U-PROX WDC Plus Wireless Magnetic Door Window Contact Detector User Manual

Functions: Built-in reed switch, external input with pulse counter, external input, tilt sensor
Reed Switch: Threshold 7-15 mm, operations > 1,000,000

Power Output: 3V, 1 mA max.
Power: 3V, CR123A lithium battery included

Service Life of Battery: Up to 5 years (without AUX consumption)
Radio Frequency: ISM-band wireless interface with several channels

Communication: Secure two-way communication, sabotage detection, key – 256 bits
Permissible Humidity: Up to 95%

Environmental Class: III (according to EN 50131-1)
Security Grade: 2

Dimensions & Weight: 85 x 20.9 x 20.4 mm & 66 grams
Magnet Dimensions: 85 x 11 x 6mm

Case Color: White, dark brown, black

Product Usage Instructions

Installation and Setup

Open the U-Prox WDC Plus package and ensure all components are included.
Select a suitable location on the door or window frame to install the detector.

Mount the detector using the provided mounting kit.
Insert the CR123A battery into the device.

Download and install the U-Prox Installer mobile application on your smartphone.
Follow the in-app instructions to configure the detector to your security alarm system.

Usage
The U-Prox WDC Plus is designed to monitor the status of windows or doors. It can detect open/close events and changes in inclination angle.

Maintenance
Check the battery status regularly and replace it when necessary to ensure continuous operation of the detector.

Frequently Asked Questions (FAQ)

Q: How many security zones can the U-Prox WDC Plus control?
A: The device can control up to 2 security zones.

Q: What is the communication range of the device?
A: The device has a communication range of up to 4800m in line of sight, depending on the region.

WIRELESS MAGNETIC DOOR/WINDOW CONTACT WITH TILT DETECTION
Is a part of the U-Prox security alarm system User manual

Manufacturer:
Integrated Technical Vision Ltd. Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine

U-Prox WDC Plus – is a wireless detector with magnetic contact, EN pulse counter, and tilt sensor. The device is designed to control the status of structural elements – windows or doors (open/close/change of inclination angle).

The dectector controls up to 2 security zones. The device sends an alarm notiﬁcation to the alarm center U-Prox security alarm system.
The detector has a connector for connecting external sensors, e.g. reed switch.
The device is connected to the control panel and is connected with the U-Prox Installer mobile application.

Functional parts of the device (see picture)

The bottom plate of magnet case
Magnet case cover
Neodymium magnet
Bottom plate of the detector case
Detector case top cover with the device
Magnet position marks
LED indicator
Plastic protector of device board
Tamper switch
Connector for external sensor: GND contact (ground, blue) DC contact (sensor, yellow)
On/off button
Battery CR123A
External sensor (reed switch)

AUX – power output
Rubber seal

TECHNICAL SPECIFICATIONS

COMPLETE SET

U-Prox WDC Plus;
Magnet;
CR123A battery (pre-installed);

Mounting kit;
Quick start guide

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY

Warranty for U-Prox devices (except batteries) is valid for two years after the purchase date.
If the device operates incorrectly, please contact support@u-prox.systems first, maybe it can be solved remotely.

REGISTRATION

RANGE TEST FOR OPTIMAL INSTALLATION LOCATION

Due to the Grade 2 requirement, RF link works with a reduction of power in 8 dB

INDICATION IN RANGE TEST MODE

INSTALLATION

AN EXTERNAL SENSOR CONNECTION

www.u-prox.systems
support@u-prox.systems
www.u-prox.systems/doc_wdcplus

Documents / Resources

U-PROX WDC Plus Wireless Magnetic Door Window Contact Detector [pdf] User Manual
WDC Plus Wireless Magnetic Door Window Contact Detector, WDC Plus, Wireless Magnetic Door Window Contact Detector, Magnetic Door Window Contact Detector, Door Window Contact Detector, Window Contact Detector, Contact Detector, Detector

References

User Manual