Powersoft - Driving Human Audio Experience
Instructions for UNICA models including: 8-Channel Cloud Based Amplifier Platform, Cloud Based Amplifier Platform, 8-Channel Amplifier Platform, Amplifier Platform, Amplifier
POWERSOFT Unica 8K8 - Installationsendstufe - Endstufen - GoWild AG
POWERSOFT Unica 4K8 - Installationsendstufe - Endstufen - GoWild AG
Powersoft UNICA 4K8 - ePRODANCE.cz
File Info : application/pdf, 2 Pages, 453.61KB
DocumentDocumentUnicaTM 8-Channel Cloud Based Amplifier Platform The UnicaTM Series is a compact, 1RU amplifier platform developed primarily for installed applications. The 8-channel version includes 2kW, 4kW, and 8kW total power models, making UnicaTM one of the most powerdense solutions available. The output channels can drive Lo-Z and 70/100V lines seamlessly, delivering up to twice the rated power when asymmetrically loaded, resulting in 2000W @4 for the 8kW model. The power supply allows worldwide operation (100240VAC), and it is equipped with the latest generation of singlestage power factor correction (PFC). The proprietary Smart Rails Management (SRM) allows the supply rails to adapt in real time to the required output voltage to maximize efficiency and reduce idle losses. UnicaTM platform features Powersoft's next-generation DSP for state-of-the-art processing and audio performance. The three 1Gb Ethernet ports, along with the native DanteTM and AES67 support allow for different network topologies including daisy-chain and DanteTM redundant. The front panel display allows quick access to the amplifier operating status information for local monitoring. The PoE (Power over Ethernet) input allows for short recovery time in case of mains loss, as well as testing and monitoring loudspeakers 24/7 without the need for mains power. Lastly, UnicaTM Series amplifiers natively support cloud connectivity for remote monitoring and control from any device anywhere in the world via UniversoTM, the Powersoft cloud platform interface. f Medium to large-scale venues f Main systems, central or distributed, subwoofers, hi-Z/lo-Z f Mission critical applications f Theatres, performance venues f Houses of worship f Convention centres f Business centres f Cruise ships POWERSOFT.COM UnicaTM 8-Channel Cloud Based Amplifier Platform Specifications Channel Handling Number of output channels Number of input channels Analog DanteTM/AES67 8 Hi-Z or Lo-Z (bridgeable per ch. pair) 8 8 Audio Default gain Input sensitivity Output noise floor (Analog Input) SNR (Analog Input) Output noise floor (DanteTM/AES67 Input) SNR (DanteTM/AES67 Input) Phoenix PC 5/8-STF1-7,62 Phoenix MC 1,5/6-ST-3,81 3 x RJ45 32 dB 2.84 Vrms / 11.3 dBu -72 dBV(A) typical 112 dB(A) -76 dBV(A) typical 116 dB(A) Max input level Frequency Response Crosstalk >+24 dBu 20 Hz - 20 kHz +0.0 dB/-1.0 dB, @ 8 <-80dB typical, 20Hz to 1 kHz range <-60dB @20kHz typical Input impedance THD+N (from 0.1 W to Half Power) SMPTE IMD (from 0.1 W to Half Power) Damping factor 20 k balanced < 0.05% < 0.01% >2500 20Hz to 500 Hz DSP AD converters DA converters Latency 24 Bit TandemTM @ 48 kHz 130 dB(A) Dynamic Range - 0.00005 % THD+N 24 Bit TandemTM @ 48 kHz 132 dB(A) Dynamic Range - 0.00003 % THD+N 2.6 ms analog Input to amplifier Output Onboard memory Store and recall up to 50 amplifier snapshot Delay 2 s (input) + 100 ms (output) for time alignment Equalizer Crossover Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR) Limiters RMS voltage, RMS current, Peak limiter, TruePowerTM, Dynamic EQ Damping control Active DampingControlTM Loudspeaker diagnostic Pilot tone monitoring, average impedance monitoring, load impedance measurement Startup time <10 s <0.5 s (with PoE backup power) Construction Dimensions Weight Data subject to change without notice. 489 x 400 x 44.3 (WxDxH) mm 19.3 x 15.8 x 1.7 (WxDxH) in 7.9 Kg (17.4 lb) Output Stage 2K8 4K8 8K8 Commercial total rated power 2000 4000 8000 W per channel @ 100 V (symmetrical)* 250 500 800 W per channel @ 70 V (symmetrical)* 250 500 1000 W per channel @ 16 (symmetrical)* 250 500 650 W per channel @ 8 (symmetrical)* 250 500 1000 W Maximum output power per channel @ 4 (symmetrical)* 250 500 1000 W per channel @ 2 (symmetrical)* 250 500 1000 W per bridged pair @ 8 (symmetrical)* 500 1000 2000 W per bridged pair @ 4 (symmetrical)* 500 1000 2000 W per channel @ 100 V (asymmetrical)** 500 1000 2000 W per channel @ 70 V (asymmetrical)** 500 1000 1500 W per channel @ 16 (asymmetrical)** per channel @ 8 (asymmetrical)** 500 500 750 W 500 1000 1500 W per channel @ 4 (asymmetrical)** 500 1000 2000 W per channel @ 2 (asymmetrical)** 500 1000 1000 W Maximum unclipped output voltage Maximum output current 160 30 40 **:*A: Mvaailxaibmleumbypdorwiveinrg-sahnadrinlogacdaipnagcaitllytpheercchhaannnneelsl symmetrically. Vpeak 48 Apeak @ 115 V @ 230 V Power & Thermal Idle 1/8 Power @ 4 Idle 1/8 Power @ 4 Power Current Draw Thermal Loss Power Current Draw Thermal Loss Power Current Draw Thermal Loss Power Current Draw Thermal Loss Power supply Nominal voltage Operating Voltage AC Mains connector Eco Mode consumption Standby consumption PoE Input 2K8 4K8 8K8 65 0.707 222 406 3.61 532 73 0.605 249 412 2.24 553 65 0.707 222 729 6.44 781 73 0.605 249 724 3.51 764 65 0.707 222 1380 12 1297 73 0.605 249 1360 6.1 1228 W Arms BTU/h W Arms BTU/h W Arms BTU/h W Arms BTU/h Universal regulated switch mode with PFC and SRM 100-240 VAC @ 50-60 Hz (400 VAC surge) 80-265 VAC @ 50-60 Hz IEC C20 inlet (20 A max) region-specific power cord provided 43 W 20 W Typical, CPU fully functional Class 4 or higher Networking Network Network modes Remote interface 3 x Gigabit Ethernet ports RJ45 connectors Switched Mode, Split-Redundant Mode ArmoníaPlusTM, UniversoTM POWERSOFT.COM