UNI-T UTG7000B Series Signal Source Function Arbitrary Waveform Generator User Manual

The name of command string 2: command parameter@ attribute 1: attribute value@ attribute 2: attribute value … @ attribute n: attribute value;
The name of command string n: command parameter@ attribute 1: attribute value@ attribute 2: attribute value … @ attribute n: attribute value;

Description

It is not case-sensitive;
Numerical value support the format of hexadecimal, octal and decimalism;

Support multiple statements (depends on model), if multiple statements and attributes on failure, try to using single statement and attribute;
Every statement must end with ‘;’；

Spaces are supported between names, values, and tags;
Example：
“wp@ch:0@addr:10@v:10;” “key: c1;”
Term： SG – short name of Signal Source

General Command

Name of command	Meaning	IO	Data	Note
Local	Lock Pad	W	Enum:0/1{remote/local status}	Keyboard locked in remote status
Local?	Query keyboard is locked or not	R	Enum:0/1{unlocked/locked}
Lock?	Query the lock status of keyboard	R	8Bytes，64 signed integer, flag bit

Write Parameter

Name of command	Command parameter	Type of command parameter
wp	None	None

Name of attribute	Meaning	IO	Data
CH	Number of channel	W	Enum(Integer) : 0/1{ CH1/ CH2 }
addr	Parameter address	W	Enum(ParamNo): view the definition of parameter address
v	Parameter value	W	Value usually measured by the smallest unit

Example：
“wp@CH:0@addr:9@v:1000;” – set the frequency of CH1 is 1mHz；

Note：
UCI corresponding interface: uci_Write

Read Parameter

Name of command	Command parameter	Type of command parameter
rp	None	None

Name of attribute	Meaning	IO	Data
CH	Number of channel	W	Enum(Integer) : 0/1{ CH1/ CH2 }
addr	Parameter address	W	Enum(ParamNo): view the definition of parameter address

Example：
“rp@CH:0@addr:9;” – read the frequency of CH1；

Note：
UCI corresponding interface: uci_Read， corresponding data size are 8 bytes, double types！

Key

Name of command	Command parameter	Type of command parameter
KEY	Key value	See key code as below

KEY	Character encoding	KEY	Character encoding
Bottom function key 1	AF1	0	0
Bottom function key 2	AF2	1	1
Bottom function key 3	AF3	2	2
Bottom function key 4	AF4	3	3
Bottom function key 5	AF5	4	4

Bottom function key	6	AF6	5	5
F1	F1		6	6
F2	F2		7	7
F3	F3		8	8
F4	F4		9	9
Menu	MENU		.	.
Knob Left	FKNL		+/-	SIGN
Knob Right	FKNR		Trigger	TG
Knob Click	FKN		Utility	UTIL
Left	L		CH1	C1
Right	R		CH2	C2

Name of attribute	Meaning	IO	Data
Lock	Lock the keyboard	W	No data
Unlock	Unlock the keyboard	W	No data
Lock?	Query the lock status of keyboard	R	Integer<4Bytes>： 0 – unlocked； 1 – locked

Example：
- “KEY:c1;” — CH1
- “KEY:c2;” — CH2
- “KEY:c2@lock;” — CH2 locked the key
- “KEY:c2@unlock;” — CH2 unlocked the key
- “KEY:c2@lock?;” — Query keyboard locked or not
Note：
Command with question mark read in uci_Read . The status gets from the interface return value.

Read and Write Configuration File

Name of command	Command parameter	Type of command parameter
dconfig	None	None

Example：
“dconfig;”
Note：
Use the interface uci_Readto read，buffer area size can set as 1024Bytes，the actual of effective data is defined by the interface return value. Use the interface uci_WriteFromFile to write configuration data, which does not recognize the file suffix, it can only recognize command “dconfig;”, write configuration timeout at least 6s.

Capture Screen

Name of command	Command parameter	Type of command parameter
PrtScn	Picture format	Enum(String):null/zip/bmp {unpacked pixel data/packed pixel data /BMP file data

Example：
- “PrtScn:bmp;” — screenshot saved as bmp file data；
- “PrtScn;” — screenshot saved as pixel file data；
- “PrtScn:zip;” — screenshot saved as packed pixel file data；

Note ：
Use uci_Read to read data，the command has no saved data file, it should return to the specified buffer area of uci_Read . If you want to buffer a local file, please save it by yourself.

If use command： “PrtScn;”，buffer area size must be >=391680(480* 272* 3)，readout is 24bits of pixel data;

If use command：“PrtScn:bmp;”，buffer area size must be 480* 272* 3 + 54 = 391734,that is the size of picture.
If use command： “PrtScn:zip;”， buffer area size can set >=391680 (480* 272* 3 )（maximum data volume）, readout is packed pixel data. And then use the interface：alg_UnCompressPixels_25 to unzipping data.
Note: uci_Read return value is packed data volume
Use the interface uci_ReadToFile to add the command “prtscn:bmp;”, it can save bitmap to disk file.

Write Random Wave File

Name of command	Command parameter	Type of command parameter
WARB	None	None

Name of attribute	Meaning	IO	Data
CH	Number of channel	W	Enum(Integer) : 0/1{ CH1/ CH2 }
Mode	Loading mode	W	Enum(Integer): 0/1 {Carrier/Mod}

Example：
“WARB@CH:0@MODE:0;” Loading wave file as carrier wave form into to CH1
Note：
use the interface uci_WriteFromFileto to write random wave file, timeout set to 1000.

Appendix

Parameter address

Numerical value unit：

Frequency unit ： μHz， 1mHz° set value 1*1000；
Voltage unit : μV
Time unit ：ns（ns、μs、ms、s）, for example 1s return value is 1*1000^3
Degree unit：0.01°，phase set to 90°，return value is 90 * 100
Percent unit 0.01%，for example duty cycle, return value= input value *100

Keyboard Locked Status Mark Bits

Documents / Resources

UNI-T UTG7000B Series Signal Source Function Arbitrary Waveform Generator [pdf] User Manual
UTG2000A, UTG7000B Series, UTG7000B Series Signal Source Function Arbitrary Waveform Generator, UTG7000B Series, Signal Source Function Arbitrary Waveform Generator, Function Arbitrary Waveform Generator, Arbitrary Waveform Generator, Waveform Generator, Generator

References

User Manual

UNI-T UTG7000B Series Signal Source Function Arbitrary Waveform Generator

Introduction

Reference File

Basic Format of Command String