UVISION AIIPlay Smart Projector User Manual

What's in the box

When opening the packaging, check the contents of the box against the list below. If there is anything missing, please contact the seller in due time.

Contents include:

• Smart Projector
• Adapter
• Power Cord
• Remote Control
• User Manual
• Warranty Card

⚠ Note: The actual contents may vary depending on the country (or region) of sale, please refer to the actual product. Retain the original packaging for future storage or transportation.

Getting Started

Determine the distance between the projector and the wall or screen according to the desired screen size.

Screen Dimensions (SD): The diagonal size of the projection screen (in inches).

Relative Distance (D): The distance between the projector and the wall or screen (in cm).

Relative Height (H): The distance from the bottom of the projector to the bottom edge of the projected image (in cm).

⚠ Note: The dimensions in the table above are for reference only, they are approximate and may slightly differ from the actual values.

Power up

Connect your power cable to the projector, then plug it in to the wall outlet.

Power your projector remote control by inserting the appropriate batteries. (batteries not included)

Connect other devices by referencing port label and descriptions on the next page.

Remote Control Battery Installation:

1. Step 1: Push the back cover in the direction of the arrow. After hearing a sound, the back cover will separate from the remote control.
2. Step 2: Remove the back cover, then take out the battery.
3. Step 3: Install the battery, then put the back cover onto the remote control and push it firmly in the direction of the arrow until it clicks into place. Once you hear a sound, it indicates that it has been installed properly.

Note:

• Pay attention to the positive and negative poles when installing batteries in the remote control.
• When battery leaks, immediately wipe away any fluid with a dry cloth and replace the batteries with new ones.
• Dispose of used batteries according to local waste disposal rules and regulations of the country or area you live in.

Grab your remote control

POWER: Turn Projector on and off

PROFILE SELECTOR: Switch between different Google accounts

SETTINGS: Access the settings

GOOGLE ASSISTANT: Press the Assistant button on your remote to talk to Google Assistant

NAVIGATION PAD: Move up, down, left, or right, then press the middle button to confirm

BACK: Return to previous screen

HOME: Return to home screen

LIVE GUIDE: Launch Play Movies & TV

Volume Button: [+] Increase the volume, [-] Decrease the volume

NETFLIX: Access the Netflix App

YouTube: Access the YouTube App

Product Overview

Front View:

• Projection Lens
• Camera
• Heat Dissipation Vents
• External Tripod 1/4 inch Nut (Depth 5mm)

Rear/Side View:

• Speaker Sound Hole
• Air Vents
• Port
• Power Button and Indicator Light

CAUTION:

• Do not place objects within 20cm near the heat dissipation vents.
• Do not place any objects near the vents, as this may cause heat to build up inside the projector.
• Do not look directly into the lens so as to avoid eye damage as this projector emits strong light during use.

Connection Ports

Port 1: Line Out: Connect an analog cable to an external analog audio system.

Port 2: HDMI: Highest quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your projector using HDMI cables.

Port 3: USB: Connect a USB device to access photos, music and movies.

Port 4: DC: Connect your projector to the power source with the included power cable.

Power Indicator

Press the power button on the body and the power button on the remote control to turn it on and off.

The power indicator (a soft white light) shows the projector's status:

• During startup: The indicator light is always on, then blinks breathingly, and goes out after entering the main interface.
• After entering the system: The indicator light is always off.
• After entering the shutdown screen: The indicator light is always on.
• In standby: The indicator light is off.
• During shutdown process: The breathing light is always on, and turns off after shutdown.

Keystones & Focus

1. Move the projector; the screen will undergo omni-directional automatic correction and auto-focus.
2. Open the settings menu, find Projector in Settings, and choose Keystone Correction or Focus to activate the function.

Hoisting Instructions

The projector can be mounted using a 1/4 inch nut (depth 5.5 mm).

Note: For hoisting, please use screws of specified specifications and select a suitable bracket.

Specifications

Troubleshooting

Regulatory

[CE Compliance Mark] [UKCA Compliance Mark]

UVision Innovation Co., Ltd. declares that the radio equipment type [AllPlay Smart Projector / UVAPSP-1] is in compliance with Directive 2014 / 53 / EU and Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: http://www.uvision.com/pages/support/declaration.html

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.

BT maximum transmitter power: 100mW at 2.4GHz - 2.4835GHz

Wi-Fi 2.4G maximum transmitter power: 100mW at 2.4GHz - 2.4835GHz

Wi-Fi 5G maximum transmitter power: 200mW at 5.15GHz - 5.25GHz, 100mW at 5.25GHz - 5.35GHz & 5.47GHz - 5.725GHz

The product complies with "RG1 IEC/EN 62471-5 : 2015".

Environmental and Safety Information

[WEEE Disposal Symbol] All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

[Battery Disposal Symbol] Correct disposal of the batteries in this product (Applicable in countries with separate collection systems). This marking on battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

FCC Compliance

[FCC Compliance Mark] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Information

The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person's body.

Canada regulatory compliance

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Exposure to radio frequency energy

The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person's body.

CAN ICES-003 (B)/NMB-003(B)

CAUTION:

• Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Product Certifications

[Dolby Audio Logo] [HDMI Logo]

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

[Bluetooth Logo]

Google TV is the name of this device's software experience and a trademark of Google LLC. Google and YouTube are trademarks of Google LLC.

Google Assistant is not available in all languages and countries. Availability of services varies by country and language.

The product marking and safety information are located at the bottom of the product.