Veepeak VP11

Product Information
Specifications
- Model: VP11
- Version: V2.2503
- Connection Method: Classic Bluetooth (Not Bluetooth LE)
- Compatibility: Not compatible with BimmerCode, BimmerLink, OBDeleven, Carly App, ABRP, etc.
This user guide contains step-by-step setup guide, FAQ & troubleshooting, compatible App list along with advanced diagnostic availability, and EV compatibility guide.
Setup Guide
(Take Car Scanner App for example; Settings for other apps are followed.)
- Install the App from Google Play Store (Car Scanner ELM OBD2 by OvZ).

- Plug in the device, and make sure it fit snugly (try to push it a little harder if it does not connect to vehicle ECU). Then turn on car ignition. Go to phone’s Bluetooth Settings, and pair new device. Wait for “OBDII” to show up. The first time can take a little longer.

- When “OBDII” shows up, tap on it. Use pin 1234 to pair with it. (If it does not pair, follow the troubleshooting steps in the user instructions or troubleshooting guide)

- After pairing, it may not show as connected. On a Pixel 4a, it shows as Saved. You do not need to select it to connect again. You can ignore the status and proceed to the next step.

- Start the App, grant the App permissions (Bluetooth or Nearby devices), make the initial settings according to your preferences. Since Android 13, you will need to grant “send notifications” permission if you want to the App to run in the background.

- In Settings – Adapter OBDII ELM327, please select Bluetooth as connection type, then under “select device”, select OBDII on the list.

- For connection profile, select your car brand and then the applicable profile. If no other suitable profile is available for your specific vehicle, select the first “OBD II / EOBD”.

- After the above two marked settings are made, go back to the main page and click Connect button. When the connection to both ELM & ECU are made, you can start to use.

Connection Settings
Connection Settings for Other Popular Apps
Torque Lite/Pro (Pro version is paid)
- Go to Settings – OBD2 Adapter Settings, select “Bluetooth” as Connection type, and “OBDII” as the Bluetooth device. Close the App, and restart it.
- You can check the connection status from main page – Adapter Status.
Tip: If the device goes to previously connected device list and then does not show up in Torque App, please forget it and re-pair with it. As soon as the pairing passcode is entered, switch to Torque App immediately to select OBDII as the Bluetooth device (you can first navigate to that setting page before pairing). 
OBD Fusion (paid)
Android: Settings – Preferences – Communications, select Bluetooth as the communication type, and select OBDII as the Bluetooth device.
How to get enhanced diagnostics in OBD Fusion (requires separate purchase):
- Connect to your vehicle by following the instructions on the Settings > Help > Connection page.
- Open the vehicle editor on the Settings > Vehicle Editor page.
- Use the Select buttons to enter the full year, make, model, and option for your vehicle. You must use the Select buttons to enter this information. If your year, make, model, or option is not listed, you can manually enter it, but enhanced diagnostics will not be available for your vehicle.
- Open the Settings > Purchase Extras page and wait for the app to load the list of extra items.
- Select the category corresponding to the make of your vehicle.
- Find and select the package corresponding to your vehicle year, such as Ford 2003 Enhanced Diagnostics. If you have vehicle(s) supported by this add-on, you will see a list of the vehicles at the bottom of the page. If you do not have any vehicles supported by this add-on, you will see a message indicating that you do not have any vehicles supported by this add-on.
Infocar (free with some in-app purchase features)
- A smart vehicle management app that provides vehicle diagnosis and information on driving style.
- Tap on “Connection” or go to Settings, select Bluetooth as Connection type, and select OBDII under “Paired devices” (if it’s has been paired in phone Bluetooth settings), or “Available devices” (if it has not been paired) to pair.

