U-PROX WDC Uni Wireless Magnetic Door Contact With Shock and Tilt Detection

USER MANUAL

WIRELESS MAGNETIC DOOR/WINDOW CONTACT WITH SHOCK AND TILT DETECTION

Is a part of the U-PROX security alarm system

Manufacturer: LLC INTEGRATED TECHNICAL VISION
Mykoly Hrinchenka str. 2/1, 03038, Kyiv, Ukraine

U-PROX WDC Uni – is a wireless detector with magnetic contact, shock and tilt sensor. The detector is designed to control the status of structural elements – windows or doors (open/close/change of inclination angle/shock detection). The device sends an alarm notification to the alarm center U-PROX security alarm system. The detector has connector for connecting the arming information LED and external sensor, e.g. reed switch.

1. U-PROX WDC Uni; 2. Magnets – 2 pcs.; 3. CR123A battery (pre-installed); 4. Mounting kit; 5. Quick start guide

The device is connected to the control panel and is configured with the U-PROX Installer mobile application.

Wireless Magnetic Door Contact

Functional parts of the device (see picture)

1. Bottom plate of magnet case
2. Magnet case cover
3. Neodymium magnet
4. Bottom plate of the detector case
5. Detector case top cover
with the device
6. Magnet position marks
7. LED indicator
8. Plastic protector of device board
9. Tamper switch

10. Connector for external sensor and LED:
– LD contact (+ LED, red)
– GND contact (ground, blue)
– DC contact (sensor, yellow)
11. On/off button
12. Battery CR123A
13. External sensor (reed switch)
14. External LED
15. Rubber seal

REGISTRATION

Wireless Magnetic Door Contact

RANGE TEST FOR OPTIMAL

Wireless Magnetic Door Contact

INSTALLATION LOCATION

 

Wireless Magnetic Door Contact

INDICATION IN RANGE TEST MODE

 

Wireless Magnetic Door Contact

INSTALLATION

Wireless Magnetic Door Contact

 

Wireless Magnetic Door Contact

 

 

Wireless Magnetic Door Contact

AN EXTERNAL SENSOR CONNECTION

 

Wireless Magnetic Door Contact

AN EXTERNAL LED CONNECTION

Wireless Magnetic Door Contact

MAGNETS

 

Wireless Magnetic Door Contact

 

TECHNICAL SPECIFICATIONS

Wireless Magnetic Door Contact

COMPLETE SET

1. U-PROX WDC Uni; 2. Magnets – 2 pcs.; 3. CR123A battery (pre-installed); 4. Mounting kit; 5. Quick start guide

CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY

Warranty for U-PROX devices (except batteries) is valid for two years after the purchase date. If the device operates incorrectly, please contact support@u-prox.systems at first, maybe it can be solved remotely.

LLC INTEGRATED TECHNICAL VISION declares, that the U-PROX

WDC Uni complies with the Radio Equipment Directive  2014/53/EU and with the Directive 2011/65/EU (RoHS).

The original Declaration of Conformity is available on the website www.u-prox.systems in the Certificates section.

Wireless Magnetic Door Contact

 

SPECIFICATION

  • Zones: 2, adjustable
  • Functions: built-in reed switch, external  input with pulse counter, external input, shock sensor, tilt sensor
  • Reed switch: threshold 7-15 mm, operations > 1,000,000
  • Power: 3V, CR123A lithium battery included
  • Service life of battery: up to 5 years
  • Radio frequency: ISM-band wireless interface with several channels
  • Communication: ITU region 1: 868.0 to 868.6 MHz (EU, UA), bandwidth 100kHz, 20 mW max., up to 4800m (in line of sight)
  • Permissible humidity: up to 95%
  • Security grade: 2
  • Dimensions & weight: 85mm x 20.9mm x 20.4mm & 0.1kg
  • Magnets dimensions: standard – 85mm x 14.3mm x 13.1mm, slim – 85mm x 11mm x 6mm
  • Case colour: white, brown, black

Product Usage Instructions

Installation:

Follow the mounting instructions provided in the quick start guide to install the U-PROX WDC Uni on windows or doors.

Connecting External Sensor and LED:

Use the connector provided on the device to connect an external sensor such as a reed switch and an LED for arming information.

Battery Replacement:

To replace the CR123A battery, carefully remove the bottom plate of the detector case and replace the battery with a new one.

Configuration:

Use the U-PROX Installer mobile application to configure the device with the control panel.

Indicator Lights:

The LED indicator on the device will provide visual notifications for different statuses of the detector.


Frequently Asked Questions (FAQ)

Q: How long does the battery last in the U-PROX WDC Uni?

A: The included CR123A lithium battery can last up to 5 years under normal operating conditions.

Q: What is the communication range of the device?

A: The device has a communication range of up to 4800m in line of sight, depending on the region’s radio frequency specifications.

Q: Can I use multiple U-PROX WDC Uni devices in one security alarm system?

A: Yes, you can use multiple devices to monitor different windows or doors within the same U-PROX security alarm system.

Documents / Resources

U-PROX WDC Uni Wireless Magnetic Door Contact With Shock and Tilt Detection [pdf] User Manual
WDC Uni Wireless Magnetic Door Contact With Shock and Tilt Detection, WDC Uni, Wireless Magnetic Door Contact With Shock and Tilt Detection, Contact With Shock and Tilt Detection, Tilt Detection

References

Leave a comment

Your email address will not be published. Required fields are marked *