OER-SR Series Access Controller
“
Specifications
- Product Name: Access Controller
- Model: V2.02
- Supported Models: Single-door, two-door, and four-door
controllers
Product Usage Instructions
1. Packing List
Contact your local dealer if the package is damaged or
incomplete. The package contents may vary with device model.
| No. | Name | Qty | Unit |
|---|---|---|---|
| 1 | Access controller (also referred to as controller) | 1 | PCS |
2. Instructions
This manual applies to single-door controllers, two-door
controllers, and four-door controllers.
2.1 Dimensions
The dimensions may vary with device model.
2.2 Structure and Wiring
The structure may vary with device model. The internal wiring
diagram is provided in the manual.
3. Installation Preparation
Installation location: Install the controller
in a secure and discreet location with easy maintenance access.
Device wiring: Plan wiring before installation,
including power cable, network cable, and Wiegand cable.
4. Mount Your Device
Wall Mount:
- Drill holes on the wall according to the holes on the back of
the controller.
5. Startup
After proper installation, connect power to start the device. It
is ready for use when the power indicator turns solid red.
6. Web Login
Default IP address: 192.168.1.150
Default username/password: admin / FFFFFFFF
Note: Set a strong password for security and
change it regularly to ensure authorized access only.
FAQ
Q: What should I do if the power indicator does not turn solid
red during startup?
A: Check the power connection and ensure proper installation.
Contact customer support if the issue persists.
“`
Access Controller
Quick Guide
V2.02
1 Packing List
Contact your local dealer if the package is damaged or incomplete. The package contents may vary with device model.
No.
Name
1
Access controller (also referred to as “controller”)
Qty
Unit
1
PCS
2*
Power cable
3
Screw components
4
Key (inside the controller)
5
Product documents
Remarks: * means optional and supplied with certain models only.
1
PCS
1
Set
2
PCS
1
Set
2 Instructions
This manual applies to single-door controllers, two-door controllers, and four-door controllers.
· Single-door controller: supports single-door two-way access control. · Two-door controller: supports two-door two-way access control. · Four-door controller: supports four-door two-way access control.
NOTE!
· The dimensions and structure may vary with device model. · The following takes four-door controller as an example.
2.1 Dimensions
The dimensions may vary with device model.
1
2.2 Structure and Wiring
The structure may vary with device model. The internal wiring diagram is shown as follows.
2
The corresponding status of indicators are illustrated as follows.
Indicator
Status
Description
Power indicator
Steady red
The controller is connected to power.
Operation indicator
Flashing green
The controller system runs normally.
Card reading indicator
Flashing yellow
The controller is reading card.
Lock indicator
Steady green
The controller is unlocking.
3 Installation Preparation
Installation location: It is recommended to install the controller in a secure and discreet location with easy access for maintenance.
Device wiring: Plan wiring before installation, including power cable, network cable, Wiegand cable, etc. The number of cables depends on the actual networking conditions.
Cable protection: Protect all the cables with PVC or galvanized conduits. Cable grounding: Make sure the controller is properly grounded. Tools: Prepare ESD wrist strap or gloves, Phillips screwdriver, electric drill, and tape
measure.
4 Mount Your Device
NOTE! The following takes wall mount as an example.
1. Drill holes on the wall according to the holes on the back of the controller, and knock expansion screws into the holes.
2. Open the controller cover with the key, and punch through the cable holes on the side. 3. Fix the controller to the wall. 4. Connect the power cable and other cables (refer to Structure and Wiring for details).
CAUTION! Be sure to disconnect power before connecting cables, otherwise the controller may be damaged. 5. Lock the controller cover with the key, and keep the key properly.
5 Startup
After the controller is installed properly, connect power to start it up. The device is ready for use after the power indicator turns solid red.
6 Web Login
Default IP address: 192.168.1.150 Default username/password: admin / FFFFFFFF
Note:
For security, please set a strong password of at least nine characters including uppercase and lowercase letters, digits, and special characters. You are strongly recommended to regularly change the device password and keep it secure to ensure that only authorized users can log in.
3
Disclaimer and Safety Warnings
Copyright Statement
©2024-2025 Zhejiang Uniview Technologies Co., Ltd. All rights reserved. No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us hereafter). The product described in this manual may contain proprietary software owned by Uniview and its possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means.
Trademark Acknowledgements
are trademarks or registered trademarks of Uniview. All other trademarks, products, services and companies in this manual or the product described in this manual are the property of their respective owners. Export Compliance Statement Uniview complies with applicable export control laws and regulations worldwide, including that of the People’s Republic of China and the United States, and abides by relevant regulations relating to the export, re-export and transfer of hardware, software and technology. Regarding the product described in this manual, Uniview asks you to fully understand and strictly abide by the applicable export laws and regulations worldwide. EU Authorised Representative UNV Technology EUROPE B.V. Treubstraa 1, 2288 EG, Rijswijk, Netherlands. If you have any feedback, please contact us at service@uniview.com. Privacy Protection Reminder Uniview complies with appropriate privacy protection laws and is committed to protecting user privacy. You may want to read our full privacy policy at our website and get to know the ways we process your personal information. Please be aware, using the product described in this manual may involve the collection of personal information such as face, fingerprint, license plate number, email, phone number, GPS. Please abide by your local laws and regulations while using the product. About This Manual This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc,
in this manual may be different from the actual appearances, functions, features, etc, of the product. This manual is intended for multiple software versions, and the illustrations and descriptions in this
manual may be different from the actual GUI and functions of the software. Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot
be held responsible for any such errors and reserves the right to change the manual without prior notice. Users are fully responsible for the damages and losses that arise due to improper operation. Uniview reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated. Disclaimer of Liability The product described in this manual is provided on an “as is” basis. Unless required by applicable law, this manual is only for informational purpose, and all statements, information, and recommendations in this manual are presented without warranty of any kind, expressed or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose, and noninfringement.