OBD JScan (iOS & Android)
Android: select VEEPEAK under Bluetooth OBD (2.0, 3.0) adapters as the OBD adapter.
Dr. Prius (free)
Android: please tap to select OBDII under Bluetooth OBD2 to connect.
Carista OBD (advanced features require subscription)
Go to https://carista.com/en/supported-cars to check vehicle compatibility). Android: select ELM327 Bluetooth as the adapter.
Note:
- These Apps can be downloaded from Google Play Store. App price is decided by the developer and not included with the device.
- The VP11 is not compatible with iOS devices and iOS Apps.
- For some Android devices, the device “OBDII” may not show as connected after pairing, but you can just start the App to connect. No need to select it to connect again.
- Please be sure to grant devices nearby permissions for in order for these Apps to access Bluetooth. Some Apps may require location permission for some features. And “send notifications” permission is required for the App to run in the background.
| Recommended Third-Party Android Apps for VP11
(Generic OBD II Features for OBD II compliant vehicles; App Not Included) |
|||||
| App Name | Developer | Compatible Platform | Notes: | Price (may vary depending on the developer) | |
| Car Scanner ELM OBDII | 0vZ | Android | Compatible with a lots of hybrids & EVs and comes with a few extended PIDs for some vehicles. Please check in the App by selecting the car brand & connection profile. | Mostly Free | ![]() |
| OBD Fusion | OCTech, LLC | Android | Comes with enhanced diagnostics on Ford, Lincoln, Mazda, Toyota, Lexus, Nissan, Infiniti, Dodge, RAM, Chrysler, Jeep, and some FIAT and Alfa Romeo vehicles. | Paid; enhanced diagnostics require separate in- app purchase | ![]() |
| Infocar – OBD ELM Diagnostic | Infocar Co., Ltd. | Android | A smart vehicle management app that provides vehicle diagnosis and information on driving style. | Mostly Free with in-app purchase for some features | ![]() |
| Torque Lite/Pro (OBD II & Car) | Ian Hawkins | Android | See what your car is doing in real time, get OBD fault codes, car performance, and sensor data. | Paid | ![]() |
| Other Android Apps that you can try for free | EOBD Facile,Piston – OBDII Car Scanner, OBD Mary,OBD Auto Doctor scanner | Mostly require purchase for some features; try to avoid Apps that are not on this list. | |||
| Vehicles since the following model year are OBD II compliant and compatible (excluding hybrid plug-in and electric vehicles): | |||||
| United States | 1996 | ![]() |
|||
| Canada | 1998 | ||||
| European Union | 2001 (gas), 2004 (diesel) | ||||
| Australia | 2006 (gas), 2007 (diesel) | ||||
| Mexico | 2006 | ||||
| Japan | 2002 | ||||
| New Zealand | 2006 | ||||
Note: If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-II legislation.
| Advanced Diagnostic Availability for VP11
(ABS, SRS, body control, etc., for Selected Vehicles) |
|||
| Car brand | Required Android App | Supported model year | Special Notes |
| Ford, Lincoln & Mercury | OBD Fusion | 1996 – 2022 | Requires in-app purchase of advanced diagnostics add-on |
| FORScan Lite | 1996 – 2023 | Paid; Some models from 2023 are notyet supported | |
| Mazda | FORScan Lite | 1996 – 2022 | 7G models may not be supported |
| OBD Fusion | 1996 – 2023 | Requires in-app purchase of advanced diagnostics add-on | |
| Toyota, Lexus & Scion | OBD Fusion | 1996 – 2021 | Requires in-app purchase of advanced diagnostics add-on |
| Carista OBD | Check vehicle compatibility on the app website. | Requires an app subscription | |
| Nissan & Infiniti | OBD Fusion | 2006 – 2021 | Requires in-app purchase of advanced diagnostics add-on |
| Carista OBD | Check vehicle compatibility on the app website. | Requires an app subscription | |
| Mitsubishi | OBD Fusion | 2009 – 2022 | Requires in-app purchase of advanced diagnostics add-on |
| Suzuki | SZ Viewer | 2000+ | K-Line and CAN bus based |
| Subaru | ActiveOBD | 2012+ | Premium features require an in-app purchase |
| BMW | Carista OBD | 2008+ | Requires an app subscription |
| bimmer-tool | 2008+ | Paid app for Android only | |
| FCA (Jeep, Chrysler, DODGE, RAM) | OBD JScan | Check vehicle compatibility in the app | In-app purchase required |
| OBD Fusion | 2006 – 2023 | Requires in-app purchase of advanced diagnostics add-on | |
