UVISION AllPlay Smart Projector User Manual

Connect the power cable to the projector and plug it into a wall
outlet. Insert batteries into the remote control following the
instructions provided.

3. Grab Your Remote Control

Ensure you have your remote control handy for operating the
projector.

4. Product Overview

Familiarize yourself with the various components of the
projector including the projection lens, camera, external tripod
mount, speaker sound hole, and connection ports.

5. Connection Ports

Port Descriptions:

Line Out: Connect analog audio systems.
HDMI: High-quality audio/video connection for
cable boxes, Blu-ray players, gaming consoles, etc.

USB: Access photos, music, and movies from a
USB device.
DC: Power connection using the included power
cable.

6. Power Indicator

Understand the power indicator to monitor the status of the
projector.

7. Keystones & Focus

Adjust keystone settings and focus to ensure optimal image
quality during projection.

Frequently Asked Questions (FAQ)

Q: What should I do if an item is missing from the
packaging?

A: If any item is missing, please contact the
seller promptly to address the issue and request the missing
item.

Q: How should I dispose of used batteries?

A: Dispose of used batteries according to local
waste disposal regulations to ensure proper handling and
environmental safety.

“`

View Fullscreen

UVISION AllPlay Smart Projector
User Manual

What’s in the box
When opening the packaging, check the contents of the box against the list below. If there is anything missing, please contact the seller in due time.

Smart Projector

Adapter

Power Cord

Remote Control

User Manual

Warranty Card

Note: – The actual contents may vary depending on the country (or region) of sale, please refer to the actual product. – Retain the original packaging for future storage or transportation.

Getting Started
SD

D
Projection Screen

Projection Screen

Determine the distance between the projector and the wall or screen according to the desired screen size.

Screen Dimensions (SD) 40″ 60″ 80″ 100″ 120″

Relative Distance (D) 110 165 219 274 330

Relative Height (H) 8.5 21 33.5 46 58

Screen Dimensions (SD): The diagonal size of the projection screen (in inches). Relative Distance (D): The distance between the projector and the wall or screen (in cm). Relative Height (H): The distance from the bottom of the projector to the bottom edge of the projected image (in cm).

Note:
The dimensions in the table above are for reference only, they are approximate and may slightly differ from the actual values.

Power up
Connect your power cable to the projector, then plug it in to the wall outlet. Power your projector remote control by inserting the appropriate batteries. (batteries not included) Connect other devices by referencing port label and descriptions on the next page.

Step 1. Push the back cover in the direction of the arrow, and after hearing a sound, the back cover will separate from the remote control.

Step 2. Remove the back cover, then take out the battery.

Step 3. Install the battery, then put the back cover onto the remote control and push it firmly in the direction of the arrow until it clicks into place. Once you hear a sound, it indicates that it has been installed properly.

Note:
– Pay attention to the positive and negative poles when installing batteries in the remote control.
– When battery leaks, immediately wipe away any fluid with a dry cloth and replace the batteries with new ones.
– Dispose of used batteries according to local waste disposal rules and regulations of the country or area you live in.

Grab your remote control
POWER: Turn Projector on and off PROFILE SELECTOR: Switch between different Google accounts SETTINGS: Access the settings GOOGLE ASSISTANT: Press the Assistant button on your remote to talk to Google Assistant NAVIGATION PAD: Move up, down, left, or right, then press the middle button to confirm BACK: Return to previous screen HOME: Return to home screen LIVE GUIDE: Launch Play Movies & TV Volume Button: + Increase the volume – Decrease the volume Netflix: Access the Netflix App Youtube: Access the Youtube App
5

Product Overview
Projection Lens Camera Heat Dissipation Vents
External Tripod 1/4 inch Nut (Depth 5mm)

Speaker Sound Hole Air Vents Port
Power Button and Indicator Light

CAUTION: – Do not place objects within 20cm near the heat dissipation vents. – Do not place any objects near the vents, as this may cause heat to build up inside the projector. – Do not look directly into the lens so as to avoid eye damage as this projector emits strong light during use.