4
To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all damages for the product described in this manual (other than as may be required by applicable law in cases involving personal injury) exceed the amount of money that you have paid for the product.
Users must assume total responsibility and all risks for connecting the product to the Internet, including, but not limited to, network attack, hacking, and virus. Uniview strongly recommends that users take all necessary measures to enhance the protection of network, device, data and personal information. Uniview disclaims any liability related thereto but will readily provide necessary security related support.
To the extent not prohibited by applicable law, in no event will Uniview and its employees, licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the product or service, including, not limited to, loss of profits and any other commercial damages or losses, loss of data, procurement of substitute goods or services; property damage, personal injury, business interruption, loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the product, even if Uniview has been advised of the possibility of such damages (other than as may be required by applicable law in cases involving personal injury, incidental or subsidiary damage).
Network Security
Please take all necessary measures to enhance network security for your device. The following are necessary measures for the network security of your device: Change default password and set strong password: You are strongly recommended to change the
default password after your first login and set a strong password of at least nine characters including all three elements: digits, letters and special characters. Keep firmware up to date: It is recommended that your device is always upgraded to the latest version for the latest functions and better security. Visit Uniview’s official website or contact your local dealer for the latest firmware. The following are recommendations for enhancing network security of your device: Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device. Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security. Enable IP address filtering: Allow access only from the specified IP addresses. Minimum port mapping: Configure your router or firewall to open a minimum set of ports to the WAN and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full cone NAT. Disable the automatic login and save password features: If multiple users have access to your computer, it is recommended that you disable these features to prevent unauthorized access. Choose username and password discretely: Avoid using the username and password of your social media, bank, email account, etc, as the username and password of your device, in case your social media, bank and email account information is leaked. Restrict user permissions: If more than one user needs access to your system, make sure each user is granted only the necessary permissions. Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and the system will automatically forward port data, which results in the risks of data leakage. Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your router. Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this function, it is recommended you disable multicast on your network. Check logs: Check your device logs regularly to detect unauthorized access or abnormal operations. Isolate video surveillance network: Isolating your video surveillance network with other service networks helps prevent unauthorized access to devices in your security system from other service networks.
5
Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized physical access.
SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
Learn More
You may also obtain security information under Security Response Center at Uniview’s official website.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
Store or use the device in a proper environment that meets environmental requirements, including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
Make sure the device is securely installed or placed on a flat surface to prevent falling. Unless otherwise specified, do not stack devices. Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow
adequate space for ventilation. Protect the device from liquid of any kind. Make sure the power supply provides a stable voltage that meets the power requirements of the
device. Make sure the power supply’s output power exceeds the total maximum power of all the connected devices. Verify that the device is properly installed before connecting it to power. Do not remove the seal from the device body without consulting Uniview first. Do not attempt to service the product yourself. Contact a trained professional for maintenance. Always disconnect the device from power before attempting to move the device. Take proper waterproof measures in accordance with requirements before using the device outdoors.
Power Requirements
Install and use the device in strict accordance with your local electrical safety regulations. Use a UL certified power supply that meets LPS requirements if an adapter is used. Use the recommended cordset (power cord) in accordance with the specified ratings. Only use the power adapter supplied with your device. Use a mains socket outlet with a protective earthing (grounding) connection. Ground your device properly if the device is intended to be grounded.
Battery Use Caution
When battery is used, avoid: Extremely high or low temperature and air pressure during use, storage and transportation. Battery replacement.
Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.
Replace battery with an incorrect type; Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery; Dispose of the used battery according to your local regulations or the battery manufacturer’s
instructions. Avertissement de l’utilisation de la batterie Lorsque utiliser la batterie, évitez: Température et pression d’air extrêmement élevées ou basses pendant l’utilisation, le stockage
et le transport. Remplacement de la batterie. Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles mentionnées ici,
peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz inflammables. Remplacer la batterie par un type incorrect; Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper la
batterie;
6
Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du fabricant de la batterie.
Personal safety warnings: Chemical Burn Hazard. This product contains a coin cell battery. Do NOT ingest the battery. It can cause severe internal burns and lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Avertissements de sécurité personnelle: Risque de brûlure chimique. Ce produit contient une batterie de cellules. N’ingérer pas la batterie. Si la batterie de cellule est avalée, elle peut causer de graves brûlures internes en seulement 2 heures et peut entraîner la mort. Gardez les batteries nouvelles ou utilisées à l’écart des enfants. Si le compartiment de la batterie ne se ferme pas en toute sécurité, cessez d’utiliser le produit et gardez-le à l’écart des enfants. Si vous pensez que des piles ont pu être avalées ou placées à l’intérieur d’une partie du corps, consultez immédiatement un médecin. Regulatory Compliance FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Visit https://global.uniview.com/Support/Download_Center/Product_Installation/Declaration/ for SDoC. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
LVD/EMC Directive This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.
Battery Regulation- (EU) 2023/1542 Battery in the product complies with the European Battery Regulation (EU) 2023/1542. For proper recycling, return the battery to your supplier or to a designated collection point.
7
Documents / Resources
 |
Uniview OER-SR Series Access Controller [pdf] User Guide OER-SR42, OER-SR22, OER-SR12, OER-SR Series Access Controller, OER-SR Series, Access Controller, Controller |