| Volkswagen/Audi/ Seat/Skoda | Carista OBD | Check vehicle compatibility on the app website. | Requires an app subscription |
| Opel/Vauxhall | ScanMyOpel, ScanMyOpelC AN | Check vehicle compatibility on the app website. | In-app purchase required |
Additional notes
- Modules in MS-CAN are not supported (For Ford vehicles);
- BMW and Mini model year before 2008 are not supported for advanced diagnostics;
- For FCA vehicles equipped with secure gateway (around 2017 or 2018+), an additional adapter is required to clear advanced codes. Please refer to the app page for more information.
- No specially developed third-party apps with advanced diagnostics for Mercedes-Benz/Smart, GM group, Hyundai/Kia, Honda/Acura, Porsche, Renault, etc. so far. However, you can check OBDocker or GaragePro App (requires subscription) as they may offer advanced diagnostics for some vehicles.
- Vehicles from recent years may not have been supported for advanced diagnostics. Please go to the app website to check.
- App Not Included; pricing information may change depending on the developer.
- The list will be updated from time to time when new brands or models are supported. It’s recommended to contact Veepeak customer service to check if your vehicle is not listed.
EV Compatibility Guide |
|||
| Car Make | Supported Model Year | Required App | Note |
| For Most EVs & PHEVs, please first check Car Scanner ELM OBD2 App (free) and see if there is a suitable connection profile. More Apps can be found below. | |||
| Tesla | Model S, 3, X & Y | scan my tesla | Requires extra adapters; speed may not be very fast. |
| Audi | e-tron, Q4 E-tron, Q5 E- tron | ABRP, Carista, eFlow | May not work with Android version of ABRP |
| BMW | 2013+ i3, i8 | BimmerLink | Paid |
| i, iX, PHEV, Mini Cooper SE 2019+ | eFlow (Formerly BimmerFlow) | In App purchase | |
| Chevrolet | Bolt, Spark, Volt | ABRP, Torque Pro Android | Torque Pro requires custom PIDs |
| Toyota | Prius | Dr Prius | Check on https://priusapp.com/ for more supported Toyota hybrid vehicles |
| bZ4X | ABRP | May not work with Android version of ABRP | |
| Nissan | Leaf | Leaf Spy Pro | Paid App |
| Hyundai/Ki a | IONIQ, Kona, Soul, Niro | ABRP | May not work with Android version of ABRP |
| IONIQ, Kona, Soul, Niro | EVNotify | ||
| Volkswagen | e-Golf, e-Up!, ID.3, ID.4, ID.5, ID.6, ID.7 | ABRP, Carista | May not work with Android version of ABRP |
| Ford | Mustang Mach-E | ABRP | May not work with Android version of ABRP |
| Porsche | Taycan 2019-2023 | eFlow | In App purchase |
Extra Notes:
|
|||
Troubleshooting
If you could not find the answer or still have troubles getting it to work properly after troubleshooting, please reach out to Veepeak customer support at support@veepeak.com for assistance or replacement. Please include a screenshot of the error message so we can better look into the issue. Our customer service is friendly and the replacement process is hassle-free.
Device does not power up (no red light).
Device powers up, but “OBDII” is not showing up on my phone's Bluetooth device list.
When trying to pair it with my iPhone, it says it’s not supported.
Could not pair my Android phone with “OBDII”.
“OBDII” quickly disconnects or does not show as connected after pairing.
App not connecting to OBD II Device (ELM connection fails).
Cannot connect to vehicle (ECU connection fails
Connection is unstable and gets disrupted during use.
No data is read after it connects to the vehicle.
Could not read the trouble codes.
Could not clear trouble codes.
FAQs
What connection method does it use?
Is there an App included with the device? How to choose the app for my vehicle?
Which devices does it support? Does it work with Android head units?
What connection method does it use?
Do I need to make it show as connected in phone’s Bluetooth settings?
What’s the difference between OBD-II standard and enhanced/advanced diagnostics?
Does it work with hybrid plug-in (PHEV) or all-electric vehicles (BEV)?
Can it do enhanced diagnostics to read or reset my ABS, or airbag lights?
Which sensor data can I get?
Does it read transmission temperature?
Which apps are not supported?
Can I leave the device plugged in all the time?
Does it work with motorbikes?
Where can I find how to connect & use videos?
Documents / Resources
![]() | VP11 |
References
- User Manualmanual.tools



