UNICA logo

8-Channel Cloud Based Amplifier Platform

UNICA 8-Channel Cloud Based Amplifier Platform

UNICA 8-Channel Cloud Based Amplifier Platform - sambol 1

8-Channel Cloud Based Amplifier Platform

The Unica™ Series is a compact, 1RU amplifier platform developed primarily for installed applications. The 8-channel version includes 2kW, 4kW, and 8kW total power models, making Unica™ one of the most powerdense solutions available.
The output channels can drive Lo-Z and 70/100V lines seamlessly, delivering up to twice the rated power when asymmetrically loaded, resulting in 2000W @4Ω for the 8kW
model. The power supply allows worldwide operation (100240VAC), and it is equipped with the latest generation of singlestage power factor correction (PFC). The  roprietary Smart Rails Management (SRM) allows the supply rails to adapt in real time to the required output voltage to maximize efficiency and reduce idle losses.
Unica™ platform features Powersoft’s next-generation DSP for state-of-the-art processing and audio performance. The three 1Gb Ethernet ports, along with the native Dante™ and AES67 support allow for different network topologies including daisy-chain and Dante™ redundant.
The front panel display allows quick access to the amplifier operating status information for local monitoring. The PoE (Power over Ethernet) input allows for short recovery time in case of mains loss, as well as testing and monitoring loudspeakers 24/7 without the need for mains power.
Lastly, Unica™ Series amplifiers natively support cloud connectivity for remote monitoring and control from any device anywhere in the world via Universo™, the Powersoft
cloud platform interface.

  • Medium to large-scale venues
  • Main systems, central or distributed, subwoofers, hi-Z/lo-Z
  • Mission critical applications
  • Theatres, performance venues
  • Houses of worship
  • Convention centres
  • Business centres
  • Cruise ships

UNICA 8-Channel Cloud Based Amplifier Platform - fig 1

Specifications

Channel Handling
Number of output channels 8 Hi-Z or Lo-Z
(bridgeable per ch. pair)
Phoenix PC 5/8-STF1-7,62
Number of input channels
Analog 8 Phoenix MC 1,5/6-ST-3,81
Dante™ /AES67 8 3 x RJ45
Audio
Default gain 32 dB
Input sensitivity 2.84 Vrms / 11.3 dBu
Output noise floor (Analog Input) -72 dBV(A) typical
SNR (Analog Input) 112 dB(A)
Output noise floor (Dante™ /AES67 Input) -76 dBV(A) typical
SNR (Dante™ /AES67 Input) 116 dB(A)
Max input level >+24 dBu
Frequency Response 20 Hz – 20 kHz +0.0 dB/-1.0 dB, @ 8 Ω
Crosstalk <-80dB typical, 20Hz to 1 kHz range
<-60dB @20kHz typical
Input impedance 20 kΩ balanced
THD+N (from 0.1 W to Half Power) < 0.05%
SMPTE IMD (from 0.1 W to Half Power) < 0.01%
Damping factor >2500 20Hz to 500 Hz
DSP
AD converters 24 Bit Tandem™ @ 48 kHz
130 dB(A) Dynamic Range – 0.00005 % THD+N
DA converters 24 Bit Tandem™ @ 48 kHz
132 dB(A) Dynamic Range – 0.00003 % THD+N
Latency 2.6 ms analog Input to amplifier Output
Onboard memory Store and recall up to 50 amplifier snapshot
Delay 2 s (input) + 100 ms (output) for time alignment
Equalizer Raised-cosine, custom FIR, parametric IIR:
peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Crossover linear phase (FIR), Butterworth,
Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Limiters RMS voltage, RMS current, Peak limiter, TruePower™, Dynamic EQ
Damping control Active DampingControl™
Loudspeaker diagnostic Pilot tone monitoring, average impedance monitoring,
load impedance measurement
Startup time <10 s
<0.5 s (with PoE backup power)
Construction
Dimensions 489 x 400 x 44.3 (WxDxH) mm
19.3 x 15.8 x 1.7 (WxDxH) in
Weight 7.9 Kg (17.4 lb)
Output Stage 2K8 4K8 8K8  
Commercial total rated power 2000 4000 8000 W
Maximum output power per channel @ 100 V (symmetrical)* 250 500 800 W
per channel @ 70 V (symmetrical)* 250 500 1000 W
per channel @ 16 Ω (symmetrical)* 250 500 650 W
per channel @ 8 Ω (symmetrical)* 250 500 1000 W
per channel @ 4 Ω (symmetrical)* 250 500 1000 W
per channel @ 2 Ω (symmetrical)* 250 500 1000 W
per bridged pair @ 8 Ω (symmetrical)* 500 1000 2000 W
per bridged pair @ 4 Ω (symmetrical)* 500 1000 2000 W
per channel @ 100 V (asymmetrical)** 500 1000 2000 W
per channel @ 70 V (asymmetrical)** 500 1000 1500 W
per channel @ 16 Ω (asymmetrical)** 500 500 750 W
per channel @ 8 Ω (asymmetrical)** 500 1000 1500 W
per channel @ 4 Ω (asymmetrical)** 500 1000 2000 W
per channel @ 2 Ω (asymmetrical)** 500 1000 1000 W
Maximum unclipped output voltage 160 Vpeak
Maximum output current 30 40 48 Apeak

*: Available by driving and loading all the channels symmetrically.
**: Maximum power-sharing capacity per channel

Power & Thermal 2K8 4K8 8K8
ASTT @ AM@ I Power 65 65 65 W
Idle Current Draw 0.707 0.707 0.707 Arms
Thermal Loss 222 222 222 BTU/h
1/8
Power
@ 40
Idle
Power 406 729 1380 W
Current Draw 4. 6. 12 A rms
Thermal Loss S32 781 1297 BTU/h
Power 73 73 73 W
Current Draw 0.605 0.605 0.605
Thermal Loss 249 249 249 BTU/h
1/8
Power
@ 40
Power 412 724 1360 W
Current Draw 2. 4. 6. Arms
Thermal Loss 553 764 1228 BTU/h
Power supply Universal regulated switch mode with PFC and SRM
Nominal voltage 100-240 VAC @ 50-60 Hz (400 VAC surge)
Operating Voltage 80-265 VAC @ 50-60 Hz
AC Mains connector IEC C20 inlet (20 A max) region-specific power cord provided
Eco Mode consumption 43 W
Standby consumption 20 W Typical, CPU fully functional
PoE Input Class 4 or higher

Networking

Network 3 x Gigabit Ethernet ports RJ45 connectors
Network modes Switched Mode, Split-Redundant Mode
Remote interface ArmoníaPlus™, Universo™

POWERSOFT.COM

Documents / Resources

UNICA 8-Channel Cloud Based Amplifier Platform [pdf] Instructions
8-Channel Cloud Based Amplifier Platform, Cloud Based Amplifier Platform, 8-Channel Amplifier Platform, Amplifier Platform, Amplifier

References

Leave a comment

Your email address will not be published. Required fields are marked *