale on the ground directly.
- Do NOT attempt to repair scale yourself. Contact your local representative.
- Do NOT use external chargers, Use the original DC5V charger.
Specifications
| Accuracy | Chinese GB/T 11883-2002 CIII eqv. OIML R76 |
| Tare Range | 100% F.S. |
| Zero Range | 4% F.S. |
| Stable Time | ≤10sec |
| Overload | 100% F.S. + 9e |
| Safety Load | 120% F.S. |
| Battery | 18650 lithium battery DC5V charger |
| Battery Life | >20hour |
| Display | 115*41mm LED display |
- Op. Temp.
- -10℃ ~ +40℃
Display & Keys
| Key | Name | Function |
 |
On/Off | Power-on Power-off |
 |
Zero | Zero |
 |
Hold | Lock/unlock |
 |
Tare | Tare in/out |
Remote Keys
| Key | Name | Function |
 |
Zero | Zero: Change digit |
 |
Tare | Tare in/out: Move digit |
 |
Hold | Lock or unlock: Confirm & Next |
 |
Acc. | 2nd function: Change digit |
 |
Del. | 2nd function: Move digit |
 |
F1 | 2nd function |
 |
F2 | Unit Switch |
 |
Off | Long press to power off |
 |
2nd | 2nd function |
User Setup
Press first then press to enter User Setup menu. shows.
Auto-Off Timing
- Press to enter Auto-Off Timing. OFF– shows.
- Press or to change timing value.
- Auto-Off Timing can be set to: 0 (disabled), 5 (5min),10 (10min), 15 (15min), 30 (30min), 60 (60min).
Display Brightness
- Press to enter Backlight Brightness. br— shows.
- Press or to change brightness value.
- Display Brightness can be set to 0-7 levels.
Idle Mode Timing
- Press to enter Idle Mode Timing. idE— shows
- Press or to change timing value.
- Idle Mode Timing can be set to: 0(disabled), 5(5sec), 10(10sec), 15(15sec), 30(30sec), 60 (60sec). It is 30sec by default.
- Press to exit User Set.
Documents / Resources
 |
VETEK OCS-V High Resolution Digital Crane Scale [pdf] User Guide OCS-V High Resolution Digital Crane Scale, OCS-V, High Resolution Digital Crane Scale, Resolution Digital Crane Scale, Digital Crane Scale, Crane Scale |
