V I V O VP02W Universal Extending Ceiling Projector Mount Instruction Manual

Note: Do not install into drywall alone. Verify your ceiling construction and use wood studs to mount. If unsure, please contact us for assistance.

Option B: Concrete/Brick Mounting

Use the top plate of the arm (A) to mark the mounting holes on the ceiling.

Using a drill bit, drill approximately 2.4 inches into the ceiling.
Use concrete anchors (W-B), bolts (W-A), and washers (W-C) to mount the arm (A).

Step 3: Bracket Mounting

Mount bracket (B) to arm (A) using spacers (M-L), plates (M-M), bolts (M-I), and washers (M-J, M-K). Tighten using the Allen wrench (T-A).

Step 4: Projector Mounting

Adjust the arms of the bracket (C) to fit the mounting holes of your projector. Use bolts (M-A, M-B, M-C, M-D) and washers (M-E, M-F, M-G, M-H) depending on the size of the mounting holes in your projector.

Step 5: Securing the Mount

Hook the mount (B) to the bolts at the bottom of the mount (A). Secure using bolts (M-I) and washers (M-J, M-K). Tighten using the Allen wrench (T-A).

Step 6: Adjustments

Adjust the height and tilt of the mount using the Allen wrench (T-A).

Frequently Asked Questions

Q: Can this mount be used for heavy projectors?

A: The weight capacity of this mount is 30 lbs (13.61kg). Make sure not to exceed this limit.

Q: Can I install this mount into drywall alone?

A: No, it is not recommended to install this mount into drywall alone. Verify your ceiling construction and use wood studs for mounting. If you are unsure, please contact us for assistance.

Q: What tools do I need for the assembly?

A: You will need a drill and a Phillips screwdriver for the assembly process.

Q: How can I contact customer support?

A: You can reach our dedicated support team by email at help@vivo-us.com, through live chat on our website www.vivo-us.com, or by calling 309-278-5303.
Our support team is available Monday-Friday from 7:00 am-7:00 pm CST.

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician.
Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury.
Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

WASHER SPECIFICATION KEY
M	Compatible Screw Size
OD	Outside Diameter

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS TO MOUNT.
We include mounting for brick and concrete.
If unsure, please contact us at vivo-us.com, email at help@vivo-us.com, or call us at 309-278-5303.

TOOLS NEEDED

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

OPTION A: Run cables through arm (A).
OPTION B: If running cables through the ceiling, pull cables through the top plate of the arm (A).

STEP 2

OPTION A: Drywall Mounting Use the top plate of the arm (A) to mark mounting holes on the ceiling.
Using a 3/16” drill bit, drill approximately 2.2” into the ceiling stud. Put arm (A) in place and mount it to the pre-drilled holes using bolts (W-A) and washers (W-C) as shown in the diagram.
OPTION B: Concrete/Brick Mounting Use the top plate of the arm (A) to mark mounting holes on the ceiling. Using a ⅜” drill bit, drill approximately 2.4” into the ceiling. Use concrete anchors (W-B), bolts (W-A), and washers (W-C) to mount the arm (A) as shown in the diagram.

Mount bracket (B) to arm (A) using spacers (M-L), plates (M-M), bolts (M-I), and washers (M-J, M-K). Tighten using the allen wrench (T-A).

STEP 4

Adjust arms of the bracket (C) to fit the mounting holes of your projector. Use bolts (M-A, M-B, M-C, M-D) and washers (M-E, M-F, M-G, M-H) depending on the size of mounting holes in your projector.

STEP 5

Hook the mount (B) to bolts in bottom of mount (A). Secure using bolts (M-I) and washers (M-J, M-K) as shown in diagram. Tighten using the allen wrench (T-A).

STEP 6

Adjust height and tilt of mount using the allen wrench (T-A).
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us.

We are happy to replace parts to ensure you have a fully functioning product.

309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S

www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M

23% within < 15m
38% within < 30m
61% within < 1hr

83% within < 2hr
92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

SKU: MOUNT-VP02W
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-vp02b

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

Documents / Resources

V I V O VP02W Universal Extending Ceiling Projector Mount [pdf] Instruction Manual
VP02W Universal Extending Ceiling Projector Mount, VP02W, Universal Extending Ceiling Projector Mount, Extending Ceiling Projector Mount, Ceiling Projector Mount, Projector Mount, Mount

References

User Manual

V I V O VP02W Universal Extending Ceiling Projector Mount

Product Usage Instructions

PACKAGE CONTENTS

TOOLS NEEDED

ASSEMBLY STEPS

Documents / Resources

References

Leave a comment

Cancel reply