Contents
hide
VARMILO FK2 Fighting Game Keyboard
FEATURES
Product Description
Three-way outlet
- Direct outlet: install the Type-C wire first, and then install the silicone anti-shedding sheath.
- Left and right outlet: After taking out the silicone anti-shedding sheath, outlet the Type-C left or right according to personal needs.
Introduction to the functional keys
- RE: Function introduction of the function keys on the upper left (from left to right)
- A Power on (welcome rainbow light), the white light is always on (working status), the red light flashes 3 times (when resetting)
- G Left-handle mode, right-keyboard mode (please disconnect when switching modes).
- Turn the switch to the left: lock the keys under the handle mode.
- Turn the switch to the right: lock the keys under keyboard mode.
Handle mode/Keyboard mode
- G) toggle switch on the left G toggle switch on the right
- A) Signs lamp Signs lamp
- B) Start Enter
- C) Back Unused
D) Guide Unused - E) Unused Mouse Left
- F) Reset Reset
- G) Mode switch and lock-key switch Mode switch and lock-key switch
Switch replacement instructions
FK2 Specifications
| Case materials | ABS |
| Keycaps materials | ABS |
| Dimensions(mm) | 329.23.224.22*26.8 (mm) |
| Weight(g) | 1404.2g |
| Trigger travel(mm) | 1.5mm(+0.3mm/-0.2mm) |
| Trigger Force(GF) | 40gf (+10gf/-10gf) |
| Terminal Force(GF) | 50gf(+10gf/-10gf) |
| Original trigger travel (mm) | 0.3mm(+0.1mm/-0.1mm) |
| Reset Travel (AUTO) (mm) | Release Sensitivity 0.2mm |
| Power Consumption (mAh) | 5V 35mAh below |
| Response speed after triggering (ms) | 5ms within |
| Polling rate (Hz) | support 1000Hz |
SOCD Setting
- Note: before the manual setting, turn the toggle key to the lock key, and then the manual setting will take effect in both handle mode and keyboard mode.
- When the user deletes or changes any of the ASDW keys in the web driver, the SOCD setting of the default key layer in keyboard mode becomes invalid.
- Tips for successful setting: The green light in the upper left corner of the keyboard flashes three times and then returns to white.
Switching instructions
Five-layer layout switching instructions
- Note: before the manual setting, turn the toggle key to the lock key, and then the manual setting the layer will take effect in keyboard mode only.
- Tips for successful setting: The green light in the upper left corner of the keyboard flashes three times and then returns to white.
| Ml-MS Layer switching | Ml | Unused+K9 |
| M2 | Unused+K6 | |
| M3 | Unused+K5 | |
| M4 | Unused+K7 | |
| MS | Unused+K8 |
Keys function description
Introduction to the Web Driver
Functions of the Web Driver
- Key Setting
- Applied to keyboard mode. There are five key layers in keyboard mode. The 14 keys on each layer can be reset, and the key layer can be renamed.
- Travel Setting
- Three travel modes, compatible with multiple game types, with extremely fast triggering and quick releasing.
- Matrix Test
- Detect whether the keys are effectively triggered
- Performance Setting
- SOCD mode setting, applied to handle mode and keyboard mode.
- Handle key switch
- The key positions in the handle mode can be interchanged one-to-one.
- The above functions do not require any software. You only need to visit https://fk2.varmilo.com to set the functional parameters of the fighting game keyboard.
- https://fk2.varmilo.com
- Manufacturer: Shenzhen Zhihaihe Tech Co., Ltd
- Address: 5th Floor, Block 2, 10th Industrial Zone, Tian Liao Community, Yu Tang Area, Guang Ming District, Shenzhen, China
- Telephone: +8675526484009
Documents / Resources
 |
VARMILO FK2 Fighting Game Keyboard [pdf] User Manual FK2 Fighting Game Keyboard, FK2, Fighting Game Keyboard, Game Keyboard, Keyboard |