U-PROX Multiplexer User Manual

User manual

Multiplexer

WIRED ALARM INTEGRATION MODULE
Is a part of the U-Prox security alarm system
Manufacturer: Integrated Technical Vision Ltd.
Vasyl Lypkivsky str. 1, 03035, Kyiv, Ukraine

https://www.u-prox.systems/doc_multiplexer

U-Prox Multiplexer – is a wireless module designed to connect wired equpment (detectors, IR barriers, gas detectors, wired sirens etc) to wireless U-Prox control panel. Has power output, switched power output and built-in LiIon batteries to power backup. It is installed indoors.
The device is connected to the control panel and is configured with the U-Prox Installer mobile application.

https://u-prox.systems/Installer

Functional parts of the device (see picture)

1. Device case 2. Light indicator 3. Case back cover 4. Сonduit for wires 5. Locking screw 6. Tamper case 7. Upper part of the device, rear view

8. Connector 9. On/off button 10. Battery compartment 11. Bottom plate of device 12. Tamper switch 13. Bottom plate connector 14. Power supply connector

TECHNICAL SPECIFICATIONS

Inputs	8 (Z1 … Z8)
Output	1 relay (NO C)
LED	+3 V
Power output	2 outputs, AUX and SWA (switchable output),resettable fuse protected, 200 mA @12V
Power supply	10.8 … 13.8VDC
Battery backup	two 2500 mAh batteries, up to 10 hours (8 wired detectors, 15 mA each)
Radio frequency	ISM-band wireless interface2 with several channels ITU region 1 (EU, UA):  868.0 to 868.6 MHz,bandwidth 100kHz, 20 mW max.,up to 4800m (in line of sight) ITU region 3 (AU): 916.5 to 917 MHz,bandwidth 100kHz, 20 mW max.,up to 4800m (in line of sight)
Communication	Secure two way communication,sabotage detection, key – 256 bits
Dimensions & weight	0°C to +45°C
Operating temperature range	167 х 120 х 38 mm  &  0.64 kg
Case colour	white

COMPLETE SET

1. U-Prox Multiplexer;
2. Two 18650 batteries (pre-installed);
3. Quick start guide

CAUTION. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE USED BATTERIES ACCORDING TO THE NATIONAL REGULATIONS

WARRANTY

Warranty for U-Prox devices (except batteries) is valid for two years after the purchase date.
If the device operates incorrectly, please contact support@u-prox.systemsat first, maybe it can be solved remotely.

REGISTRATION

RANGE TEST FOR OPTIMAL INSTALLATION LOCATION

Due to Grade 2 requirement RF link works with reduction of power in 8 dB

INDICATION IN RANGE TEST MODE

INSTALLATION

INDICATION

LED CONNECTION

SENSORS CONNECTION

adjustable alarm sign (NO or NC) for each input

www.u-prox.systems
support@u-prox.systems
www.u-prox.systems/doc_multiplexer