UTVS-XPD-RSA Powersports Audio Amplifier
“
Product Information:
Specifications:
- Product Name: POLARIS XPEDITION REAR SPEAKER ADAPTERS
- Part Number: UTVS-XPD-RSA
- Compatibility: Polaris Xpedition models
- Includes: Rear Overhead Speaker Adapters x2, Speaker Wire
Harness x2, Mounting Hardware
Product Usage Instructions:
Installation Steps:
- Remove the two screws shown where indicated.
- Pull off the speaker and unplug it from the OEM plug.
- Remove the 4 screws on the speaker grille.
- Remove the 4 screws on the speaker mount.
- Unplug the OEM speaker from the enclosure.
- Place the UTV Stereo speaker mount onto the OEM enclosure and
secure using included hardware. - Connect the speaker wire harness to the UTV Stereo
Speaker. - Plug in the speaker to the OEM plug.
- Place the speaker into the enclosure and secure using included
hardware. - Place enclosure back into the vehicle and plug in before
securing to the roof. - Use the same OEM screws to secure the enclosure to the roof.
Repeat for the other side.
For further assistance or to watch the installation video,
contact us at info@utvstereo.com or call 480.616.2299.
FAQ:
Q: Are the Signature Series 6.5 Speakers included with this
product?
A: No, the Signature Series 6.5 Speakers (PART #: UTVS-654) are
sold separately.
Q: Can I purchase RGB LED 6.5 Speaker Rings along with this
product?
A: Yes, RGB LED 6.5 Speaker Rings (PART #: UTVS-65LSR) are
available separately for purchase.
“`
POLARIS XPEDITION REAR SPEAKER ADAPTERS
PART #: UTVS-XPD-RSA
PARTS LIST:
Rear Overhead Speaker Adapters
x2
Speaker Wire Harness
x2
Mounting Hardware:
Button Head Screws
x12
Black Countersunk Screws
x8
RECOMMENDED PRODUCTS:
1
1.
Remove the two screws shown here
2.
Pull off the speaker and unplug from the OEM plug
3.
Remove the 4 screws on the speaker grille
SIGNATURE SERIES 6.5″ SPEAKERS
PART #: UTVS-654 *SOLD SEPARATELY
RGB LED 6.5″ SPEAKER RINGS
PART #: UTVS-65LSR *SOLD SEPARATELY
4.
Remove the 4 screws on the speaker mount
5.
Unplug the OEM speaker from the enclosure
6.
Place the UTV Stereo speaker mount onto the OEM enclosure and secure
using included hardware
Scan to watch the Installation
Video!
7.
Connect the speaker wire harness to the UTV Stereo Speaker
8.
Plug in the speaker to the OEM plug
9.
Place the speaker into the enclosure and secure using included hardware
10.
Place enclosure back into the vehicle and plug in before securing to the roof
11.
Use the same OEM screws to secure the enclosure to the roof
Repeat for the other side
We are here to help! Reach out to us at info@utvstereo.com or call us at 480.616.2299
Documents / Resources
 |
UTV Stereo UTVS-XPD-RSA Powersports Audio Amplifier [pdf] Instruction Manual UTVS-XPD-RSA, UTVS-XPD-RSA Powersports Audio Amplifier, Powersports Audio Amplifier, Audio Amplifier, Amplifier |