Connection Ports
Line Out: Connect an analog cable to an external analog audio system. HDMI: Highest quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your projector using HDMI cables. USB: Connect a USB device to access photos, music and movies. DC: Connect your projector to the power source with the included power cable.
7

Power Indicator
Power Indicator
Press the power button on the body and the power button on the remote control to turn it on and off. The power indicator (a soft white light) to the corresponding projector’s status is as follows: – During the startup process, the indicator light is always on and then blinks breathingly, and then goes out after entering the main interface of the system. – After entering the system, the indicator light is always off. – After entering the shutdown screen, the indicator light is always on. – When the system is in standby, the indicator light is off. – The breathing light is always on during the shutdown process, and the breathing light is off after the shutdown.
8

Keystones & Focus
1. Move the projector, the screen will be omni-directional automatic correction and autofocus. 2. Open the settings menu, find Projector in Settings, here you can choose Keystone Correction or Focus to realize the function.
9

Hoisting Instructions
1/4 inch nut (depth 5.5 mm)
Note: – For hoisting, please use screws of specified specifications and select a suitable bracket.
10

Specifications

Basic Information
Electrical Specifications Optical Parameters

Name Model Item Dimensions Weight Total Power Standby Power Input Resolution Ratio Ratio Focus Keystone Correction

System

Storage System Bluetooth Wireless

Audio Others

Audio Effects Speaker Noise

Storage Temperature/ Humidity Operating Temperature/ Humidity

UVISION AllPlay Smart Projector

UVAPSP-1

207*190*127 mm

2.07 kg

100W

0.5W

DC19V

6.32A

1920*1080

1.25:1

40~120”

Auto Focus

Omni-directional auto-keystone

correction

2G DDR/16G eMMC

Google TVTM

BT 5.0

Wi-Fi IEEE 802.11 a/b/g/n/ac

2.4GHz/5GHz

Dolby Audio

2×5W Full-range

30dB viewing mode @ ambient temperature of 25 -20 to 55 / 90%

0 to 40 / 20%80%

Troubleshooting

Fault No projected image
Android system crashes
Screen display error
Remote control is missing or not paired and the projector cannot be turned on remotely. If the projector overheats, it will automatically turn off.
Other Internal System Errors

Solution Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector. Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector. Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector. Turn off the projector and disconnect from the power. Wait for five minutes, then plug in the power cord and turn on the projector. After the projector has been restarted, pair the remote control again. Please remove any obstacles from the air inlets and outlets so as to ensure a smooth airflow through the projector. Follow the instructions above to restart the projector. Please contact a qualified technician to service the device, or return the projector to the after-sales department.

Regulatory
Hereby, [UVision Innovation Co., Ltd.] declares that the radio equipment type [AllPlay Smart Projector / UVAPSP-1] is in compliance with Directive 2014 / 53 / EU and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: http://www.uvision.com/pages/support/declaration.html This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. BT maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz Wi-Fi 2.4G maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz Wi-Fi 5G maximum transmitter power: 200mW at 5.15GHz – 5.25GHz,100mW at 5.25GHz 5.35GHz & 5.47GHz – 5.725GHz The product complies with “RG1 IEC/EN 62471-5 : 2015”.
13

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Correct disposal of the batteries in this product (Applicable in countries with separate collection systems) This marking on battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
14

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15

RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person’s body.
Canada regulatory compliance This device complies with Innovation, Science and Economic Development Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a persons body.
CAN ICES-003 (B)/NMB-003(B) Le présent appareil est conforme aux CNR dInnovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisée aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible den compromettre le fonctionnement.
16

La bande 51505250 MHz est réservée uniquement pour une utilisation à lintérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Lexposition à lénergie radiofréquence La puissance de sortie rayonné de cet appareil est conforme aux limites de la FCC/IC limites dexposition aux fréquences radio. Cet appareil doit être utilisé avec une distance minimale de séparation de 20 cm entre lappareil et le corps dune personne.
CAN ICES-003 (B)/NMB-003(B)
CAUTION: – Risk of explosion if the battery is replaced by an incorrect type. – Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. – Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. – A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
17

Product Certifications

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Google TV is the name of this device’s software experience and a trademark of Google LLC. Google and YouTube are trademarks of Google LLC.
Google Assistant is not available in all languages and countries. Availability of services varies by country and language.
The product marking and safety information are located at the bottom of the product.

support@uvision.com.tw www.uvision.com

Documents / Resources

UVISION AllPlay Smart Projector [pdf] User Manual
AllPlay Smart Projector, AllPlay, Smart Projector, Projector

References

User Manual

UVISION AllPlay Smart Projector User Manual

AllPlay Smart Projector

Specifications

Product Usage Instructions

1. Getting Started

2. Power Up